• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.266-271
• /
• 2003

The reflectance spectrum of optical films thicker than a few microns shows an intensity oscillation due to interference. Since the spectral period of the oscillation is inversely related to film thickness, the thickness of an optical film can be determined from the spectral frequency of the oscillation. For rapid data processing, the spectral frequency is obtained by use of a Fast Fourier Transformation technique. The conventional method of applying a Fast Fourier Transformation to the reflectance spectrum versus photon energy is modified so as to clear the ambiguity in choosing the proper effective refractive index value and to prevent the broadening of the Fourier transformed peak due to the refractive index dispersion. This technique of modified Fast Fourier Transformation is suggested by the authors for the first time to their knowledge. From the analysis of the calculated reflectance spectrum of a 30-${\mu}{\textrm}{m}$-thick dielectric film. it is shown to improve the accuracy in determining film thickness by a great amount. The improved accuracy of the modified Fast Fourier Transformation is also confirmed from the analysis of the reflectance spectra of a sample with 80-${\mu}{\textrm}{m}$-thick cover layer and 13-${\mu}{\textrm}{m}$-thick spacer layer on a PC substrate.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.157-165
• /
• 2015

Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

• Korean Journal of Radiology
• /
• v.23 no.5
• /
• pp.539-547
• /
• 2022

Objective: To investigate the association between functional tumor burden of peritoneal carcinomatosis (PC) derived from diffusion-weighted imaging (DWI) and overall survival in patients with advanced ovarian carcinoma (OC). Materials and Methods: This prospective study was approved by the local research ethics committee, and informed consent was obtained. Fifty patients (mean age ± standard deviation, 57 ± 12 years) with stage III-IV OC scheduled for primary or interval debulking surgery (IDS) were recruited between June 2016 and December 2021. DWI (b values: 0, 400, and 800 s/mm²) was acquired with a 16-channel phased-array torso coil. The functional PC burden on DWI was derived based on K-means clustering to discard fat, air, and normal tissue. A score similar to the surgical peritoneal cancer index was assigned to each abdominopelvic region, with additional scores assigned to the involvement of critical sites, denoted as the functional peritoneal cancer index (fPCI). The apparent diffusion coefficient (ADC) of the largest lesion was calculated. Patients were dichotomized by immediate surgical outcome into high- and low-risk groups (with and without residual disease, respectively) with subsequent survival analysis using the Kaplan-Meier curve and log-rank test. Multivariable Cox proportional hazards regression was used to evaluate the association between DWI-derived results and overall survival. Results: Fifteen (30.0%) patients underwent primary debulking surgery, and 35 (70.0%) patients received neoadjuvant chemotherapy followed by IDS. Complete tumor debulking was achieved in 32 patients. Patients with residual disease after debulking surgery had reduced overall survival (p = 0.043). The fPCI/ADC was negatively associated with overall survival when accounted for clinicopathological information with a hazard ratio of 1.254 for high fPCI/ADC (95% confidence interval, 1.007-1.560; p = 0.043). Conclusion: A high DWI-derived functional tumor burden was associated with decreased overall survival in patients with advanced OC.

• Journal of the Korean housing association
• /
• v.18 no.3
• /
• pp.63-72
• /
• 2007

The purpose of this study is to identify the impact of the building, site, and region characteristic factors on the annual average price rising rate of apartment housing in Seoul. The data were consisted of 272 apartment units in Seoul. A survey included checking the drawing documents and interview with apartment maintenance staffs and real estate agencies from October 2006 to February 2007. Data were analyzed with descriptives, frequency, crosstabs, and linear regression by SPSS/PC for Window. The linear regression model was employed to evaluate the price rising rate in apartment housing. Following results were obtained. The price rising rate for pyeong ($3.3m^2$) of apartment housing was determinated by the district zone, the construction company's brand name, the building age, the building stories, the floor space index, the building-to-land ratio, the green space rate, and the distance from the downtown. Especially, the district zone was the most important factor that affected the price rising of apartment housing in Seoul. Therefore, the policy has to focus to solve the imbalance between autonomous districts with the collaborated tax.

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.76-83
• /
• 2013

A real-time wireless monitoring and analysis methods using the wearable PPG sensor to estimate cardiovascular condition is studied for ubiquitous healthcare service. A small size and low-power consuming wearable photoplethysmogram (PPG) sensor is designed as a wrist type device and connected with the IP node assigned its own IPv6 address. The measured PPG waveform in the IP node is collected and transferred to a central server PC through the IP-enabled wireless network for storage and analysis purposes. A monitoring and analysis program is designed to process the accelerated plethysmogram (APG) waveform by applying the second order derivatives to analyze systolic waves as well as heart rate variability analysis from the measured PPG waveform. From our results, the features of cardiovascular condition from individual's PPG waveform and estimation of vascular compliance by the comparison of APG-aging index (AI) and ratio of LF/HF are demonstrated.

• Journal of Korean Academy of Nursing
• /
• v.29 no.4
• /
• pp.829-840
• /
• 1999

This study was conducted to construct a hypothetical model of depression in Korean adolescent women and validate the fit of the model to the empirical data. The data were collected from 345 high school girls in Seoul, from May 1 to June 30, 1998. The instruments were the Body Mass Index, Physical Satisfaction Scale, Family Adaptatibility and Cohesion Evaluation Scale III, Family Satisfaction Scale, CES-D and School Adptation Scale. The data were analyzed using descriptive statistics with the pc -SAS program. The Linear Structural Relationship(LISREL) modeling process was used to find the best fit model which would predict the causal relationships among the variables. The overall fit of the hypothetical model to the data was moderate ［X$^2$＝69.6(df＝17, p＝.000), GFI ＝0.95, AGFI＝0.90, RMR＝0.087, NNFI＝0.86, NFI＝0.90］. The predictable variables, especially menstrual symptoms, physical symptoms and family function, had a significant direct effect on depression. but school life adaptation did not have a significant direct effect. These variables explained 18.1% of the total variance.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.476-479
• /
• 2010

In recent years, the deterioration of infrastructures is especially considered. In prestress concrete bridges, one of the important mechanisms of deterioration is the corrosion of the post-tensioned tendon due to environmental agents. In this study, the reliability analysis is performed for a prestress concrete box girder bridge under the pitting corrosion attack with considering the inspection and failure cost. The variation of life-time performance depending on inspection methods have to be quantified. The inspection methods with different accuracy of corrosion detection are presented and applied for model of reliability analysis. The computer program for analysis reliability index of the structure as well as updating process is obtained. An existing bridge is applied for illustrating the influence of inspection cost on the behaviors of structure. Subsequently, the benefit of inspection has shown to predict the time to failure of structure.

• Journal of Nutrition and Health
• /
• v.22 no.4
• /
• pp.275-289
• /
• 1989

The purpose of this study is to develop a computer system with data file and computerized programs for nutrition counseling. In this research, a 16 / XT personal computer (word : COBOL) compatible with IBM-PC/XT was used. Computer system developed for this study was as follows: Data files(food composition list, food exchange list, nutrition management comment, special diet therapy) were used for analysis the nutritional status and the ntrition education comment. (1) Programs for the nutritional status assessment 1) General information a) Name, age, sex, higher, weight, activity, disease and special diet b) Ideal body weight and Obesity assessment(Kaup index and Broca index) c) Rest and athletics status d) Biochemical data comparision with standard 2) Food Intakes 3) Nutrient Intakes a) Comparison of the amounts intaked with the recommended dietary allowances for present weight. b) Comparison of the energy composition rate intaked with the recommended dietary allowances for present weight. b) Comparison of the energy composition rate intaked with the recommended for present weight and ideal weight. c) Nutrient analysis by each meal and snack. 4) Food intakes from each food group and comparison with recommended 5) Special nutrient analysis. (2) Programs for the nutrition education based on nutritional status assessment. 1) Suggestion of number of food exchange group 2) Nutritional assessment and advise comments 3) Nutritional management comments 4) Special diet therapy In the study, the nutritioal status and nutrition education comments are based on individual data from nutrition counseling.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1287-1295
• /
• 2015

This research is the study on the comparative evaluation of SPC (Staggered Pedestrian Crossings) vs PC (Pedestrian Crossings) using risk analysis. Accident factor was elicited by survey of driver's and pedestrian's at SPC & PC. I estimated the weight of a risk of violation and a mental burden by AHP (Analytic Hierarchy Process) and compared degree of risk at SPC AND PC. In conclusion, a new alternative plan of a pedestrian crossing system, staggered pedestrian crossing which plays an important role in traffic flow, pedestrian's crossings which plats an important role in traffic flow, pedestrian's convenience and traffic safer is sager than pedestrian crossings the degree of risk used this study doesn't imply an measure of the number of accident and the rate of accident, in estimating the degree of risk of pedestrian crossings, we should analyze more data of accident, behaviors, and road circumstance to include driver's and pedestrian's violation behavior in an estimate index.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.1-6
• /
• 2013

This study was conducted to investigate the variation of fruit and seed morphology among populations and among individuals within population of Sorbus commixta Hedl. distributed in Korea. Fruits collected from 42 trees in six natural populations and their six fruit and four seed characteristics were analyzed. In all characteristics, there were significant differences among populations and among individuals within populations. Especially, number of fruits per fruit-bearing branch and number of seeds per fruit showed higher values among populations in total variance component. Coefficients of variation in the number of fruits per fruit-bearing branch and seed weight are relatively high (42.0~75.3%) compared to other traits (11.9~32.1%). As a result of simple correlation analysis, the number of fruits per fruit-bearing branch showed a significant positive correlation with latitude but showed a negative correlation with longitude. According to cluster analysis, geographically close populations showed the tendency of clustering into the same group. Three principal components (PC) were deduced from principal component analysis, which explain the 87% of total variance of fruit and seed characteristics. The highest contribution was seed length and seed weight in PC1, fruit width and seed index in PC2 and fruit length and number of fruits per fruit-bearing branch in PC3.