• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.545-555
• /
• 2000

Surface defects in injection molded parts due to the unsteady flow are related to the dimension of gate, operational conditions and rheological properties of polymer. In this study we have examined surface defects in injection molding for PC, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes that are tensile, flexural and impact test specimens with various gate and cavity thicknesses. Through this study we have observed that the formation of surface defect associated with jetting during filling stage in injection molding is strongly related to not on]v die swell but retardation of die swell. Large die swell eliminates jetting however the large retardation of die swell stimulates jetting. Reducing the thickness ratio of cavity to gate can reduce or eliminate jetting and surface defects. It also enlarges process window that can produce steady flow of polymer melt in injection molding.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.367-373
• /
• 2016

Many of plastic powders handled in industry are combustible and have the hazard of dust fire and explosion accidents. However poor information about the safe handling has been presented in the production works. The aim of this research is investigated experimentally on explosive characteristics of various plastic powders used in industry and to provide additional data with safety informations. The explosibility parameters investigated using standard dust explosibility test equipment of Siwek 20-L explosion chamber. As the results, the dust explosion index ($K_{st}$) of ABS ($209.8{\mu}m$), PE ($81.8{\mu}m$), PBT ($21.3{\mu}m$), MBS ($26.7{\mu}m$) and PMMA ($14.3{\mu}m$) are 62.4, 59.4, 70.3, 303 and 203.6[$bar{\cdot}m/s$], respectively. And flame propagation velocity during plastic dust explosions for prediction of explosive damage was estimated using a flame propagation model based on the time to peak pressure and flame arrival time in dust explosion pressure assuming the constant burning velocity.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.256-261
• /
• 2011

Recently a limited section of trackbed with ballast at KTX railway were reported to have settled down and led to problems such as reduced speed and passenger discomfort. Therefore, an urgent remedy for the settled trackbed is required to recover normal operation of KTX trains. In this paper, a new technique is proposed to visualize the elastic modulus of cross sections at railway trackbeds under ballast for practical identification of potential settlement. The proposed technique is based on ICSW technique, enabling use of impact source and overcoming inherent limitations of CSW method. To verify validity and feasibility of the proposed method, the method was employed to construct cross-sectional images of elastic modulus of two railway trackbeds and compared with other tests such as SASW, PBT, DCP and portable FWD tests.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.8
• /
• pp.29-40
• /
• 2017

In this study, the dynamic compaction method was selected by analyzing field situation, soil condition data and compaction test characteristics of the special selected soils, and the compaction method for using the selected soils as the site restoration soil of the ${\bigcirc}{\bigcirc}$ city non-sanitary landfill maintenance project. The N value in the standard penetration test (SPT) before and after dynamic compaction increased by an average of 89% over the range 12~18, and the allowable bearing capacity of the plate bearing test (PBT) was ranged $150{\sim}227kN/m^2$, at least 80% higher than that before test. As a result, it can be seen that the same tendency as the dynamic compaction effect applied to the existing dredging and waste landfill is shown.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.295-302
• /
• 2003

The amount of shrinkage of injection molded parts is different from operational conditions of injection molding such as injection temperature, injection pressure and mold temperature, and mold design such as gate size. It also varies depending on the presence of crystalline structure in resins. In this study, part shrinkage was investigated for various operational conditions and resins. Poly(butylene terephthalate) (PBT) for crystalline polymer, and polycarbonate (PC) and poly(methyl methacrylate) (PMMA) for amorphous polymers were used. Crystall me polymer showed higher part shrinkage by about three times than that of amorphous polymers. Part shrinkage increased as melt and molt temperatures increased, and injection pressure decreased. Part shrinkage decreased as gate size increased since the pressure delivery is mush easier for larger gate sizes. Part shrinkage at the position close to the gate was larger than that or the position far from gate. This phenomenon might be occur by difference of residual stress.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.1
• /
• pp.147-155
• /
• 2003

The diffusion of internet infrastructure and a fast increase of Population to use it is becoming a base of the service that can use various information, data and digital contents which were provided through off-line physically and used. Recently, the. techniques for copy deterrence and copyright protection have been important in e-commerce because various contents in digital form can be duplicated easily. The Access Control(AC) technique that only a user having the qualifications can access and use contents normally has been studied. The Conditional Access System(CAS) used in a satellite broadcasting md Digital Right Management System(DRMS) used for contents service are representative models of current commercialized access control. The CAS and DRM can be considered as an access control technique based on the payment based type(PBT). This paper describe the access control method of payment free type(PFT) suggested in ［5］ which are independent on the payment structure. And then we suggest a new access control method of payment free type which is more efficient than the previous one.

• Journal of The Korean Association For Science Education
• /
• v.43 no.1
• /
• pp.17-28
• /
• 2023

In line with the entry into the digital-based intelligent information society, the science curriculum emphasizes the cultivation of scientific competencies, and computer-based test (CBT) is drawing attention for assessment of competencies. CBT has advantages to develop items that have high fidelity, and to establish a feedback system by accumulating results into the database. However, it is necessary to solve the problems of improving validity of assessment results, lowering measurement efficiency, and increasing management factors. To examine students' responses to the introduction of the new assessment tools in the process of transitioning from paper-based test (PBT) to CBT, in this study, we analyzed the results of the PBT and the CBT conducted in 2021 National Assessment of Educational Achievement (NAEA). In particular, we sought to find the effects on student achievement when only the mode of assessment was changed without change of items, and the effect on student achievement when the items were composed including technology enhanced features that take advantage of CBT. This study is derived through the analysis of the results of 7,137 third-grade middle school students taking one among the three kinds of assessments, which were the PBT or two kinds of CBT. After the assessment, the percentage of correct answers and the item discriminations were collected for each group, and expert opinions on characteristics of response were collected through the expert council involving 8 science teachers with experience in NAEA. According to the results, there was no significant difference between students' achievement results in the PBT and the CBT-M, which means simple mode conversion type of CBT, so it could be explained that the mode effect did not appear. However, it was confirmed that the percentage of correct answers for the construct response items was somewhat high in the CBT, and this result was analyzed to be related to the convenience of the response. On the other hand, there were the items with a difference of more than 10%p from the correct answer rate of similar items, among the items to which technology enhanced functions were applied following the introduction of CBT. According to the analysis of response rate of options, these results could be explained that the students' level of understanding could be more closely grasped through the innovative items developed through the technology enhanced function. Based on the results, we discussed some guidance to be considered when introducing CBT and developing items through CBT, and presented implications.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2002.11a
• /
• pp.528-533
• /
• 2002

인터넷 인프라의 보급과 이용인구의 급속한 증가는 off-line을 통해서 물리적으로 획득하던 다양한 정보와 자료를 인터넷을 통해서 쉽고 빠르게 이용할 수 있는 서비스를 창출하고 있다. 그러나 이와 같은 서비스를 통해서 제공되는 컨텐츠의 저작권 문제와 불법 복제 등과 같은 피해도 함께 증가하고 있다. 이런 문제를 해결하기 위해서는 컨텐츠에 접근하고 이용할 수 있는 자격을 가지고 있는 사용자만이 해당 컨텐츠를 정상적으로 이용할 수 있도록 하는 Access Control(AC) 기술이 함께 연구되고 있다. 현재 상용화되어 있는 CAS와 DRM은 PBT 형태의 대표적인 AC 기술이라 할 수 있다. 본 논문에서는 [5]에서 제시된 PFT 기반의 AC를 위한 Security Architecture를 살펴보고, 효과적인 운영을 위한 PFT 기반의 새로운 AC 구조를 제시한다.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.5
• /
• pp.649-655
• /
• 2004

The behavior of biological particles in DAF (dissolved air flotation) process was analyzed by employing PBT (Population balance theory). After decline growth phase of activated sludge, the value of the initial collision-attachment efficiency was increased over than 0.35 corresponding relatively high value in the whole life cycle of microorganism. For practical application of DAF as a solid separation process. It is desirable that microbial particles should be operated to perform high solid removal efficiency in biological wastewater treatment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.363-370
• /
• 2003

Shrinkage of injection molded parts is different form operational conditions of injection molding such as injection temperature, injection pressure and mold temperature, and mold design such as gate size. It is also various for different resins which have crystalline structure or not. In this study part shrinkage was investigated for various operational condition and resins; PBT for crystalline polymer, and PC and PMMA for amorphous polymer was used in experiment. Crystalline polymer shows higher part shrinkage by about three times than amorphous polymer. Part shrinkage increased as injection temperature and mold temperature increased and injection pressure decreased. Part shrinkage decreased as gate size increased since the pressure delivery is mush easier for large gate size. Part shrinkage according to the gate location was that the position in the part with close to the gate showed large shrinkage and this phenomenon might be occurred by residual stress.