• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.618-623
• /
• 2003

Solvent extraction experiments for separation of impurities from Ni-rich solution were carried out for manufacturing of high purity Ni compounds from acid leaching solution of spent Ni-Cd secondary battery. Artificial and leaching solutions were used as aqueous phases and PC88A saponified by sodium in kerosene were used as organic phase. The extraction order is Zn>Mn>Co>Ni and extraction percentage of metal ions was increased with increase of the concentration of extractant, initial pH of aqueous phase and ratio of O/A. The separation of cobalt, zinc and manganese from nickel was effectively accomplished at the condition of extraction stage=l, O/A=1 and initial pH 5.0 with 1.0 $mol/dm^3$ PC88A saponified to $50\%$ with NaOH.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.237-242
• /
• 2011

In this study, the catalytic activity of Mn-Phthalocyanine (Mn-PC) for VOCs (acetadehyde, propionaldehyde and toluene) combustion was determined. The reaction was carried out in a fixed bed reactor at the temperature range of $200{\sim}380^{\circ}C$. We investigated the physicochemical properties of Mn-PC before and after the pretreatment (air, $450^{\circ}C$, 1 hr, 60 cc/min) by TGA (Thermogravimetric Analyzer), BET (Brunauer Emmett Teller), EA (Elemental Analyzer), XRD (X-ray Diffractometer) and SEM (Scanning Electronic Microscope). By TGA analysis, 88 wt.% mass loss of Mn-PC was found at $419^{\circ}C$. The BET surface area of Mn-PC increased after the pretreatment. The decomposition and combustion of organic components in Mn-PC were observed by EA analysis. We also confirmed that Mn-PC had transformed into a new manganese oxide phase ($Mn_3O_4$) after the pretreatment by XRD analysis. By SEM analysis, many of the micropores generated during the pretreatment were found. The catalytic activity of Mn-PC with the pretreatment for propionaldehyde combustion was higher than that of $Mn_3O_4$ and fresh Mn-PC. It showed the catalytic activity of Mn-PC with the pretreatment for VOCs combustion by the order of toluene < acetadehyde < propionaldehyde.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.602-616
• /
• 2023

Fifteen types of rice collected from Kurdistan region-Iraq were investigated by principal component analysis (PCA) in terms of physical properties and cooking characteristics. The dimensions of evaluated grains correspond to 5.05-8.75 mm for length, 1.54-2.47 mm for width, and 1.37-1.95 for thickness. The equivalent diameter was in the range of 5.23-10.03 mm, and the area took 13.30-28.25 mm². The sphericity analysis values varied from 0.32 to 0.56, the aspect ratio from 0.17 to 0.39, and the volume of the grain was measured in the range from 4.48 to 17.74 mm³, hectoliter weight values were 730-820 kg/m³, and true density from 0.6 to 0.96 g/cm³. The broken grain ratio was 1.5-18.3%, thousand kernel weight corresponded to 15.88 to 22.42 g. The water uptake ratios for 30 min of soaking were increased at 60℃ compared to 30 and 45℃. The PCA was used to study the correlation of the most effective factors. Results of PCA showed that the first (PC1) and second (PC2) components retained 63.4% and 34.8% of the total variance, which PC1 was mostly related to hectoliter, broken ratio, and moisture content characteristics while PC2 was mostly concerned with hardness and true density. For cooking properties, the PC1 and PC2 retained 88.5% and 9.3% of the total variance, respectively. PC1 was mostly related to viscosity, spring value, and hardness after cooking, while PC2 was mostly concerned with spring value, hardness before cooking, and hardness after cooking.

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.323-327
• /
• 2001

• Korean Journal of Food Science and Technology
• /
• v.52 no.2
• /
• pp.200-203
• /
• 2020

The effect of stigmasterol (SS), a phytosterol, in the liposome bilayer on the stability of encapsulated ascorbic acid (ASA) was evaluated. Liposomes, consisting of phosphatidylcholine (PC) and SS, and ASA were encapsulated by the dehydration/rehydration method. The average particle size of the liposome increased with increasing SS content. SS significantly increased the stability of encapsulated ASA. For example, ASA remaining in the liposomes of 100:0, 90:10, and 70:30 (PC:SS, w/w) ratios was 34.12%, 49.88%, and 58.58%, respectively, after storage for 8 days at 4℃, while only 7.66% ASA remained in the buffer under the same conditions. These results indicated that SS in liposomes increased the stability of encapsulated ASA.

• Journal of Environmental Science International
• /
• v.6 no.2
• /
• pp.133-139
• /
• 1997

The solvent extraction method was applied on the wastewater produced during malonate(malonic acid esters) process to recover cobalt. DEHPA and PC88A were used as organic solvent From separation funnel experiment(batch experiment), the effects of vari- ous parameters (pH, cobalt concentration, reaction rate, and stripping temperature) on solvent extraction were examined and these data were used to derive equilibrium curve. A mixer-settler experiment (continuous experiment) of bench scale was also carried out for the plant construction and a Mccabe-Thiele diagram was obtained. The results of these experiments indicate that cobalt is recoverable above 99 oyo and that its purity as cobalt sulfate Is higher than 99.9 wt%.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.51-57
• /
• 2020

Separation of Co and Ni over Mg from the sulfuric acid solutions using Cyanex272, PC88A and Versatic acid 10 as an extractant was carried out. From the comparative studies about the extraction behavior of Co, Ni and Mg, Versatic acid 10 was superior to Cyanex272 and PC88A for the selective extraction of cobalt and nickel from the mixed solutions. About 98% of Ni and Co were extracted at equilibrium pH 7.0 and less than 5% of Mg was co-extracted by Versatic acid 10. McCabe-Thiele diagram indicated two stages requirement for Co and Ni extraction by 10% Versatic acid 10 at pH 7.0 and phase ratio (A/O) of 2.0. The loaded Co and Ni in organic phase was stripped effectively the sulfuric acid concentration above 70 g/L. 99.78% of cobalt and 98.42% of nickel were stripped.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.88-95
• /
• 2005

Melt blending of Bisphenol A polycarbonate (PC) and poly(trimethylene terephthalate) (PTT) was carried out over the entire composition range. The mixing time was varied up to 90 min. The resulting samples were analyzed by FT-IR, DSC, XRD, DMTA, $^{1}H NMR$, and SEM. The process of transesterification between the two polymers and their resulting compatibilization were observed. The behaviors of the PTT-rich and PC-rich blends were different and an equilibrium was found to exist. Peculiar behavior, which was different from that of the PTT-rich and PC-rich blends, was exhibited by the 50/50 (PTT/PC) blend.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.69-75
• /
• 2019

In this study, the combustibility of five types of plastic plates, fiber reinforced plastic (FRP), polystyrene (PS), polycarbonate (PC), polypropylene (PP), and polyvinyl chloride (PVC), were tested using a cone calorimeter (ISO 5660). The PVC plate showed a $44.65kW/m^2$ lower peak heat release rate (HRR) and a $30.97kW/m^2$ lower maximum average rate of heat emission than the other four types of plastics, whereas the PS plate showed a $773.44kW/m^2$ higher peak HRR and $399.14kW/m^2$ higher maximum average rate of heat emission. The PC plate and PS plate showed the highest HRR by a maximum of 3.88 times in $CO_{mean}$ yields, while the PS pate and PP plate showed the highest HRR by a maximum 4.88 times in $CO_{2mean}$ yields. In addition, the smoke performance index (SPI) of the PS plate decreased by 74.81%~95.99%; the smoke growth index (SGI) increased to 76%~300%; the smoke intensity (SI) also increased to 917.73% ~ 9607.57%, and the danger of smoke increased. The PS plate was found to have the highest risk of life damage due to smoke on the thermal and smoke sides.

• Journal of Plant Biology
• /
• v.36 no.4
• /
• pp.415-423
• /
• 1993

대두의 uricase II cDNA를 탐침으로 plaque 혼성화 방법에 의해 해녀콩의 뿌리를 cDNA library로부터의 두 개의 phage 클론(λCINUO-01, λCINUO-02)을 선별하였다. 두 phage 클론은 약 1.6 kb와 1.0 kb의 insert를 갖고 있었으며 이들의 염기서열을 결정하기 위하여 pUC19과 pBSKS vector에 subcloing(pcCLNUO-01, pcCLNUO-02)하였다. Sanger법에 의해 염기서열을 결정한 결과, 두 클론은 각각 1,611 bp와 1,024 bp로 이루어져 있었으며 pcCINUO-01은 308개의 아미노산, pcCINUO-02는 301개의 아미노산을 암호화하는 open reading frame(ORF)을 갖고 있었다. 두 클론의 ORF의 염기서열은 대두의 uricase II와 각각 88.9%, 89.3%의 상동성을 보여주었으며, 아미노산 서열은 84.1%, 85.4%의 상동성을 보여주었다. pcCINUO-01의 경우, 종결코돈으로부터 313 NT 하류쪽에 진핵생물의 poly(A) 첨가신호인 AATAAA 서열이 존재하였으며 이로부터 21 NT 하류쪽에 17 잔기의 poly(A)가 존재하였다. 두 클론의 염기서열에서 추정된 아미노산 서열의 카르복시 말단에는 세포질에서 합성된 몇몇 단백질들이 peroxisome으로 수송되는데 필요한 신호서열인 Ser-Lys-Leu-COOH 서열이 존재하고 있었다. 두 클론의 염기서열을 토대로 아미노산 조성을 살펴본 결과, 염기성 아미노산(Arg, His, Lys)과 산성 아미노산(Asp, Glu)이 각각 46 대 35, 47 대 35의 비를 보여주었는데 이는 uricase II 단백질의 염기성 성질을 보여주는 결과로 추정된다. Northern 혼성화 결과 해녀콩에서 uricase II는 뿌리혹에서만 특이적으로 발현됨을 알 수 있었고 게놈 혼성화 반응 결과는 uricase II 유전자가 해녀콩 게놈상에 유전자 가족으로는 존재할 수 있음을 보여주었다.