• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.108-109
• /
• 2009

In this study we investigated the characteristics of GZOB thin film on $O_2$ plasma treated Polycarbonate substrate using DC magnetron sputtering method. In our experiments results, GZOB thin film on $O_2$ plasma treated Polycarbonate substrate showed low resistivity than As-grown GZOB thin film, and visible transmission of 85% with a thickness 400 nm. Compared with As-Grown the electrical properties of GZOB were relatively improved by $O_2$ plasma treated substrate. From these results, we could confirm the suitable GZOB thin films for transparent electrode.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.42-49
• /
• 2009

The optical elements made of plastics are normally produced by mass production such as injection molding with use of precision dies and molds. It costs to prepare the dies and molds, and it is only justified to prepare such expensive dies and molds when the parts are massively produced. On the other hand, it is too expensive and inefficient when precision plastic parts are needed only in small quantities, such as a case of trial manufacturing of new products. An ultra-precision diamond cutting is one of promising processes to produce the precision plastic parts in such cases. But it is commonly believed that an ultra-precision cutting of plastics for optical components is very difficult, because they are thermo-plastic material. In the present research, an ultra-precision diamond cutting of polycarbonate (PC), that is one of typical optical materials, was tried by using elliptical vibration cutting method. It is experimentally proved that good optical surfaces were obtained by using elliptical vibration cutting in cases of grooving and flat surfaces. The maximum surface roughness of less than 60 nm in peak to valley value is acquired.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.213-213
• /
• 2006

High molecular weight of polycarbonate(PC) and well dispersed PC/MMT nanocomposites were successfully prepared through the novel technology, microwave solid-state polymerization. In our studies, the microwave irradiation is more effective than conventional oil-bath heating on achieving the high molecular weight and uniform nanocomposites. Using the polycarbonate prepolymer made it possible to intercalate the short chains into the galleries of MMT more easily. And it was observed that prepared nanocomposites by microwave solid-state polymerization have more uniform dispersion of silicate of MMT into the polymer matrix than by oil heating.

• 한국진공학회지
• /
• 제6권1호
• /
• pp.44-49
• /
• 1997

반응성 RF 스퍼터링 장치에 반응성 질소와 작업가스 아르곤을 동시에 주입하면서 Al을 스퍼터링하여 AIN박막을 형성하였다. polycarbonate기판이나 이 디스크 표면 위의 micron크기의 pregroove형태의 손상이 일어나지 않을 정도의 저온의 저온을 유지키 위하여 플라즈마(plasma) 자체 온도($100^{\circ}C$이하)로 가열하면서 silicon과 glass기판 위에 AIN박막을 증착시켰다. 여러 증착변수 변화에 따른 박막의 결정성, 단면형상 및 굴절율 변화 등을 분석 하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.169-170
• /
• 2003

There was little development in transparent conductive polymer films and their limited studies have been mainly focused on polymer films coated by water-soluble PEDOT doped with the polymeric counteranion poly(4-styrenesulfonate) (PEDOT-PSS)[1-3]. However PEDOT-PSS as coating material has some difficulties because of high viscosity and low solubility in organic solvent except for in water. In this study, in order to extend practical applications of PEDOT and to prepare conductive PC films, we tried to prepare PEDOT-coated PC films and investigated their conductivity and thermal stability. (omitted)

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1285-1288
• /
• 2007

Au was electrolessly deposited on polycarbonate (PC) membranes (0.1 μm pores) at the air/water interface. It was found that the Au nanotube dimension can be controlled by adjusting the plating temperature and the solution composition. Interfacial deposition of Au at relatively low temperatures (4℃) produced long nanotubes, which run through the whole membrane thickness with small openings. Increase of plating temperatures resulted in the decrease of nanotube lengths and Au film thicknesses. It was also disclosed that the inside-diameter of Au nanotubes can be controlled with negligible variations in length by changing the composition of a plating solution.

• 반도체디스플레이기술학회지
• /
• 제3권4호
• /
• pp.5-11
• /
• 2004

Optical properties of PET(Polyethylene terephthalate), PC(Polycarbonate), Acrylic resin and PE(Polyethylene) sheets were studied as a function of heat treating temperature of $60^{\circ}C$ to $150^{\circ}C$. By the heat treatment, optical properties of transmittance, absorbance, and reflectance showed a considerable change with different ways according to the materials. To understand the reason of optical property change, X-ray diffraction and surface morphology were also investigated. It was observed that small crystallite and pore that can cause scattering largely affect the transmittance. It was suggested that change of surface chemical bond induce the reflectance variation.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.159-164
• /
• 2007

Transparent aluminum oxide films were deposited on polycarbonate (PC) substrates by inductively coupled plasma (ICP) assisted reactive sputtering. the oxygen flow rate was regulated by controlling the target voltage with a proportional integrate derivative controller. The PC substrate was treated with plasma prior to the deposition in order to the enhance the adhesive strength of the $Al_2O_3$ film. The characteristics of hardness, structure, density, transmittance, deposition rate, surface roughness and residual stress were investigated to estimate the possibility for the hard coating.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제25회 학술발표회 초록집
• /
• pp.100-100
• /
• 2003

• 공업화학
• /
• 제26권3호
• /
• pp.336-340
• /
• 2015

단량체로 디페닐카보네이트를 이용한 세 종류의 폴리카보네이트(PC)/그래핀 옥사이드(GO) 복합체, 즉 이축압출기를 이용한 PC/GO 복합체(PC/GO), 촉매를 이용한 in-situ PC/GO 복합체(PC/GO-cat.), 그리고 -COCl로 표면 처리된 GO-COCl을 이용한 in-situ PC/GO 복합체(PC/GO-COCl)를 용융중합을 통해 제조하였다. PC/GO 복합체의 합성은 $3000cm^{-1}$와 $1750cm^{-1}$ 근처에서 나타나는 C-H 그리고 C=O 신축진동 피크를 통해 확인하였다. DSC와 TGA 분석 결과에 따르면, PC/GO와 PC/GO-cat.과 비교할 때, PC/GO-COCl의 유리전이온도가 상대적으로 낮은 값을 나타내었고, PC/GO 복합체의 열안정성이 가장 우세함을 나타내었다. 저장탄성률(G')-손실탄성률(G") 그래프의 기울기는 고분자 용융체의 비균질성의 증가와 함께 감소하는 경향이 있어, GO 분산성을 확인하는데 사용될 수 있다. G'-G" 기울기 결과로부터 PC/GO와 PC/GO-cat. 복합체의 PC 매트릭스 내 GO 분산성이 양호함을 알 수 있고, 이는 원자력현미경 사진을 통해 재확인하였다. PC/GO-COCl의 경우 분산성이 열세한 이유 중 하나는 중합과정에서 -COCl에 의해 분지구조나 가교구조 등이 발생하여 GO의 분산을 방해하기 때문으로 해석할 수 있고, 이는 복합탄성률과 위상차(${\delta}$) 그래프로부터 확인할 수 있었다.