• Title/Summary/Keyword: PA시스템

Search Result 301, Processing Time 0.025 seconds

Fuel cell system for SUAV using chemical hydride - II. Lightweight fuel cell propulsion system (화학수소화합물을 이용한 소형 무인항공기용 연료전지 시스템 연구 - II. 경량 연료전지 추진 시스템)

  • Hong, Ji-Seok;Park, Jin-Gu;Sung, Myeong-Hun;Jeon, Chang-Soo;Sung, Hong-Gye;Shin, Seock-Jae;Nam, Suk-Woo
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.41 no.3
    • /
    • pp.233-239
    • /
    • 2013
  • A 100 W fuel cell system using chemical storage method has been applied for a propulsion system of the SUAV(Small Unmanned Aerial Vehicle). A fuel cell and battery have been combined for both the small/light hydrogen generation control system and the hybrid power supply system. A small hydrogen generation device was implemented to utilize NaBH4 aqueous solution and dead-end type PEMFC system, which were evaluated on the ground and by the flight tests. The system pressurized at a 45kpa stably operates and get higher fuel efficiency. The pressure inside of the hydrogen generation control system was maintained at between 45 kPa and 55 kPa. The 100W fuel cell system satisfies the required weight and power consumption rate as well as the propulsion system, and the fuel cell system performance was demonstrated through flight test.

A low noise, wideband signal receiver for photoacoustic microscopy (광음향 현미경 영상을 위한 저잡음 광대역 수신 시스템)

  • Han, Wonkook;Moon, Ju-Young;Park, Sunghun;Chang, Jin Ho
    • The Journal of the Acoustical Society of Korea
    • /
    • v.41 no.5
    • /
    • pp.507-517
    • /
    • 2022
  • The PhotoAcoustic Microscopy (PAM) has been proved to be a useful tool for biological and medical applications due to its high spatial and contrast resolution. PAM is based on transmission of laser pulses and reception of PA signals. Since the strength of PA signals is generally low, not only are high-performance optical and acoustic modules required, but high-performance electronics for imaging are also particularly needed for high-quality PAM imaging. Most PAM systems are implemented with a combination of several pieces of equipment commercially available to receive, amplify, enhance, and digitize PA signals. To this end, PAM systems are inevitably bulky and not optimal because general purpose equipment is used. This paper reports a PA signal receiving system recently developed to attain the capability of improved Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) of PAM images; the main module of this system is a low noise, wideband signal receiver that consists of two low-noise amplifiers, two variable gain amplifiers, analog filters, an Analog to Digital Converter (ADC), and control logic. From phantom imaging experiments, it was found that the developed system can improve SNR by 6.7 dB and CNR by 3 dB, compared to a combination of several pieces of commercially available equipment.

Design and Implementation of Audio Transmission System Based on AoIP (AoIP 기반 음향전송시스템의 설계 및 구현)

  • Kang, Min-Soo;Sung, Kil-Young;Park, Yeoun-Sik
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.8
    • /
    • pp.1415-1419
    • /
    • 2008
  • In this paper, we investigate various Audio Transmission Systems to implement Audio Transmission System based on AoIP of Internet transmission technology TCP/IP Network and we design and implement a Audio transmission system based on AoIP by adopting the most efficient one. The implemented system can be applied for various professional audio systems with large-scale audio distribution network as well as small-scale PA systems. Moreover, this can be applied in various fields which need audio transmission.

Assessing Conservation Priority of Private Land in Unexecuted Urban Parks in Seoul Using Betweenness Centrality Analysis (매개중심성 분석을 활용한 서울시 미집행공원 내 사유지 보전 우선순위 평가)

  • Hwang, Byungmook;Ko, Dongwook W.;Kang, Wanmo
    • Journal of Korean Society of Forest Science
    • /
    • v.110 no.1
    • /
    • pp.22-34
    • /
    • 2021
  • The implementation of the sunset provision of unexecuted urban parks in Seoul has been postponed; however, the mentioned parks still remain vulnerable since they can be subject to development under certain circumstances. Local governments may purchase the parks to prevent their loss but are constrained due to limited resources. The purpose of this study is to prioritize the purchase of unexecuted urban parks in Seoul based on landscape connectivity, which represents the important role of allowing the movement of wildlife and providing biodiversity in urban environments. In this study, we used four potential scenarios (PB100, PB1, PA100, PA1), which reflects the degree of land cover change resulting from the implementation of the sunset provision, and the role of Han River as a conduit or barrier for wildlife movement. Landscape connectivity was evaluated by calculating current flow betweenness centrality (CFBC). This was used to rank the importance of the unexecuted urban parks in Seoul. The results demonstrated that the implementation of the sunset provision will greatly decrease the connectivity of all parks in Seoul and particularly more so for parks in the southern part of the city. In addition, the results suggested that the low connectivity of Han river will diminish the connectivity around Bukhansan Mountain in the northern part of Seoul. Our study can be used for the prioritization of purchase, since it has the ability to evaluate the anticipated vulnerability of each park's connectivity after the sunset provision.

Sex Morph, Fruiting Habit, and Seed Viability of Acer palmatum (단풍나무의 성 형태, 결실특성 및 종자활력)

  • Kim, Gab Tae;Kim, Hoi Jin
    • Journal of Korean Society of Forest Science
    • /
    • v.101 no.1
    • /
    • pp.91-95
    • /
    • 2012
  • To examine the sex morph, heterodichogamy, fruiting characteristics and seed viabilities of Acer palmatum, sixty three planted trees were monitered in Wonju-si for two years in terms of their sex morph, flowering and fruiting habit. Most flowers of A. palmatum are pollinated by Apis mellifera, Helophilus virgatus, a few (3.57%) are pollinated by wind. Twenty four trees (42.9%) in 2010, and twenty trees (31.7%) in 2011 were proved protandrous (PA: pollen is shed before stigmas are receptive), thirty two (50.8%) in 2010, thirty trees (47.6%) in 2011 were proved protogynous (PG: stigmas are receptive before pollen is shed). This result means that Acer palmatum has heterodichogamous sexual system. Five trees (7.9%) have changed their sex morphs; 4 trees change the sex morp PA to PG, and one does the sex morph PG to PA. Rates of sound seeds and decayed seeds were significantly different between sex morphs. Rates of sound seeds were 51.6% (2010) and 64.0% (2011) in PA, but 30.4% (2010) and 40.4% (2011) in PG. and rates of decayed seeds did 40.0% (2010) and 31.2% (2011) in PA, but 65.6% (2010) and 56.8% (2011) in PG. The differences of decayed seeds' rates between sex morphs might be related with the timing of insect pests' outbreak.

The development of Intuitive User Interface and Control Software for Audio Mixer in Digital PA System (디지털전관방송시스템을 위한 오디오믹서의 직관적인 사용자 인터페이스 및 제어 소프트웨어 개발)

  • Kim, Kwan Woong;Cho, Juphil
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.11 no.3
    • /
    • pp.307-312
    • /
    • 2018
  • In this paper, we can confirm the result of intuitive interface software implementation for operating a digital PA(Public Address) controller and the performance of audio mixer control part. Developed user interface software provides the maintaining management and control function of digital hybrid mixer. This SW loaded in the integrated control server controls an sound status of the audio mixer TAD-168M and checks the device status for Public Address integrated system. Also, this SW enables the integrated control and the continuous upgrade. Developed SW is connected to TAD-168M with Ethernet and linked to PC Lan port and the 4-port switch, located in the backside of TAD-168M, by LAN cable for communicating with operating PC. Integrated control including system management, audio control and uplink broadcasting control for broadcasting system will be made available with this novel developed system.

An analysis on the characteristics of regasification system for LNG-FSRU depending on the changes in performance with vaporization and temperature of the heat source (LNG-FSRU용 재기화 시스템의 열원 온도 및 기화성능의 변동에 따른 시스템 특성분석)

  • Lee, Yoon-Ho;Kim, You-Taek;Kang, Ho-Keun
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.6
    • /
    • pp.625-631
    • /
    • 2014
  • In this study, according to increase of thermoelectric power plants that use LNG, LNG-FSRU(Floating-Storage and Regasification Unit) appeared and it is installed on the Topside in order to deliver in a gaseous state to consumers who are in the shore. This study about the study on the characteristics analysis of the system depending on changes in performance with the vaporization and temperature of the heat source. For the characteristics analysis of the system, we devided vaporization method into Ethylene glycol water vaporization method and sea water as a heat source. Then the system that can vaporize 200ton per hour of LNG of $-157.9^{\circ}C$ and 10,400kPa was configured, and according to the temperature of supplied sea water, required minimum flow rate value was calculated. Also in case of using Ethylene glycol Water as a vaporization method, providing for regional and seasonal factors such as decrease of temperature of water. The system is configured by adding a steam boiler of $174.5^{\circ}C$, 775kPa as heat source. The generation amount of the steam required according to the performance of the vaporizer compared to the water temperature changes in the steam boiler and the amount of required evaporative performance due to changes in the quantity of steam and Ethylene glycol Water was confirmed.

A Study on an Image Stabilization for Car Vision System (차량용 비전 시스템을 위한 영상 안정화에 관한 연구)

  • Lew, Sheen;Lee, Wan-Joo;Kang, Hyun-Chul
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.15 no.4
    • /
    • pp.957-964
    • /
    • 2011
  • The image stabilization is the procedure of stabilizing the blurred image with image processing method. Due to easy detection of global motion, PA(Projection algorithm) based on digital image stabilization has been studied by many researchers. PA has the advantage of easy implementation and low complexity, but in the case of serious rotational motion the accuracy of the algorithm will be cut down because of its fixed exploring range, and, on the other hand, if extending the exploring range, the block for detecting motion will become small, then we cannot detect correct global motion. In this paper, to overcome the drawback of conventional PA, an Iterative Projection Algorithm (IPA) is proposed, which improved the correctness of global motion by detecting global motion with detecting block which is appropriate to different extent of motion. With IPA, in the case of processing 1000 continual frames shot in automobile, compared with conventional algorithm and other detecting range, the results of PSNR is improved 6.8% at least, and 28.9% at the most.

A Study on Numerical Technique of the Hardened Grout Formed by Grouting (약액주입 시 형성된 고결체의 수치해석 기법 연구)

  • Lee, Jong-Hwi;Chun, Byung-Sik
    • Journal of the Korean Geotechnical Society
    • /
    • v.27 no.6
    • /
    • pp.27-37
    • /
    • 2011
  • Recently, pressure grouting is widely being used in construction site for strength improvement of ground and water proof, reinforcement and so on. It is necessarily required to estimate an appropriate injection pressure and injection time for economical and reasonable construction in the site through the size and shape of the hardened grout measured according to ground condition. However, sampling for the hardened grout is time-consuming and needs high cost on preliminary test in the site. The system which could predict the size and shape of the hardened grout does not exist until now. Thus, numerical method based on VOF method and porous model was used for the calibration chamber injection test with injection pressure (50 kPa, 100 kPa, 150 kPa) in this study. The results indicate that the numerical technique based on VOF method and porous model among CFD analysis is expected to be a basic study for the prediction of the behavior and solidification of pressure grouting.

Effect of Slip on Tractive Performance of Driving Wheel (구동륜 슬립이 견인성능에 미치는 영향)

  • 박원엽
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.10 no.1
    • /
    • pp.234-243
    • /
    • 2002
  • When a vehicle is operated over sort terrain, torque(or soil thrust) applied to driving wheel brings about shear displacement far soil due to compression and shear failure of soil under tire. This shear displacement give rise to slip and a additional sinkage due to slip. This additional sinkage is usually referred to as slip-sinkage. The slip-sinkage is affected by soil conditions and inflation pressure of tire. This slip-sinkage influence tractive performance on driving wheel . We conducted the experimental study far investigating the effect of slip on sinkage and tractive performance of driving wheel, such as motion resistance, thrust and drawbar pull. The experiment was carried out over three different soil conditions(soft, hard and very hard soil) far a tire with three levels of inflation pressure(120kPa, 240kPa and 360kPa). The results of this study show qualitatively slipsinkage characteristics and slip-tractive performance relationships of driving wheel with soil conditions and inflation pressure of tire.