• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.137-145
• /
• 2010

The mechanical properties of stone structures are generally characterized according to the strength of the stone used. An ultrasonic velocity method that does not damage cultural heritages is used to measure the strength of stone. However, there is no correction involved for surface roughness and thickness of the stone in the ultrasonic method currently used. In addition, a contact agent such as grease can cause contamination on the surface of a cultural heritage. Accordingly, this study suggests an indirect method of strength estimation formula for stone structures based on the surface roughness of the structure, its thickness, and the type of contact agent. (1) Rock strength estimation formula using ultrasonic velocity method of dabbed finish : $f_{su}=30.51\;Vp^{0.82}(R^2=95)$ (2) Rock strength estimation formula using ultrasonic velocity method of harsh finish : $f_{su}=61.52\;Vp^{0.32}(R^2=92)$.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.6
• /
• pp.83-92
• /
• 2005

Natural environment of the Wolgokri stream watershed, located in Chuncheon, Gangwon province, Korea, has been well preserved as a traditional agricultural watershed. To analyze characteristics of NPS pollution generated from an mountainous agricultural watershed, the flow and water qualities of the study watershed were monitored and were analyzed to estimate pollution loads. Annual runoff volume ratio was $70.4\%$. Concentrations of T-N, T-p, COD, and TOC were higher when monthly rainfall was between $0\~30mm$ than those when monthly rainfall was between $30\~70mm$. However, the concentrations varied considerably when monthly rainfall was higher than 100mm. The flow weighted mean concentrations(mg/L) of BOD, COD, TOC, $NO_3-N$, T-N, T-P and SS were 1.96, 2.72, 3.32, 1.41, 4.70, 0.187 and 13.36, respectively. The BOD, SS, T-N and T-P loads of July, 2004 were $48\%,\;17\%,\;51\%\;and\;32\%$ of annual load, respectively. The BOD, COD, TOC, $NO_3-N$, T-N, T-p, and SS loads (kg/ha) from Mar. 2004 to Apr. 2005 were 19.09, 26.55, 32.39, 13.85, 45.92, 1.887 and 130.18, respectively. The highest concentrations of BOD, NO3-N, T-N, T-p, SS, COD and TOC were found before the flow reached the peak runoff, possibly due to the first flushing effect. Generally, pollution loads of the Wolgokri watershed were not that significant. Phosphorus load, however, was higher enough to cause eutrophication in the receiving water body It was recommended that best management practices need to be implemented to reduce phosphorus sources.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.1
• /
• pp.74-83
• /
• 2020

A number of so-called 'Type IV' cracking was reported to occur at the welded joints of the P91 steel or P92 steel reheat steam piping systems in Korean supercritical thermal power plants. The reheat steam piping systems are subjected to severe thermal and pressure loading conditions of coolant higher than 570℃ and 4MPa, respectively. In this study, piping analyses and design evaluations were conducted for the piping system of a specific thermal plant in Korea and suggestions were made how structural integrity could be improved so that type IV cracks at the welded joints could be prevented. Integrity evaluations were conducted as per ASME B31.1 code with implicit consideration of creep effects which was used in original design of the piping system and as per nuclear-grade RCC-MRx code with explicit consideration of creep effects. Comparisons were made between the evaluation results from the two design rules. Another approach with modification or reduction of the redundant supports in the piping systems was investigated as a tool to mitigate thermal stresses which should essentially contribute to prevention of Type IV cracking without major modification of the existing piping systems. In addition, a post weld heat treatment method and repair weld method which could improve integrity of the welded joint of P91 steel were investigated.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1460-1471
• /
• 2019

This study applied the PBL class to the 'Nursing Process and Critical Thinking' courses in the second semester of 2018, and is a primitive research that utilized a single-group, pretest-posttest experimental design in order to examine the effects of the class on Critical Thinking Disposition, Problem Solving Ability, and Professional Self-Concept. Self-report questionnaires were administered to 59 nursing college students in G province. The PBL class consisted of 8 weeks of traditional lectures and 4 weeks of PBL classes. The SPSS/WIN 23.0 program was used for data analysis. Frequency and percentage were used to analyze the general characteristics, and mean, standard deviation and paired t-test were used to analyze the difference between the two groups. As a result, the Critical thinking Disposition of nursing college students was significantly increased(t=4.39, p<.001) after PBL class(3.71±.36) than before PBL class(3.41±.40). The Problem Solving Ability was notably improved(t=3.97, p<.001) after PBL class(3.70±.59) than before PBL class(3.36±.38). The Professional Self-Concept was considerably increased(t=4.84, p<.001) after PBL class(3.22±.50) compared to before PBL class(2.92±.28). Therefore, applying Problem-Based Learning in nursing education to a greater extent is estimated to be effective in increasing the core competencies of nursing college students.

• Microbiology and Biotechnology Letters
• /
• v.22 no.1
• /
• pp.92-98
• /
• 1994

The bacteria which secrete surface-active agent and decrease the surface tension of culture broth were isolated from soil samples. Among them, biosurfactant producing strain KK-7 was selected and emulsification was also detected. The KK-7 produced biosurfactant not only lipid but also glucose by using carbon source. Taxonomical characterization tests have demostrated the strain KK-7 to be Pseudomonas aeruginosa. The media composition of the P. aeruginosa KK-7 for the biosurfactant production was 1% glucose, 0.5% tryptone, 0.2% yeast extract, 0.15% potas sium phosphate mono-dibasic, 0.05% MgSO$_{4}$, initial pH 8.5, at 30$\circ $C for 2 days. In this condition, the concentration of biosurfactant was reached CMC 5 in the culture broth. Surface active material was produced maximum at stationary8 phase, but emulsification power was higher at log phase than stationary phase. It was considered that P. aeruginosa KK-7 produced biosurfactant more than one type having defferent properties and each maximum production time was different. The minimun surface tension of biosurfactant in 50 mM Tris buffer (pH8.0) was 28 dyn/cm, and CMC was 1 g/L.

• Radiation Oncology Journal
• /
• v.15 no.4
• /
• pp.305-313
• /
• 1997

Purpose : This is a retrospective study to evaluate the results of radiation therapy and prognostic factors influencing the results in nasopharyngeal carcinoma. Materials and Methods: From October 1989 to May 1996. 56 Patients were treated for nasopharyngeal carcinoma at Department of Radiation On-cology. According to stage, patients were distributed as follows : stage I (2), II (13). II (11), IV (30). Twenty-eight patients were treated with radiation therapy only, 7 patients were treated with neoadiuvant chemotherapy followed by radiation therapy. Twenty-one Patients were treated with radiation therapy and weekly CDDP. After external beam radiotherapy of 60Gy, 46Patients received boost dose with intracavitary radiation and 9 Patients with 3D conformal therapy. One patient received boost dose with 2 dimensional Photon beam therapy. The tumor dose ranged from 69.4Gy to 86.2Gy with median dose of 74.4Gy. The follow-up Period ranged from 5 months to 92 months with a median of 34 months. Results : Forty-seven patients achieved complete response and 8 Patients showed partial response. One Patient showed minimal response. Patterns of failure were as follows : locoregional recurrence (8) and distant metastasis (18). Among these patients, 2 patients failed locoregionally and distantly. The sites of distant metastasis were bone (8), lung (8) and liver (4). Five years survival rate was $67.2\%$ and 5 years disease-free survival rate was $53.6\%$. KPS (P=0.005) and response ol radiation therapy (P=0.0001) were significant prognostic factors for overall survival. KPS (P= 0.02) and response of radiation therapy (P=0.005) were significant Prognostic factors for disease-free survival. Conclusion : This retrospective study showed that distant metastasis was the Predominant pattern of relapse in nasopharyngeal cancer Neoadiuvant chemotherapy or weekly CDOP did not influence the distant metastasis-free survival. For advanced T stage, 3D conformal therapy Provided an improved dose coverage compared to ICR But further follow-up was needed in Patients with 3D conformal therapy to assess the efficacy of this therapy. Development of techniques of radiation therapy to improve locoregional control and of more effective systemic chemotherapy regimen are needed.

• Radiation Oncology Journal
• /
• v.7 no.1
• /
• pp.81-83
• /
• 1989

This study, involving thirty-two patients with carcinoma of uterine cervix treated by high dose rate intracavitary irradiation using a remotely controlled afterloading system, compares the doss at point A and 8 with the Curie-minutes prescription. A linear least-square regression analysis was used to compare the two sets of date. Correlation coefficients between doses at points A and B and the Ci-min prescription are 0.92 (p<0.001) and 0.90 (p<0.001), respectively, and linear relationship is observed between these two system. The limitation and significance of the comparison of the two approaches to intracavitary dosimetry is discussed.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.34-39
• /
• 2001

Submerged Membrane Bio-Reacter(SMBR) process was used to food wastewater treatment. From laboratory pilot-scale experiment data, it was confirmed that this process was very effective process for organics, suspended solid, and N, P treatment. It was found that BOD and COD removal rate were obtained 90% and 92%, respectively, for 150 days operation. Organics loading rate did not affect to the removal efficiency because MLSS concentration in aerobic tank was highly maintained. IN the case of first reactor operated with anoxic and second reactor operated as aerobic, T-N, T-P removal rate were obtained 93% and 95%, respectively. It was shown that removal efficiency could be maintained stable due to the complete removal of SS and sludge production decreased with increasing of sludge retention time.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.273-277
• /
• 2002

In the electrode fabrication of unit cell, we found that optimal the electrochemical characteristics were obtained with at 90 wt.% of activated carbon(BP-20), 5 wt.% of conducting agent(Ppy, Super P) and 5 wt.% of P(VdF-co-HFP)/PVP mixed binder. The electrochemical characteristics of unit cell with Ppy improver were as follows : 37.6 F/g of specific capacitance, 0.98 $\Omega$ of AC-ESR, 2.92 Wh/kg and 6.05 Wh/L of energy density, and 754 W/kg and 1,562 W/L of power density. It was confirmed that internal resistance were reduced due to the increase of electrical conductivity and filling density by the introduction of conductivity agent, and content of conducting agent was suitable in the range of 4~6 wt.%. According to the impedance measurement of the electrode with conductivity agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance(AC-ESR), fast charge transfer rate at interface between electrode and electrolyte, and low RC time constant.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.92-93
• /
• 2003

초고속 광전송 네트워크에 사용되는 광부품으로 단일 모드 광섬유와의 낮은 광 결합 손실을 가지는 레이저 다이오드 개발이 필수적이다. 이러한 레이저 다이오드의 요구되는 특성으로써 저가의 광부품 제작을 위해 thermoelectric cooler 없이 고온에서 안정된 동작을 하는 uncooled type에, 광 isolator 도움없이 광반사에 의한 광손실을 줄여야 한다. 이러한 요건을 충족시키기 위하여 선택적 영역 MOCVD성장을 이용한 InP／InGaAsP 계열의 SSC-LD(spot-size converter integrated LD)를 연구하여 왔다. (중략)