• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.53.1-53.11
• /
• 2020

Objectives: This study investigated the incidence of root dentin defects after the use of different post space preparation (PSP) drills. Materials and Methods: Seventy-two bovine incisors were selected and obtained 14-mm-long root sections. Twelve roots served as controls with no intervention (G1). The 60 root canals remaining were instrumented using the crown-down technique with the ProTaper Next system and obturated using the lateral condensation technique. Specimens were randomly distributed into 5 groups (n = 12) according to the operative steps performed: G2, root canal instrumentation and filling (I+F); G3, I+F and PSP with Gates-Glidden drills; G4, I+FI+F and PSP with Largo-Peeso reamers; G5, I+F and PSP with Exacto drill; and G6, I+F and PSP with WhitePost drill. Roots were sectioned at 3, 6, 9, and 12 mm from the apex, and digital images were captured. The presence of root dentin defects was recorded. Data were analyzed by the χ² test, with p < 0.05 considered to indicate statistical significance. Results: Root dentin defects were observed in 39.6% of the root sections. No defects were observed in G1. G5 had significantly more cracks and craze lines than G1, G2, and G3 (p < 0.05), and more fractures than G1, G2, G3, and G4 (p < 0.05). When all root sections were analyzed together, significantly more defects were observed at the 12-mm level than at the 3-mm level (p < 0.05). Conclusions: PSP drills caused defects in the root dentin. Gates-Glidden drills caused fewer root defects than Largo-Peeso reamers and Exacto drills.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.3
• /
• pp.39-47
• /
• 2016

In this study, dynamic centrifuge tests in dry sand were conducted in order to evaluate the effect of pile installation on the dynamic p-y curve. According to the result of the pile installation effect on the dynamic p-y backbone curves, the subgrade resistance of a jacked pile in 40 g was found to be greater than that of a jacked pile in 1 g and a preinstalled pile in 1 g. It was also found that differences of the subgrade resistance decrease with the depth of the pile. Applicability of dynamic p-y backbone curve for the bored pile proposed by preceded researcher was evaluated by comparing with the result of centrifuge tests. In addition, dynamic p-y backbone curve for jacking/driven pile was developed by modifying that for the bored pile.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.232-237
• /
• 2000

Theses studies were made on the mevinolin production from Penicillium citrinum Thom (KCTC 6990) Culture conditions pH temperature carbon sources nitrogen sources mineral sources surfactants and glucose concentration were optimized. The results of glucose concentration and maximum mevinolin production according to incubating time in the flask nearly disappeared after 5 days and appeared after 7 days respectively. temperature and pH conditions of maximum mevinolin production were $24^{\circ}C$ and 3.7 pH respectively. The results of maximum mevinolin production according to the kind of nutrients were as follows. Glucose of carbon sources were 3.5 mg/L. Peptone of nitrogen sources were 3.5 mg/L TEX>$K_2HP0_4$ of mineral sources was 3.8 mg/L Tween 20 of surfactants were 4.5 mg/L Maximum mevinolin productioni of glucose con-centration was 4.0mg/L of glucose 100 g/L In the batch culture Maximum mevinolin concentration was 10.3 mg/L after 8 days. maximum mevinolin specific production rate 0.016 mg/g-hr. These results need to be studied more than ever about temperature pH 야ㅕㅡ and treatment of by-product oil in the batch culture and must do the fad batch from now to increase mevinolin productivity.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.207-210
• /
• 2000

Pseudomonas oleovorans was cultivated to produce medium chain length polyhydroxyalkanoates (MCL-PHA) fram octanoic acid and ammonium nitrate as carbon and nitrogen source, respectively, by a pH-stat fed-batch culture technique. The octanoate concentration of the culture broth was maintained below 4 g/L by feeding the mixture of octanoic acid and ammonium nitrate when the culture pH rose above high limit. The effect of the ratio of octanoic acid to ammonium nitrate (C/N ratio) in the feed on the PHA production was examined. The final cell concentrations of 62.5, 54.7, and 9.5 g/L, PHA contents of 62.9, 75.1, and 67.6% of dry cell weight, and productivities of 1.03, 0.632, and 0.161 g/L/h were obtained when the C/N ratio in the feed were 10, 20, and 100 g octanoic acid/g ammonium nitrate, respectively.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.509-522
• /
• 1996

By studying the relationship between the morphology of mandibular symphysis and craniofacial morphology in classIII malocclusion, this study aims at deciding whether the morphogy of mandibular symphysis can be used as a predictor on the growth of mandible. The materials used for this study were the cephalometric radiographs of male class III malocclusion. The subjected age groups were 10-12(G1 group) and 20 and above(G2 group): 50 were selected from each group. Each group was again divided, according to the ratio of symphysis, into Large(L), Average(A), and Small(S). The results of this study were summarized as follows: 1. In average the ratio of symphysis, G2 group showed significantly bigger than G1 group(p<0.05) 2. In both G1 and G2 groups, the ratio of symphysis had no relationship with the measurements on the cranial base and the maxilla(p>0.05). 3. In both G1 and G2 groups, there was not distinct difference in the antero-posterior positions among L, A, S subgroups. 4. L and A subgroups showed significantly larger than S subgroup in lower gonial angle and chin angle in G1 group (p<0.05). 5. In the measurements on the vortical relation of the face, anterior total face height(ATFH) and anterior lower face height(ALFH) of L subgroup were significantly larger than that of S subgroup in G1 group(p<0.05) and also mandible showed a tendency to grow downward vertically. 6. In the measurements on the tooth position and inclination, L subgroup showed as compared with S subgroup a tendency of extrusion of maxillary and mandibular teeth in G1 group, but G2 group showed such tendency only in mandibular teeth. 7. In the measurements on the abnormal growth prediction by Schulhof, in G1, there was no significant difference among L, A, S sugroups. 8. In the correlative analysis of the ratio of symphysis and other measurements, G1 group showed significant correlationships in chin angle, PP/MP angie, ANS-Me and other, while G2 group showed the same only in MP-LIT and MP-LMMC(p<0.05, p<0.01). In summarizing the above, in the G1 group, consisting of young males, no difference was noted in horizontal relation between L and S subgroups; in vertical relation, L subgroup showed a stronger tendency of downward growth of mandible than S subgroup. In adult male G2 group, however, no distinct morphological difference of craniofacial complex by the ratio of symphysis.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.9-15
• /
• 2004

A large tons of spent iron oxide catalyst come from the Styrene Monomer(SM) production company. It is caused to pollute the land and underground water due to the high alkali contents in the catalyst by burying them in the landfill. In order to recycle the spent catalyst, a basic study on the recovery of chromium ion from metal plating wastewater with the spent catalyst was carried out. The iron oxide catalyst adsorbed physically $Cr^{+6}$ in the lower pH 3.0, that is the isoelectric point of the spent catalyst. It was found that the iron oxide catalyst reduced the $Cr^{+6}$ into Cr+3 by the oxidation of ferrous ion into ferric ion on the surface of catalyst, and precipitated as $Cr(OH)_3$ in the higher than pH 3.0. The $Cr^{+6}$ was recovered 2.0∼2.3g/L catalyst in the range of pH 0.5∼2.0, but it was recovered 1.5 g/L catalyst at pH 3.0 of wastewater. The recovery of Cr was increased as the higher concentration in the continuous process, but the flowrates were nearly affected on the Cr recovery.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.283-287
• /
• 1993

p-(2,2,3,3-Tetracyanocyclopropyl)phenyl acrylate (3a) and p-(2,2,3,3-tetracyanocyclopropyl)phenyl methacrylate (3b) were prepared by the reactions of bromomalononitrile with p-acryloyloxybenzylidenemalononitrile (2a) or p-methacryloyloxy-benzylidenemalononitrile (2b), respectively. Compounds 3a and 3b were polymerized with free radical initiators to obtain the polymers with multicyano functionalities in the cyclopropane ring. The resulting polymer 4a was soluble in acetone but the polymer 4b was not soluble in common solvents. The inherent viscosities of polymers 4a were in the range of 0.10-0.15 dL/g in acetone and those of 4b were in the range of 0.20-0.30 dL/g in 98% sulfuric acid. Solution-cast films were cloudy and brittle, showing $T_g$ values in the range of 106-125$^{\circ}$C.

• Nutrition Research and Practice
• /
• v.17 no.5
• /
• pp.1028-1041
• /
• 2023

BACKGROUND/OBJECTIVES: This study aimed to analyze the potential of school meals in South Korea as a sustainable tool to reduce carbon emissions by focusing on animal- vs. plant-based protein foods. MATERIALS/METHODS: By using a stratified proportional allocation method, 536 out of the 11,082 schools nationwide were selected including 21 kindergartens, 287 elementary-, 120 middle- and 108 high schools. A total of 2,680 meals served for 5 consecutive days (June 21-25, 2021) were collected. We analyzed the average serving amounts of protein foods (animal- vs. plant-based) per meal and then, calculated the estimated average amounts of carbon emission equivalents per meal by applying the conversion coefficients. The t-test and analysis of variance were used for statistical analyses (α = 0.05). RESULTS: The average serving amount of animal-based protein foods per meal was 12.5 g, which was approximately 3 times higher than that of plant-based ones (3.8 g) (P < 0.001); the Meat-group had the highest average amount of 17.0 g, followed by Egg-group (9.6 g), Fish-group (7.6 g), and Beans-and-Nuts-group (3.8 g) (P < 0.05). Specifically, pork (25.1 g) was ranked first, followed by poultry (19.6 g), processed meat products (18.0 g). The estimated average amount of carbon emission equivalents of animal-based protein foods per meal was 80.1 g CO₂e, which was approximately 31 times higher than that of plant-based ones (2.6 g CO₂e) (P < 0.001); the Meat-group had the highest average amount of 120.3 g CO₂e, followed by Fish-group (44.5 g CO₂e), Egg-group (25.9 g CO₂e), and Beans-and-Nuts-group (2.6 g CO₂e) (P < 0.05). Specifically, processed meat products (270.8 g CO₂e) were ranked first, followed by pork (91.7 g CO₂e), and processed fish products (86.6 g CO₂e). CONCLUSIONS: The results implied that school meals with plant-based alternatives could be a sustainable tool to improve carbon footprint.

• Journal of Ginseng Research
• /
• v.34 no.3
• /
• pp.219-226
• /
• 2010

In the present study, we investigated whether a gross deletion in the nef gene ($g{\Delta}nef$) is induced by Korean red ginseng (KRG) intake. Ten patients were treated with KRG powder for 3 years in the absence of antiretroviral drug therapy. On average, $3,555{\pm}1,042\;g$ KRG was administered per person over $36.1{\pm}2.4$ months. There was a mild decrease in CD4 T cell count ($75{\pm}110/{\mu}L$) over the $36.1{\pm}2.4$ months (p = 0.059). We obtained 355 nef amplicons using 71 peripheral blood mononuclear cell samples over a 3-year period. All ten patients exhibited g${\Delta}$nef (range, 3.2 to 45.9%). At baseline, 3 of 78 amplicons (3.8%) exhibited $g{\Delta}nef$, whereas 18.8% (52/277) revealed $g{\Delta}nef$ during KRG-intake (p<0.001). The proportion of $g{\Delta}nef$ was significantly correlated with monthly dose of KRG (r=0.89, p<0.001). The median time for first detection of $g{\Delta}nef$ was 13 months. In conclusion, our data show that $g{\Delta}nef$ is inducible by KRG intake and its proportion is dependent on the duration of KRG intake and dose of KRG.

• Korean Journal of Veterinary Research
• /
• v.63 no.4
• /
• pp.40.1-40.7
• /
• 2023

To optimize the most efficient method for porcine in vitro maturation (IVM), we compared the effects of supplementing extracellular vesicles (EVs) derived from porcine follicular fluid (pFF). The cumulus oocyte complexes were grouped into 4 groups with different supplementations as following: pFF (G1), pFF-depleted EVs (G2), EVs (G3) and control (G4) groups. After IVM with different supplementations, maturation rates and the developmental competences of porcine oocytes and blastocyst development were investigated. Additionally, glutathione (GSH) and reactive oxygen species (ROS) levels were measured in mature oocytes. The EVs were isolated and characterized with cryo-TEM and nanoparticle tracking analysis. The pFF significantly affected the maturation rate, whereas the presence of EVs did not show notable difference in the maturation rates. Although there were numerical increases in the measured parameters in EV and pFF-depleted EVs groups, no significant differences were observed between them. The EV group showed similar oocyte maturation rate for both positive and negative control groups. The GSH was not different among the groups, but ROS levels were significantly lower in pFF-supplemented group when compared with other groups with the highest level in the control group. G2 group wasn't significantly different G1 and G3 group. G3 group wasn't significantly different from G2 and G4 group. This suggests that EVs in IVM medium which probably effected partially to protect against oxidative stress and potentially enhance the quality of oocytes. This study indicates that the EVs in pFF play a significant role in improving the efficiency of oocyte maturation in porcine.