• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.583-587
• /
• 2004

The 7 sheep microsatellite markersOarFCB48, OarAE101, MAF33, OarFCB11, MAF70, OarFCB304 and OarFCB128, which were located on chromosomes 2, 4, 6, 9, 17 and 19, were selected to PCR in Hu sheep, Tong sheep and their closely related species,the goat. They were studied with the amplifying result of 7 microsatellite sites of Hu Sheep, Tong Sheep and goats, the data of allele number and range of allele' size of amplifying were analyzed with ANOVA. The results showed that there were no significant differences (p<0.05) in microsatellite DNA sites among 3 populations. Concerning the conservation of microsatellites in closely related species, selecting microsatellite sites located on the chromosome where the Robertsonian fusion was caused between sheep and goat, may be used in research into genetic differentiation and evolutionary relationships between sheep and goats.

• Korean Journal of Acupuncture
• /
• v.27 no.2
• /
• pp.95-105
• /
• 2010

Objectives : The purpose of this study is to investigate the effect of Bacillus-fermented Scutellariae Radix acupuncture solution (SB) on interleukin(IL) production in mouse macrophage stimulatedby lipopolysaccaride(LPS). Methods : Productions of interleukins were measured y High-throughput Multiplex Bead based Assay with Bio-plex Suspension Array System based on $xMAP^{(R)}$(multi-analyte profiling beads) technology. To begin with, cell culture supernatant was obtained after treatment with LPS(1 ${\mu}g/mL$) and SB for 24 hour. Then, it was incubated with the antibody-conj${\mu}g$ated beads for 30 minutes. And detection antibody was added and incubated for 30 minutes. After incubating for 30 minutes, Strepavidin-conjugated Phycoerythrin(SAPE) was then added. Incubating for another 30 minutes, the level of SAPE fluorescence was analyzed on Bio-plex Suspension Array System. Results : The results of the experiment are as follows. SB significantly inhibited the LPS-induced production of IL-3($9.15{\pm}0.35$ pg/mL) by $6.92{\pm}0.05,\;7.21{\pm}0.11,\;6.96{\pm}0.33,\;and\;7.45{\pm}0.74$ pg/mL at the concentration of 25, 50, 100, and 200 ${\mu}g/mL$ in mouse macrophage RAW 264.7 cells (p<0.05). SB significantly inhibited the LPS-induced production of IL-5($7.30{\pm}0.48$ pg/mL) by $6.50{\pm}0.29,\;6.30{\pm}0.25,\;6.30{\pm}0.25,\;and\;5.80{\pm}0.25$ pg/mL at the concentration of 25, 50 100, and 200 ${\mg}g/mL$ in RAW 264.7 cells (p<0.05). SB significantly inhibited the LPS-induced productiion of IL-9($17.26{\pm}0.19$ pg/mL) by $15.01{\pm}0.43$ pg/mL at the concentration of 25 ${\mu}g/mL$ in RAW 264.7 cells(p<0.05). SB significantly inhibited the LPS-induced productioh of IL-13($187.80{\pm}2.90$ pg/mL) by $152.80{\pm}4.25,\;172.80{\pm}3.97,\;162.10{\pm}6.67,\;and\;165.30{\pm}11.80$ pg/mL at the concentration fo 25, 50, 100, and 200 ${\mu}g/mL$ in RAW 264.7 cells(p<0.05). SB significantly inhibited the LPS-induced production of IL-17($18.30{\pm}0.95$ pg/mL) by $13.30{\pm}1.25,\;13.80{\pm}1.11,\;13.30{\pm}0.75,\;and\;14.00{\pm}1.08$ pg/mL at the concentration of 25, 50 100, and 200 ${\mu}g/mL$ in RAW 264.7 cells(p<0.05). SB significantly inhibited the LPS-induced production of IL-23($43.90{\pm}0.83$ pg/mL by $39.50{\pm}1.26,\;38.00{\pm}1.78,\;and\;39.60{\pm}2.49$ pg/mL at the concentration of 25, 100, and 200 ${\mu}g/mL$ in RAW 264.7 cells(p<0.05). Conclusions : These results suggest that SB has anti-inflammatory activity related with its inhibition of IL-3, IL-5, IL-13, IL-17, and IL-23 production in macrophages.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.164-171
• /
• 2020

Adsorption characteristics of reactive red 120 (RR 120) dye by a coal-based granular activated carbon (CGAC) from an aqueous solution were investigated using the amount of activated carbon, pH, initial concentration, contact time and temperature as adsorption variables. Isotherm equilibrium relationship showed that Langmuir's equation fits better than that of Freundlich's equation. The adsorption mechanism was considered to be superior to the adsorption of monolayer with uniform energy distribution. From the evaluated Langmuir separation coefficients (R_L = 0.181~0.644), it was found that this adsorption process belongs to an effective treatment area (R_L = 0~1). The adsorption energy determined by Temkin's equation and Dubinin-Radushkevich's equation was E = 15.31~7.12 J/mol and B = 0.223~0.365 kJ/mol, respectively. The adsorption process showed the physical adsorption (E < 20 J/mol and B < 8 kJ/mol). The adsorption kinetics followed the pseudo first order model. The adsorption reaction of RR 120 dye on CGAC was found to increase spontaneously with increasing the temperature because the free energy change decreased with increasing the temperature. The enthalpy change (12.747 kJ/mol) indicated an endothermic reaction. The isosteric heat of adsorption (△H_x = 9.78~24.21 kJ/mol) for the adsorption reaction of RR 120 by CGAC was revealed to be the physical adsorption (△H_x < 80 kJ/mol).

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.168-175
• /
• 2011

This study was conducted to examine the impacts of different soil water potentials on environmental soil properties related to the moisture injury of Korean raspberry (Rubus coreanus Miq.). Soil water potential in the plastic film house plots was differentiated from -5 to -40 kPa. Soils in the plots contained 5.6% of plant available water. Increasing soil water contents based on the changes in water potential increased soil pH and exchangeable $Ca^{2+}$ content and decreased exchangeable $K^+$ and total N contents. It also declined soil organic matter content at 9 days after water treatments. Relationship between water potential and soil water content was given as an exponential equation, y = 96.534 - 20.28In(x). In particular, when the water potential was higher than -20 kPa (27.5% of soil moisture content), it decreased chlorophyll content in the raspberry leaves, inhibited N uptake by the plant, and increased phosphorus content with increasing days after water treatment. Also, as the 7 days after water treatment at higher than -20 kPa of water potential, the root activity of the plant was significantly decreased, and trunk (top)/root (T/R) ratio of the plant markedly declined until 9 days after water supply. Carbohydrate contents in the raspberry plant leaves and roots at dormant stage were the lowest at -5 and -10 kPa of water potential plots, and it may cause winter injury to the plant.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.35-43
• /
• 1973

Since automatic silk reeling machine has been used in the fold, silk reeling tension has been considered to be an important matter. Such silk reeling tension affects on the physical nature of silk which would be Wire Silk in case of super high reeling velocity. This will be a report regarding with the silk reeling tension used Korean cocoon and various analyses are carried out where reached to following results. 1. Korean silk is still far from Wire Silk yet produced as general silk. 2. There is more possibility to increase silk reeling velocity if cocoon nature is improved. 3. At present, it is considered that the optimum reeling velocity is to be about 190 r.p.m. which is corresponded with 0.4∼0.5 g/d silk reeling tension. 4. This report has prepared a silk reeling tension contolling diagram against reeling velocity as shown at Figure 7. The mathematical relations between them are; A. in case of total silk reeling tension; Y=5.0831＋0.0381X(Y; total reeling tension, g/21d, X; reeling velocity, m/min) B. in case of initial silk reeling tension; Y=3.1922＋0.0175X (Y; initial reeling tension, g/21d, X; reeling velocity, m/min) 5. The main problems for the increase of silk reeling velocity is considered to be Break Down of Silk Reeling Ends caused by Cocoon Jumping or Cocoon Layer Seperation during the silk reeling work. Such troubles are concerned with the produced cocoon nature.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.568-572
• /
• 2006

To study the effect of sequence on DNA structure, the two decamer crystal structures one alternating,d(GTACGCGTAC), and the other non-alternating, d(GGCCGCGGCC), were solved. Crystals of both decamers belong to the hexagonal space group $P6_122$, with one strand in the asymmetric unit. The unit cell constants of the alternating decamer are a = b = 39.26 $\AA$, c = 77.70 $\AA$. The structure was refined with 1,828 reflections from 8.0 to 2.0 Aresolution to an R value of 21.3% with all DNA atoms and 63 water molecules. The isomorphous non-alternating decamer had unit cell dimensions of a = b = 39.05 $\AA$, c = 82.15 $\AA$. The structure was refined with 2,423 reflections from 8.0 to 2.0 $\AA$ resolution to a final R value of 22.2% for all DNA atoms and 65 water molecules. Although the average helical parameters of the decamers are typical of A-DNAs, there are some minor differences between them. The helical twist, rise, x-displacement, inclination and roll alternate in the alternating decamer, but do not in the non-alternating decamer. The backbone conformations in both structures show some differences; the residue G(7) of the alternating decamer is trans for $\alpha$ and $\gamma$ while the trans conformations are observed at the residue G(8) of the non-alternating decamer.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.26-35
• /
• 2013

Outbreak of animal infectious diseases such as foot-and-mouth disease, avian influenza are becoming prevalent worldwide. For prevent the further infection, tremendous numbers of the infected or culled stocks are buried around farm. This burial method can generate a wide range of detrimental components such as leachate, nutrient, salt, and pathogenic bacteria, consequently. In this study, for the stabilization of livestock carcasses leachate, advanced oxidation processes utilizing the Fenton reaction was investigated in lab-scale experiments for the treatment for $COD_{Cr}$ of livestock carcass leachate. $COD_{Cr}$ reduction by the Fenton oxidation was investigated response surface methodology using the Box-Begnken methods were applied to the experimental results. A central composite design was used to investigate the effects of the independent variables of pH ($x_1$), dosage of $FeCl_2{\cdot}4H_2O$ ($x_2$) and dosage of $H_2O_2$ ($x_3$) on the dependent variables $COD_{Cr}$ concentration ($y_1$). A 1 M NaOH and $H_2SO_4$ was using for pH control, $FeCl_2{\cdot}4H_2O$ was used as iron catalyst and NaOH was used for Fenton reaction. The optimal conditions for Fenton oxidation process were determined: pH, dosage of $FeCl_2{\cdot}4H_2O$ and dosage of $H_2O_2$ were 3, 0.6 g (0.0151 M) and 7 mL(0.259 M), respectively. Statistical results showed the order of significance of the independent variables to be pH > initial concentration of ferrous ion > initial concentration of hydrogen peroxide.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.471-478
• /
• 2011

Investigations of crystal structure and phase transition of $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics doped with A-site substitution impurity (La, Nd) or B-site substitution impurity (Sb, Nb) at 2 mol% concentration were carried out. X-ray diffraction patterns of impurities doped $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics have been measured at pressures up to ~5 GPa with diamond anvil cell and synchrotron radiation. The patterns were obtained at room temperature using methanol-ethanol mixture as pressure-transmitting media. In order to refine the crystal structure, Rietveld analysis has been performed. The structures of impurities doped $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics are tetragonal in space group P4mm at ambient pressure and are transformed into a cubic phase in space group Pm$\bar{3}$m as the pressure increases. In this study, when A-site substitution donor $La^{3+}$ or $Nd^{3+}$ ion was added to $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics, the phase transition phenomena showed up at the pressure of 2.5~4.6 GPa, but when B-site substitution donor $Nb^{5+}$ or $Sb^{5+}$ ion was added to it, the phase transition appeared at relatively lower pressure of 1.7~2.6 GPa.

• Journal of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.3-14
• /
• 1976

The crystal structure of alicylaldehyde-4-piperidinothiosemicarbazone, $C_{13}H_{l7}N_3OS$, has been determined by single crystal X-ray analysis. The crystals are orthorhombic, space group $P2_12_12_1$, with unit cell dimensions a = 6.52(2), b = 13.42(4), c = 14.92(4)${\AA}$. There are four formular units in a unit cell. The structure was solved by the heavy atom method and refined by isotropic block diagonal least-squares methods to a final R value of 0.10 for 1019 observed reflections. The oxygen atom of the hydroxyl group is involved in two hydrogen bonds, one as donor in the intramolecular O-H${\cdots}$N hydrogen bond and the other as acceptor in the intermolecular N-H${\cdots}$O hydrogen bond, the distances of the hydrogen bonds 2.56 and 3.00${\AA}$ respectively.The molecules are joined into infinite columns by the N-H${\cdots}o$O hydrogen bonds which form spirals along the two fold screw axis parallel to the a axis. The molecular columns are held together by van der Waals forces.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.271-277
• /
• 2015

PURPOSE. This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau$^{(R)}$Zirconia and ZENOSTAR$^{(R)}$ZR translucent) and lithium disilicate glass ceramic (IPS e.max$^{(R)}$press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. RESULTS. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) (P<.05). Both fabrication systems and finish line configurations significantly influenced the absolute marginal discrepancy (P<.05). CONCLUSION. The lithium disilicate glass ceramic crown (IPS e.max$^{(R)}$press) had significantly smaller marginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR$^{(R)}$ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) had overextended margins.