• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.90-97
• /
• 2005

일반적으로 DAB 시스템은 크게 stand-alone 방식과 PC/PDA 기반 방식으로 구분할 수 있다. PC/PDA 기반 방식은 stand-alone 방식에 비하여 휴대성이 떨어지나 연결된 PC/PDA의 메모리와 오디오/비디오 디코더 등 다양한 리소스를 이용할 수 있는 장점이 있다. 본 논문에서 구현한 DAB 수신기는 USB 인터페이스를 이용한 PC 기반의 수신기 시스템으로 USB 인터페이스 브리지는 FPGA와 EZ-USB 개발 키트를 이용하여 설계하였으며 실험을 위하여 기존의 stand-alone 방식의 DRK-026 DAB 수신기를 이용하여 PC 기반의 수신기를 구현하였다. USB 인터페이스 브리지는 시리얼 데이터를 USB 패킷 형태로 변환시켜주며 모든 신호는 하드웨어적으로 제어한다. 구현한 PC 기반 DAB 수신기의 동작 여부는 DAB 수신기로부터 오디오 데이터를 수신하여 USB 인터페이스를 통하여 PC에 전송한 후 디코딩 기능을 수행하는 것으로 확인하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (1)
• /
• pp.574-576
• /
• 2005

정보통신 기기의 발전하면서 소형화, 경량화와 함께 이동성을 갖춘 다양한 차세대 PC 기기들이 나타나고 있다. 기존의 마우스나 키보드를 통한 인터페이스뿐만 아니라 음성, 펜, 제스처 등을 이용한 멀티모달 인터페이스에 대한 요구가 증대되면서 이에 대한 연구가 활발히 이루어지고 있다. 또한 최근의 음성 처리 기술이 발전하고 단말기의 성능이 개선되면서 음성을 이용한 인터페이스에 대한 연구가 활발히 이루어지고 있다. 본 논문에서는 브라우저에서 음성 지원을 위해 제안된 SALT를 기반으로 하여 사용자와 음성 인터페이스가 가능한 음성 브라우저를 설계하고 구현한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.513-518
• /
• 1998

In Half Precast Concrete Method, such as composite slab and composite wall, Interface between half PC plate and cast-in-place concrete is occurred. And this interface endure lastly in-plane shear which is occurred by external force. Therefore, test was executed to study in-plane shear strength of interface between half PC plate and cast-in-place concrete. In this test, Experimental parameters are finishing condition of the interface, cohesion of concrete, existence and nonexistence of re-bar truss, and angle and direction of lattice of re-bar truss. Comparing and analyzing experimental results, conclusions are obtained as follows. (1) In-plane shear strength of wide interface in composite plate is more affected by the roughness of interface than re-bar truss. And cohesion of concrete contribute to increasing in-plane shear strength. Therefore it seems that the interface should be roughen and kept clean to improve in-plane shear strength. (2) It seems that shear friction equation in ACI code can be sagely available for design of in-plane shear of composite plate.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.350-356
• /
• 2005

We report the space charge and the surface potential of the interface between metal and copper(Ⅱ)-phthalocyanine(CuPc) thin films by measuring the microwave reflection coefficients S/sub 11/ of thin films using a near-field scanning microwave microscope(NSMM). CuPc thin films were prepared on Au and Al thin films using a thermal evaporation method. Two kinds of CuPc thin films were prepared by different substrate heating conditions; one was deposited on preheated substrate at 150。C and the other was annealed after deposition. The microwave reflection coefficients S/sub 11/ of CuPc thin films were changed by the dependence on grain alignment due to heat treatment conditions and depended on thickness of CuPc thin films. Electrical conductivity of interface between metal and organic CuPc was changed by the space charge of the interface. By comparing reflection coefficient S/sub 11/ we observed the electrical conductivity changes of CuPc thin films by the changes of surface potential and space charge at the interface.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.351-356
• /
• 2014

The electronic structure at organic-organic interface gives essential information on device performance such as charge transport and mobility. Especially, the molecular orientation of organic material can affect the electronic structure at interface and ultimately the device performance in organic photovoltaics. The molecular orientation is examined by the change in ionization potential (IP) for metal phthalocyanines (MPc, M=Zn, Cu)/fullerene ($C_{60}$) interfaces on ITO by adding the CuI templating layer through ultraviolet photoelectron spectroscopy measurement. On CuPc/$C_{60}$ bilayer, the addition of CuI templating layer represents the noticeable change in IP, while it hardly affects the electronic structure of ZnPc/$C_{60}$ bilayer. The CuPc molecules on CuI represent relatively lying down orientation with intermolecular ${\pi}-{\pi}$ overlap being aligned in vertical direction. Consequently, in organic photovoltaics consisting of CuPc and $C_{60}$ as donor and acceptor, respectively, the carrier transport along the direction is enhanced by the insertion of CuI templaing layer. In addition, optical absorption in CuPc molecules is increased due to aligned transition matrix elements. Overall the lying down orientation of CuPc on CuI will improve photovoltaic efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.526-530
• /
• 2004

We report the space charge and the surface potential of the interface between metal and CuPc according to isotropic property and different metal by measuring the microwave reflection coefficients $S_{11}$ of copper(II)-phthalocyanine(CuPc) thin films by using a near-field microwave microscope(NSMM) in order to understand. CuPc thin films were prepared on gold and aluminium substrates using a thermal evaporation method. Two kinds of CuPc thin films were prepared. One was deposited on preheated substrate at $150^{\circ}C$ and the other was annealed after deposition by using thermal evaporation methods. The microwave reflection coefficients $S_{11}$ of CuPc thin films were changed by the dependence on the heat treatment conditions. By comparing reflection coefficient $S_{11}$ we measured electrical conductivity of CuPc thin films and studied this results with respect to the surface potential and space charge of the interface between metal and CuPc thin films.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.270-281
• /
• 2022

Based on the transfer-matrix method (TMM), we report the characteristics of the interface states in one-dimensional (1D) composite structures consisting of two photonic crystals (PCs) composed of binary dielectrics A and B, with unit-cell configurations ABA (PC I) and BAB (PC II). The dependence of the interface states on the number of unit cells N and the boundary factor x are displayed. It is verified that the interface states are independent of N when the PC has inversion symmetry (x = 0.5). Besides, the composite structures support the formation of interface states independent of the PC symmetry, except that the positions of the interface states will be varied within the photonic band gaps. Moreover, the robustness of the interface states against nonuniformities is investigated by adding Gaussian noise to the layer thickness. In the case of inversion symmetry (x = 0.5) the most robust interface states are achieved, while for the other cases (x ≠ 0.5) interface states decay linearly with position inside the band gap. This work could shed light on the development of robust photonic devices.

• 디자인학연구
• /
• 제16권2호
• /
• pp.301-310
• /
• 2003

The interface design of mobile products has become a hot issue recently as a variety of products are being developed for extended usages. There have been two different views on interface design of mobile products like PDAs(personal digital assistants) or cellular phone. One 치aims that the current interface design of PC cannot be directly applied because mobile products have their own specific functions and requirements. On the meantime, the other argues that an extended application of PC metaphors to mobile products can have advantages because users'PC experiences can reduce the learning efforts and thus contribute to intuitive understanding mobile products. In this research, two types of PDAs, developed according to the aforementioned conflicting philosophies were compared and evaluated, based on laboratory-based usability testing conducted by novice users. The experiment consists of asking subjects to perform identical tasks for the two different types of products. The interaction data collected during usability testing were analyzed in terms of time taken, rate of success of tasks and errors. The experiment shows that there were some meaningful effects of users'experience of PC on the usability of PDAs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1821-1823
• /
• 2006

This paper presents a development of interface device for electro-oculogram(EOG) signal and it's application to the wireless mouse of wearable PC. The interface device is composed of five bio-electrodes for detecting oculomotor motion, several band-pass filters, instrumentation amplifier and a microprocessor. we have first analyzed impedance characteristics between skin and a bio-electrode. since the impedance highly depends on human face, it's magnitude differs from person. this interface device was applied to develop a wireless mouse for wearable PC, as a Bio Machine Interface(BMI). Where in the prompt on PC monitor is controlled by only EOG signals. this system was implemented in a Head Mount Display(HMD) unit. experimental results show the accuracy of above 90%.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.652-663
• /
• 1996

본 논문에서는 PC통신망에서의 호손률을 분석하였다. PC통신망에서 전화망으로부터 발생한 호는 먼저 패킷교환망과 전화망을 연결해 주는 통신처리장치로 접속을 요구한다. 이어서 이 단계로 패킷교환망에 접속되어 있는 특정 데이타베이스로 다음의 패킷호가 요구된다. 호손률의 분석은 이상에서 두 접속링크, 통신처리장치의 전화망접속포트와 데이타베이스의 패킷교환망 접속링크에서 이루어졌다. 또한 수치결과를 통하여 시스템 변수가 망의 성능에 미치는 영향으르 살펴보았으며 각 접속점의 용량이 다른 접속저의 성능에 미치는 영향을 볼 수 있었다.