• Geomechanics and Engineering
• /
• v.29 no.6
• /
• pp.683-696
• /
• 2022

Dams are inevitably planned to be built on thick overburden with high permeability and deformability. The connection part between concrete cut-off wall in overburden and earth core in dam body is not only a key part of the anti-seepage system, but also a weak position. Large uneven settlement will be aroused at the concoction part. However, the interaction behavior and the scope of the connection part cannot be determined effectively. In this paper, numerical analysis of a high earth core dam built on thick overburden was carried out with large deformation FE method. The mechanical behavior of the connection part was detail studied. It can be drawn that there is little differences in dam integral deformation for different analysis method, but big differences were found at the connection part. The large deformation analysis method can reasonably describe the process that concrete wall penetrates into soil. The high plasticity clay has stronger ability to adapt to large uneven deformation which can reduce stress level, and stress state of concrete wall is also improved. The scope of high plasticity clay zone in the connection part can be determined according to stress level of soils and penetration depth of concrete wall.

• Journal of Korean Society for Quality Management
• /
• v.52 no.2
• /
• pp.275-286
• /
• 2024

Purpose: The spare part cost is one of the most important cost factors with which construct Life Cycle Cost. The LCSP(Life Cycle Sustainment Plan) Guidebook issued by Korea Ministry of Defense, however, suggests a simple equation to estimate the spare part cost using maintenance task frequencies and each part cost. Therefore, following the cost estimation method in the LCSP Guidebook may lead to an improper cost estimation result since both the hierarchical structure of the weapon system and the part discard rate are not considered. The purpose of this study is to develop a new life cycle cost estimation method for spare parts of weapon system during its life cycle. Methods: In this study, the detailed cost structure of spare parts is provided. Also a new spare part cost estimation methods for the each cost element are proposed, considering the hierarchical structure of weapon system and the part discard rate. And the proposed spare cost estimation methods are applied to K system for a case study. Results: Based on the case study of K system, the spare part cost estimation method, proposed by this study, shows that it can complement the estimation method suggested by the LCSP Guidebook. It also shows that it is applicable to the weapon systems for Korea armed forces. Conclusion: The proposed life cycle cost estimation method for spare parts has an advantage of estimating the spare part cost more accurately. It is expected to be useful in analyzing the procurement alternatives objectively and making up the Korea armed forces budget effectively.

• The Journal of the Korea Contents Association
• /
• v.2 no.2
• /
• pp.98-102
• /
• 2002

In this paper i offer a new part-of-speech tagging method for Korean, it can solve difficulty of statistical data acquisition and ambiguities due to same part-of-speech stream input and make good use of the Corpus. This method can solve that the corpus don't have huge. This method uses pattern information about part-of-speech among eojols and constraint-rules in order to perform part-of-speech tagging. The Constraint-rule is used to select appropriate part-of-speech pattern.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.198-208
• /
• 1995

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. Test to detect stuck-open faults in BiCMOS circuit is important, since these faults do sequential behavior and are represented as transition faults. In this paper, proposes a method for efficiently detecting transistor stuck-open faults in BiCMOS circuit by transforming them into slow-to=rise transition and slow-to-fall transition. In proposed method, BiCMOS circuit is transformed into equivalent gate-level circuit by dividing it into pull-up part which make output 1, and pull-down part which make output 0. Stuck-open faults in transistor are modelled as transition fault in input line of gate level circuit which is transformed from given circuit. Faults are detceted by using pull-up part gate level circuit when expected value is '01', or using pull-down part gate level circuit when expected value is '10'. By this method, transistor stuck-open faults in BiCMOS circuit are easily detected using conventional gate level test generation algorithm for transition fault.

• Structural Engineering and Mechanics
• /
• v.69 no.1
• /
• pp.105-120
• /
• 2019

In this paper, a new efficient method for structural modal reanalysis is proposed, which can handle large finite element (FE) models requiring frequent design modifications. The global FE model is divided into a residual part not to be modified and a target part to be modified. Then, an automated matrix permutation and substructuring algorithm is applied to these parts independently. The reduced model for the residual part is calculated and saved in the initial analysis, and the target part is reduced repeatedly, whenever design modifications occur. Then, the reduced model for the target part is assembled with that of the residual part already saved; thus, the final reduced model corresponding to the new design is obtained easily and rapidly. Here, the formulation of the proposed method is derived in detail, and its computational efficiency and reanalysis ability are demonstrated through several engineering problems, including a topological modification.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.21-32
• /
• 2004

Objective: A study on $\ll$Lingchui, 靈樞 Weiqi, 衛氣$\gg$ which descripted Twelve meridian Biaoben(標本) pulse diagnosis method. Methods: A study on Twelve meridian Biaoben(標本) pulse diagnosis method which has the cognizance of Biaoben(標本) on upper and low twelve meridian as linear upper and low pulse diagnosis point. Results: Twelve meridian Biaoben(標本) pulse diagnosis method is derived from using each twelve meridian pulse diagnosis and it can be explained that the ben(本) pulse point on wrist ankle and the biao(標) pulse point on thorax axillary neck head face correspond to upper and low part of meridian for diagnosis and treatment which become the theory of "treat upper disease on low part, treat low disease on upper part". Conclusions: Twelve meridian Biaoben(標本) pulse diagnosis method started confirming the general concept of Jue-symptom(厥症) and Jue-symptom(絶症) and developed upper and low pulse diagnosis point or acupuncture point to treatment.

• Journal of architectural history
• /
• v.26 no.4
• /
• pp.35-44
• /
• 2017

The purpose of this study is to classify three-Kan hipped and gable-roofed Buddhist temples with the construction of their eave curve of part chunyeo and examine the characteristics and causes. The conclusions have been drawn as follows: First, there are largely three ways to secure symmetry in eave curve of part chunyeo. One is to obtain symmetry in eave curve of part chunyeo by making the size of eaves curves on well sides the same and forming symmetric curves in the front section along with the side roof and then forming the straight line in the central part (hereinafter referred to as the long straight line section method). The second is a method to enlarge eaves curves in the front and form eaves curves on the roof section to be symmetric (hereinafter referred to as the front is larger than side eaves curves method). The third is the method to make eaves curves in the roof section to be symmetric by adjusting the roof length and making difference between the front and side roof's length minimum (hereinafter referred to as the roof length-controlling method). Second, there are 16 cases applying two or more methods, and they are the mainstream. Third, there are 12 cases applying the front is larger than side eaves curve method and roof length-controlling method both, which seems to be the most universal. To sum up, they secured symmetry in roof edges considering the construction of seonjayeon and pyeongyeon according to the size of the structure, recognition on the directions of entrance into the area of the building, forms of planes, harmony with structures around, recognition on roof curves in accordance with the size, and also structural faults in the chunyeo part.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.236-243
• /
• 1994

In this paper we consider the part-machine cell formation decision of the generalized Group Technology(GT) problem in which multiple process routes can be generated for each part. The existing p-median model and similarity coefficient algorithm can solve only small-sized or well-structured cases. We suggest an assignment method for the cell formation problem. This method uses an assignment model which is a simple linear programming. Numerical examples show that our assignment method provides good separable cells formation even for large-sized and ill-structured problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.499-502
• /
• 1996

In this paper, we propose a fuzzy iterative learning controller(FILC). It can control fully unknown dynamic plants through iterative learning. To design learning controllers based on the steepest descent method, it is one of the difficult problems to identify the change of plant output with respect to the change of control input(.part.e/.part.u). To solve this problem, we propose a method as follows: first, calculate .part.e/.part.u using a similarity measure and information in consecutive time steps, then adjust the fuzzy logic controller(FLC) using the sign of .part.e/.part..u. As learning process is iterated, the value of .part.e/.part.u is reinforced. Proposed FILC has the simple architecture compared with previous other controllers. Computer simulations for an inverted pendulum system were conducted to verify the performance of the proposed FILC.

• Asian Journal of Innovation and Policy
• /
• v.6 no.2
• /
• pp.206-224
• /
• 2017

This article proposes a logic model for assessing the performance of the outcome of public research as a technology valuation method. It consists of two parts and eight steps. The first part is a scoring system and the second part is a validation process of the performance index derived from scoring by valuation method. The scoring in the first part generally requires a focus group method to find out the value drivers and make an evaluation table. The reason why we call it the technology valuation method is that the first part is derived from the simple evaluation of technology value using checklists for value drive. The second part is the regular technology valuation process. The model is designed for the measurement of unquantifiable outcome. Is knowledge or scientific outcome comparable to the measured outcome? If possible, how big is the unquantifiable outcome? This model is based on financial valuation techniques with clear or acceptable market data. Therefore, it cannot work solely for unquantifiable outcomes without comparable measurable outcomes, unlike economic valuation.