• 폴리머
• /
• 제38권3호
• /
• pp.320-326
• /
• 2014

본 연구에서는 polycarbonate(PC)/acrylonitrile-butadiene-styrene(ABS) 블렌드의 고속 전단 가공 조건하에서의 열적 물성 변화에 대해 연구하였다. 고전단 압출 성형기(NHSS2-28)를 이용하여 공정조건인 스크류 회전속도와 전단 부하 시간을 변화시키면서 가공하였다. 고전단 부하 실험 후에 유리전이온도($T_g$) 변화를 조사하여, 전단 부하 조건에 따라 약 $143^{\circ}C$에서 약 $133^{\circ}C$로 감소하는 경향을 관찰하였다. 열 중량 분석(TGA)을 통해 열분해 현상을 관찰하여 전단을 가하지 않은 경우 ABS와 PC의 분해곡선이 뚜렷한 두 단계로 나타났으나, 고속 전단 가공을 한 경우 분해하는 경향이 일직선상으로 변화되어 나타났다. 이에 대한 물성변화의 원인을 조사하기 위해 주사전자현미경(SEM)으로 관찰하여 분산상의 크기 또한 감소함을 확인하였고, 만능 재료 시험기(UTM)를 이용하여 신율이 고속 전단 가공을 한 경우, 소폭 감소하다가 특정 조건 이상에서는 급격한 감소를 보임을 관찰하였다. 결론적으로 적정한 고속 전단 응력 조건 이하에서는 PC/ABS 블렌드의 유리전이온도가 수렴하고, 적정 조건 이상에서는 유리전이온도가 급감하므로 전단응력에 의해 열화되는 것을 확인하였다.

• 한국전자통신학회논문지
• /
• 제5권2호
• /
• pp.133-137
• /
• 2010

본 연구에서는 128채널 3차원 심장전기도 시스템의 영상화를 PC 기P반에서 구현하였다. 데이터를 받는 시간을 제외하더라도 실제적으로 구간을 설정하고 분석하는 시간은 1분도 걸리지 않아 짧은 시간 내에 분석해야 하는 심장 수술시 매우 유용함을 알 수 있었다. 특히 PC 기반으로 구현되었기 때문에 이동은 물론 데이터 보관이 용이하다. 또한 수술후에도 언제든지 데이터를 불러내어 분석 할 수 있으며 원하는 결과를 쉽게 확인할 수 있다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.10-13
• /
• 1996

We have developed the digital polysomnograph system to enhance the manual sleep study. This system is composed of host PC and target board. The host computer is IBM-PC Pentium 133 MHz and the target board is PC31 (processor type: TMS320C31). These two Processors communicate with each other by dualport RAM. Target board acquire 16 channel sleep signals from the Polysomnographic system (GRASS model 78, USA) and digitize them. We used high resolution monitor$(1600{\times}1280)$ to simulate the paper-recording quality of polysomnographic signal. We also implemented the GUI based polysomnographic staging program on the windows environment. Clinicians can score the sleep stage, and edit and mark the event efficiently. Finally it can support making patient database.

• 농업과학연구
• /
• 제45권3호
• /
• pp.475-484
• /
• 2018

Nitrite is an essential additive for the manufacture of cured meat products. This study was conducted to investigate the curing effect of the plasma treated juice of red Perilla in meat batter. The nitrite content in the juice of red Perilla was increased by the indirect treatment of atmospheric pressure plasma, and the lyophilized powder of red Perilla juice contained 9,133 ppm of nitrite. A meat batter without a nitrite source was prepared as a negative control (NC), and the meat batters cured with sodium nitrite (PC), celery powder (CP), and the lyophilized powder of red Perilla juice treated with atmospheric pressure plasma (PTP) at 70 ppm level of nitrite were prepared. The PTP showed the highest pH and the lowest cooking loss among the treatments. There were no significant differences in the nitrosyl-hemochrome content in the cooked meat batters of the PC, CP and PTC. However, the PTP had a lower CIE $a^*$-value compared to the PC and CP. The malondialdehyde content in the cooked meat batters was significantly lower in the CP and PTP than in the NC while there was no significant difference between the NC and PC. Based on the results of this study, the plasma treated juice of red Perilla can be used as a new natural nitrite source for cured meat products.

• Elastomers and Composites
• /
• 제23권2호
• /
• pp.125-133
• /
• 1988

The thermal degradation of polymethyl methacrylate(PMMA) blend namely polymethyl methacrylate-polycarbonate(PMMA-PC) blend and polymethyl methacrylate-polystyrene(PMMA-PS) blend were carried out by isothermal method under air at several heating temperature from 220 to $270^{\circ}C$. Molecular weight changes during the thermal decomposition were monitored by means of the viscosity average molecular weight($\bar{M}v$). The viscosity average molecular weight was determined by Gel Permeation Chromatography(GPC). The dominant process in the degradation of PMMA-PC and PMMA-PS blend were main chain scission randomly due to weak links that may be distributed along the polymer backbone and the initial rate which the bonds are broken is not sustained. The infra-red spectra of degraded PMMA-PS blend show that the presence of aromatic ketone band at $1685cm^{-1}$. However, the infra-red spectra of degraded PMMA-PC blend show that the presence of hydroperoxide band at $3450cm^{-1}$. Thus indicating that the weak links are attacked by oxygen from the air and produce hydroperoxide or ketone. The activation energies of PMMA-PC blend and PMMA-PS blend were 18.2 and 17.9 Kcal/mol, respectively.

• Natural Product Sciences
• /
• 제24권2호
• /
• pp.99-102
• /
• 2018

This study investigated the effects of ombuoside, a flavonol glycoside, on dopamine biosynthesis in PC12 cells. Ombuoside at concentrations of 1, 5, and $10{\mu}M$ increased intracellular dopamine levels at 1 - 24 h. Ombuoside (1, 5, and $10{\mu}M$) also significantly increased the phosphorylation of tyrosine hydroxylase (TH) (Ser40) and cyclic AMP-response element binding protein (CREB) (Ser133) at 0.5 - 6 h. In addition, ombuoside (1, 5, and $10{\mu}M$) combined with L-DOPA (20, 100, and $200{\mu}M$) further increased intracellular dopamine levels for 24 h compared to L-DOPA alone. These results suggest that ombuoside regulates dopamine biosynthesis by modulating TH and CREB activation in PC12 cells.

• 콘크리트학회논문집
• /
• 제26권2호
• /
• pp.125-133
• /
• 2014

이 연구에서는 볼트접합 및 프리스트레스를 적용한 프리캐스트 콘크리트 보-기둥 외부접합부의 내진 및 구조적 성능을 평가하였다. 총 5개의 보-기둥 외부접합부 실험체를 제작하고 보 단부에 변위제어 방식으로 반복하중을 가하며 실험을 수행하였다. 이 연구의 결과를 근거로 다음과 같은 결론을 얻을 수 있었다. 완전 건식공법이 적용된 PC 접합부는 완전 습식공법이 적용된 RC 접합부보다 에너지소산이나 핀칭현상에 있어서 불리한 거동을 보였지만 이는 설계과정에서 의도된 현상이며, 횡변형 능력에 있어서는 우수한 결과를 보였다. 또한 층간변위비 4%까지 횡하중 저항성능의 손실이 발생하지 않았고 매설용너트에 항복이 집중되는 메커니즘을 보이는 점으로 미루어 볼 때 개발된 접합부는 외부접합부 횡저항시스템으로서 적합한 것으로 사료된다. 추가적인 프리스트레스는 PC 접합부의 과도한 핀칭현상 방지 및 접합부 균열제어에 효과적이었으며 PC 접합부의 전체적인 내진성능을 향상시켰다.

• 한국환경과학회지
• /
• 제6권2호
• /
• pp.133-139
• /
• 1997

말로네이트 제조 공정에서 발생되는 폐액으로부터 용매추출법을 적용하여 코발트 회수 연구를 하였다 용매 추출에서의 주요 변수는 용매의 선택, pH, 코발트 농도, 역추출 온도 등이며 이러한 변수들의 영향을 조사하였다. 용매로써 DEHPA와 PC88A가 사용되었으며 이들 용매의 평형추출 곡선을 구하였다. 공장설계 조건을 찾기 위하여 Mccabe-Tiele 선도를 작성하였고, 연속 공정인 믹서-세틀러 장치를 가동하였다. 본 연구 결과 폐액 중에서 코발트는 99.9% 이상 회수되었고, 회수된 황산코발트의 순도는 99.9% 이상이었다.

• Carbon letters
• /
• 제1권3_4호
• /
• pp.133-137
• /
• 2001

Mesoporous activated carbon fiber (ACF) was prepared from phenolic resin containing a small amount (0.1 wt %) of organic nickel complex through carbonization and steam activation. Microporous ACF as reference sample was also prepared from phenolic resin without agent. In both cases of the mesoporous ACFs and the microporous ACFs, the electric double layer capacitance of the nonaqueous electrolyte (0.5 M $TEABF_4$/PC or 1.0 M $LiClO_4$/PC) was not proportional to the BET specific surface area. This is owing to the low permeability of nonaqueous electrolyte or the low mobility of ion in narrow micropores. However, the mesoporous ACF showed higher double layer capacitance than the microporous (normal) ACF. This result suggests that the presence of many mesopores promotes the formation of effective double layer or the transfer of ion in the micropore.

• 패션비즈니스
• /
• 제21권1호
• /
• pp.124-133
• /
• 2017

This study analyzed consumers' online fashion shopping site usage by site type and analyzed how product information search and product purchase differ. In addition, by comparing and analyzing preference and selection factors of PC and mobile shopping, we tried to provide basic data of effective mobile commerce operation strategy according to expansion of mobile market in fashion industry. We surveyed the use of 6 types of online sites (portal site, open market, general shopping mall, social commerce shopping mall, brand shopping mall and non-brand shopping mall) to understand the usage of mobile shopping site for consumers' fashion products. Consumer survey subjects were 373 college students in their early 20s who had the most mobile shopping experiences. The questionnaire consisted of online fashion site usage items, internet and mobile fashion shopping preference (6 items), internet and mobile shopping choice behavior (10 items), and purchase intention (3 items) .Data were analyzed using SPSS 14.0 program. The high preference of portal sites, open market, social commerce, and non-brand shopping malls in shopping online fashion products is a result of the perceptual changes of major distribution channels and the trends of consumers' value consumption tendency. Therefore, it is necessary for fashion companies to actively cope with fashion product distribution competition with huge shopping sites of current online market by well understanding consumers' preference trends and factors of online sites.