• Title/Summary/Keyword: PC공사

Search Result 111, Processing Time 0.03 seconds

Influence of Snow Accumulation and Snowmelt Using NWS-PC Model in Rainfall-runoff Simulation (NWS-PC 모형을 이용한 강우-유출 모의에서 적설 및 융설 영향)

  • Kang, Shin Uk;Rieu, Seung Yup
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.1B
    • /
    • pp.1-9
    • /
    • 2008
  • The impact of snow accumulation and snowmelt in rainfall-runoff modelling was analyzed for the Soyanggang dam basin by comparing the measured and simulated discharges simulated by the NWS-PC model. Sugawara's conceptual model was used to simulate the snow accumulation and snowmelt phenomena and NWS-PC model was employed to simulate rainfall-runoff. Parameters in model calibration were estimated by the Multi-step Automated Calibration Scheme and optimized using SCE-UA algorithm in each step. The results of the model calibration and verification show that the model considering snowmelt process is better than the one without consideration of snowmelt under the performance criteria such as RMSE, PBIAS, NSE, and PME. The measured discharge time series has over 60 days of persistence. Correlograms for each simulation showed that the simulated discharge with snowmelt model reproduce the persistence closely to the measured discharge's while the one without snow accumulation and snowmelt model reproduce only 20 days of persistence. The study result indicates that the inclusion of snow accumulation and snowmelt model is important for the accurate simulation of rainfall-runoff phenomena in the Soyanggang dam basin.

NEC5200/05에서 개발된 구조해석 및 설계자동화 프로그램

  • 정시현;김일곤
    • Computational Structural Engineering
    • /
    • v.3 no.1
    • /
    • pp.15-16
    • /
    • 1990
  • 한국건설기술연구원 구조연구실에서는 한국전력공사 토건연구실과 공동으로 N5200기종을 이용하여 철근콘크리트로 된 건축라멘구조의 해석 및 설계를 일관작업으로 시행할 수 있는 프로그램 KARST.1을 개발하였다. 본래 OA(Office Automation)용으로 개발된 N5200 기종은 현재 많은 분야에 보급, 사용되고 있는 IBM PC호환기종 보다 그 보급대수는 적지만 국내 여러기관에서 사용되고 있으며 계속적인 기계 성능의 향상과 다양한 Utility를 제공함으로써 적용분야를 증가시킬 수 있으리라 본다. 그러나 과학기술용으로 적용하기에는 아직 불편한 점이 많아 이 기종을 사용하여 구조물해석, 설계용으로 프로그램을 개발할 때 발생된 문제점과 KARST.1의 기능 및 특징을 간단히 소개하겠다.

  • PDF

The Properties of Strength and Durability of Concrete Using Early-Strength Poly Carbonic Acid Admixture (폴리카르본산계 조강혼화제 혼합 콘크리트의 강도 및 내구 특성)

  • Lee, Sang-Ho;Hong, Kyung-Sun;Moon, Han-Young
    • Journal of the Korea Concrete Institute
    • /
    • v.19 no.2
    • /
    • pp.217-224
    • /
    • 2007
  • This study reports the properties of high early strength & durability of concrete using PC admixture. To apply these data to construction site, we did the lab tests. The target of this study is to accomplish early strength of concrete (5.0 Mpa/18 hr), and we did the durability tests such as length change test, chloride ion penetration test, fleeting and thawing test, adiabatic test, etc. And we tested the porperties of concrete by the different factors, such as the type of admixtures, curing temperature, the amount of binder, etc. Through the test of concrete using the different type of admixture, PC type was more excellent than PNS type admixture. As a result, we made a concrete of high early strength concrete, and excellent durable concrete. According to these tests, we concluded that we can apply this type of PC admixture to the civil & construction site, and we can reduce the term of works and finally we will accomplish the economical construction.

Development of Mobile Application for Cadastre Information Service (지적정보 서비스 모바일 애플리케이션 개발)

  • Lee, Geun-Sang;Kim, Hyoung-Jun
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.15 no.4
    • /
    • pp.55-64
    • /
    • 2012
  • This study developed a mobile application system for serving cadastral information needed to propel diverse cadastral works including cadastral resurvey efficiently. First, BlackPoint-Xr was selected as a spatial client engine to embody the cadastral information system based on mobile device including smart phone and tablet PC. The mobile cadastral information system contains functions such as finding location with GPS based on spatial information such as aerial photo, cadastral map, administrative map, and digital map, parcel search with address and lot number, finding land register including land address, the classification of land, and land price. Especially, this study developed functions which can analyze the measurement of distance, area, slope and cross-section elevation of land to apply construction work and land maintenance project. This system can support efficiently cadastral work and construction project by serving diverse cadastral information to users in field and can be also applied to the field of digital cadastral information.

A case study on perforation under Daejeon station building by Front-Jacking method (Front-Jacking공법에 의한 대전역사 하부 관통사례)

  • Kim, Yong-Il;Hwang, Nak-Yeon;Jeong, Du-Seok;Cha, Jong-Hwi;Lee, Nae-Yong
    • Proceedings of the Korean Society for Rock Mechanics Conference
    • /
    • 2006.03a
    • /
    • pp.195-203
    • /
    • 2006
  • The crossing construction under railroad have two methods which are cut and cover and trenchless method. first, cut and cover method is an extremely limited method concerning non-running time. Whereas, trenchless method is free from restriction such as train speed and running time, and has the strong points of safe and rapid construction. Front Jacking method, one of the trenchless methods, is frequently applied recently due to its stability during construction and vantage of assuring schedule reliability. The procedure is that after minimizing interlocking friction with structure and earth pressure due to jacking the small steel tube, pulling the precast box manufactured at the field in the ground using PC strand and hydraulic Jack. This method is able to be applied regardless of section size and length of box and condition of ground. And that is also pro-environmental. This paper presents the case of Daejeon E. W. perforate Road Project applied with the Front Jacking method.

  • PDF

Adoption of Wireless Near Field Communication Method in the Discharge Measurements using Microwave Water Surface Current Meter (전자파표면유속계를 이용한 유량측정시 근거리 통신의 적용)

  • Kim, Young-Sung;Yang, Jae-Rheen
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.1784-1788
    • /
    • 2008
  • 전자파표면유속계는 여러 측정지점을 가능한 신속하게 이동하면서 홍수시 유속을 측정하는데 그 목적이 있다. 또한 홍수시 유속은 시간대 별로 급격히 변하는 속성을 가지고 있으므로 유량측정 지점의 유량을 실시간으로 획득하기 위해서는 현장 측정에서 측정한 유량데이터가 실시간으로 집계 되어야한다. 현재의 시스템은 측정 정보를 실시간으로 전송하기 위하여 현장 측정자에게 PDA가 보급되어 있으며 CDMA망을 통해서 유량 측정을 위한 각종 정보 및 측정결과를 실시간 전송하도록 되어있다. 그러나 전자파표면유속계를 비롯한 각종 유속계가 PDA와 무선으로 통신을 할 수 있게 되어있지 않기 때문에 열악한 여건의 현장에서 측정한 데이터를 야장에 수기로 기록한 후 이를 다시 PDA에 수동으로 입력시켜야하는 불편함이 있다. 전자파표면 유속계를 제외한 다른 측정 장비는 제조회사가 수자원공사와 독립적인 업체이므로 통신 접속을 하기위한 특정 인터페이스를 알아내기가 어려운 실정이다. 그러나 전자파표면유속계는 수자원공사에서 개발한 장비로서 핵심기술을 수자원공사에서 보유하고 있으므로 PDA와 통신을 가능하게 하는 장치의 개발이 가능하다. 이에 이러한 불편한 문제점을 개선하여 현장에서 홍수 유량 측정시 작업자들의 편이성을 증대시키고자 전자파표면유속계와 PDA간에 근거리통신기법을 적용하였다. 이를 위하여 Bluetooth, UWB(Ultra-Wide Band, 초광대역통신), Zigbee 등 적용가능한 근거리 통신기법을 조사하였다. 그 결과 Zigbee가 소비전력이 적어 현장에서 홍수유량측정에 이용되는 전자파표면유속계에 적용성이 가장 뛰어난 것으로 나타났다. 무선통신 모듈과 연동되는 전자파표면유속계는 이동식을 기준으로 적용하였으며 기존 신호처리부에 무선통신 모듈을 장착할 수 있는 구조로 설계하였다. 장착 방식은 기존 이동식 유속계의 신호처리부의 RS-232 포트에 무선통신 모듈을 장착하면 사용할 수 있는 구조로 되어있다. 신호처리부 RS-232 포트는 현재까지는 측정한 유속값을 PC로 전송받는 용도로 활용되었으나 무선모듈 장착 시에는 무선통신 할 수 있는 이중화 구조를 채택하였다. 두 가지 방식에 대한 통신구별은 초기에 송수신하는 데이터에 따라 구별되도록 하였다. 신호처리부에서 무선통신 추가에 따른 운용 방식은 별도의 수자원공사 모드를 추가하여 운용하도록 수정하였다. 유속 측정 시에는 무선통신 모듈을 제거한 상태에서 측정한 후, 측정한 데이터를 PDA로 전송할 때 아를 부착하여 사용할 수 있는 구조를 갖도록 제작하였다. 이러한 방식을 적용시킨 이유는 기존에 보급된 유속계에 무선모듈을 장착한 후, 신호처리부 운용 프로그램을 업그레이드하면 바로 사용할 수 있도록 하기 위함이다.

  • PDF

Development of a Simulation Model for Supply Chain Management of Precast Concrete (프리캐스트 콘크리트 공급사슬 관리를 위한 시뮬레이션 모형 개발)

  • Kwon, Hyeonju;Jeon, Sangwon;Lee, Jaeil;Jeong, Keunchae
    • Korean Journal of Construction Engineering and Management
    • /
    • v.22 no.5
    • /
    • pp.86-98
    • /
    • 2021
  • In this study, we developed a simulation model for supply chain management of Precast Concrete (PC) based construction. To this end, information on the Factory Production/Site Construction system was collected through literature review and field research, and based on this information, a simulation model was defined by describing the supply chain, entities, resources, and processes. Next, using the Arena simulation software, a simulation model for the PC supply chain was developed by setting model frameworks, data modules, flowchart modules, and animation modules. Finally, verification and validation were performed using five review methodologies such as model check, animation check, extreme value test, average value test, and actual case test to the developed model. As a result, it was found that the model adequately represented the flows and characteristics of the PC supply chain without any logical errors and provided accurate performance evaluation values for the target supply chains. It is expected that the proposed simulation model will faithfully play a role as a performance evaluation platform in the future for developing management techniques in order to optimally operate the PC supply chain.

Fabrication and Constructability of a General-Purpose Manufactured Precast Concrete Double Wall (범용 생산설비를 활용한 PC 더블월 제작 및 시공성에 관한 연구)

  • Park, Soon-Jeon
    • Journal of the Korea Institute of Building Construction
    • /
    • v.23 no.4
    • /
    • pp.465-476
    • /
    • 2023
  • This study introduces the development of a precast concrete double-wall, applicable to basement construction in apartment buildings. Unlike traditional precast concrete double walls, the developed double-wall doesn't require specialized manufacturing equipment such as a lathe. The constructability of these advanced technologies was validated through a full-scale mock-up test using the precast concrete double wall. The test specimens were constructed to represent a structural wall with a thickness of 250mm. It was observed that the quality of the in-situ concrete, filled between two single panels of 110mm thickness each, was excellent. The construction efficiency of the developed double-wall system for basement construction in an apartment building was also examined. Expert interviews about installation times of precast concrete elements were conducted to evaluate the speed of the basement floor's installation. The results showed that installation of precast concrete elements, including the proposed double walls, could be completed within 20 to 29 days for a basement in an apartment building. This indicates a three-fold increase in construction efficiency compared to traditional methods relying on in-situ casting.

A study on the development of a web-based cost management system of building interior projects (웹을 기반으로 한 실내건축공사의 원가관리 시스템 개발에 관한 연구)

  • 송영규
    • Korean Institute of Interior Design Journal
    • /
    • v.13 no.3
    • /
    • pp.197-204
    • /
    • 2004
  • This study aims at the development of a cost management system in building interior projects. Renovation and remodeling is activated and expanded much more being compared with new building construction at present. After Interior project proceeding must get out of simple estimate and assumption, then its be needed a formal work process and computerized cost management. Proceeding a building interior project management was proceed in the office and the field. Cost break down, especially, depend on the field manger and used fiend managing money because its not checked by cost manager in office manger. For this study, cost factors are defined in terms of cost break-down interior works which consist of materials and labors. A data model for cost factors was developed, and a relational database is used to realize cost data management based upon this data model. Data input and output are achieved by internet from both of wired PC and mobile phone. This system can timely display a number of needed reports for cost management that identifies cash flow and predicts budget for cost break-down works in interior projects.

New Patent Technology for Retaining Wall and Bridge Abutment (옹벽 및 교대 신기술 특허)

  • Kim, Kyeong-Ho;Choi, Jung-Ho;An, Jung-Seng;Kim, Nak-Gyeom
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.895-898
    • /
    • 2008
  • This research paper intends to investigate and review the new technology of patent registration trend for the most recent domestic retaining wall and bridge abutment, and to apply the technology appropriately to the actual retaining wall and bridge abutment construction. Investigated new technological patents for retaining wall include pre-fabricated PC retaining wall construction method that reduces section force with prestressed PS steel bars, pre-fabricated Coupler-Tension retaining wall, clay reinforced retaining wall block for road, earth reinforced retaining wall block that induces uniform settlement, and etc. Investigated new technologies for abutment are abutment construction method that uses sheet pile, monolithic bridge with complex abutments, construction method for abutment bridge, earth reinforced abutment structure and etc.

  • PDF