• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.86-90
• /
• 2003

A flat conversion loss in microwave mixer is hard to achieve if integrating with an image rejection filter(IRF). This is due to the change of termination condition with respect to the LO and IF frequency at RF port where the filter has 50 ohm termination property only in the RF band. This paper describes a flatness maintenance in the down mixer concerning a diode matching condition as well as an electrical length of embedding line at RF port. The implemented single balance diode mixer is suitable for a 23 ㎓ European Terrestrial Radio. RF, LO and fixed IF frequency chosen in this paper are 21.2∼22.4 ㎓, 22.4∼23.6 ㎓ and 1.2 ㎓, respectively. The measured results show a conversion loss of 8.5 ㏈, flatness of 1.2 ㏈ p-p, input P1㏈ of 7㏈m, IIP3 of 15.42 ㏈m with nominal LO power level of 10㏈m. The return loss of RF and LO port are less than - 15 ㏈ and - 12 ㏈, respectively and IF port is less than - 6 ㏈. LO/RF and LO/IF isolation are 18 ㏈ and 50 ㏈, respectively. This approach would be a helpful reference for designing up/down converter possessing a filtering element.

• 통합자연과학논문집
• /
• 제7권2호
• /
• pp.130-137
• /
• 2014

Resins were synthesized by mixing N-phenylaza-15-crown-5 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) divinylbenzene (DVB) copolymer with crosslink of 1%, 2%, 6%, and 12% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, thermo gravimetric analysis (TGA), surface area, and IR-spectroscopy. The effects of pH, equilibrium arrival time, dielectric constant of solvent and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ions were showed fast adsorption on the resins above pH 4. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium (VI) > zinc (II) > europium (III) ions. The uranium ion adsorbed in the order of 1%, 2%, 6%, and 12% crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• Molecules and Cells
• /
• 제42권5호
• /
• pp.418-425
• /
• 2019

Multicistronic elements, such as the internal ribosome entry site (IRES) and 2A-like cleavage sequence, serve crucial roles in the eukaryotic ectopic expression of exogenous genes. For utilization of multicistronic elements, the cleavage efficiency and order of elements in multicistronic vectors have been investigated; however, the dynamics of multicistronic element-mediated expression remains unclear. Here, we investigated the dynamics of encephalomyocarditis virus (EMCV) IRES- and porcine teschovirus-1 2A (p2A)-mediated expression. By utilizing real-time fluorescent imaging at a minute-level resolution, we monitored the expression of fluorescent reporters bridged by either EMCV IRES or p2A in two independent cultured cell lines, HEK293 and Neuro2a. We observed significant correlations for the two fluorescent reporters in both multicistronic elements, with a higher correlation coefficient for p2A in HEK293 but similar coefficients for IRES-mediated expression and p2A-mediated expression in Neuro2a. We further analyzed the causal relationship of multicistronic elements by convergent cross mapping (CCM). CCM revealed that in all four conditions examined, the expression of the preceding gene causally affected the dynamics of the subsequent gene. As with the cross correlation, the predictive skill of p2A was higher than that of IRES in HEK293, while the predictive skills of the two multicistronic elements were indistinguishable in Neuro2a. To summarize, we report a significant temporal correlation in both EMCV IRES- and p2A-mediated expression based on the simple bicistronic vector and real-time fluorescent monitoring. The current system also provides a valuable platform to examine the dynamic aspects of expression mediated by diverse multicistronic elements under various physiological conditions.

• 한국산업보건학회지
• /
• 제24권2호
• /
• pp.146-151
• /
• 2014

Objectives: Chrysotile is mineralogically distinct from amphiboles, displaying a notably different chemical structure. The thin sheets that form chrysotile fiber lead to the ability of the lung/macrophage system to decompose the chrysotile fibers. This study was performed in order to compare the physicochemical characteristics of Korean asbestos with those of Canadian amphiboles. Materials: An acid solubility test for each test substance was done to compare pH 4.5 and pH 1.2 distilled water. Asbestos fibers which had been placed in acid solutions for five days, five weeks and weeks were analyzed with a transmission electron microscope equipped with an energy dispersive X-ray spectrometer (TEM-EDS). Results: The composition element (Mg) of Korean chrysotile, Korean anthophyllite and Canadian amosite significantly decreased from 5 days and also decreased significantly after 5 weeks and 10 weeks. Only the composition (Mg) of Canadian crocidolite did not change under any conditions. From 5 days, the Mg of Korean chrysotile, Korean anthophyllite and Canadian amosite were significantly lower than before the acid treatment, but there were no changes over time or by the pH of the acid solutions. Particularly after 10 weeks, the composition (Mg) of Korean chrysotile in the pH 1.2 acid solution showed a rapid reduction of 15.86%. Conclusions: Korean chrysotile was very weak in an acid environment, beginning to show significant changes after 5 days. The Mg component rapidly decreased after 10 weeks in the pH 1.2 acid solution.

• Structural Engineering and Mechanics
• /
• 제2권1호
• /
• pp.95-112
• /
• 1994

This paper describes the formulation and application of a dynamic model for a conventional rail track subjected to arbitary loading functions that simulate wheel/rail impact forces. The rail track is idealized as a periodic elastically coupled beam system resting on a Winkler foundation. Modal parameters of the track structure are first obtained from the natural vibration characteristics of the beam system, which is discretized into a periodic assembly of a specially-constructed track element and a single beam element characterized by their exact dynamic stiffness matrices. An equivalent frequency-dependent spring coefficient representing the resilient, flexural and inertial characteristics of the rail support components is introduced to reduce the degrees of freedom of the track element. The forced vibration equations of motion of the track subjected to a series of loading functions are then formulated by using beam bending theories and are reduced to second order ordinary differential equations through the use of mode summation with non-proportional modal damping. Numerical examples for the dynamic responses of a typical track are presented, and the solutions resulting from different rail/tie beam theories are compared.

• 생명과학회지
• /
• 제12권2호
• /
• pp.188-199
• /
• 2002

Xylanase를 생산하는 내열성 Bacillus pumilus TX703의 chromosomal DNA로부터 xylanase 유전자를 cloning하여 그 염기배열 순서를 결정한 다음 이로부터 유전자 발현에 관련된 구조를 분석하였다. Xylanase 유전자의 cloning을 위해 제한효소 HindIII로 절단한 B. pumilus TX703의 chromosomal DNA와 pUC19을 ligation시켜 E. coli DH5 $\alpha$에 형질전환시킨 후 형질전환체 중에서 xylanase 활성을 나타내는 재조합 plasmid pXES106을 분리하였다. 재조합 plasmid pXES106은 pUC19의 HindIII 부위 내에 2.24 kb의 외래 DNA가 삽입되었고, 이 plasmid DNA를 분리하여 E. coli DH5 $\alpha$에 재형질전환시킨 결과 vector 내에 xylanase 유전자가 cloning되었음을 확인하였다. Cloning된 유전자의 염기배열을 분석한 결과 이 유전자의 총 크기는 2,187 bp였고 이는 409개기 아미노산을 coding 하는 open reading frame 1,227 bp를 포함하고 있었다. 이 염기배열은 ATG개시 codon으로부터 각각 193과 216 base 상류에 TTTAAT의 -10 box와 TCGAAA인 -35 box로 추정되는 염기배열이 존재하였고 -10 box로부터 7 bp하류에 전사개시점인 A가 위치하고 있었다. 또한, 개시 codon으로부터 432 bp 상류에 공통염기배열과 14개의 염기 중 11개의 염기가 일치하는 TGATGGCGTCGGCA의 catabolite responsive element (CRE)가 존재하였다. B. pumilus TX703의 xylanase와 아미노산배열의 유사성이 가장 높은 xylanase는 Hordeum vulgare의 isozyme X-I이었고 본 xylanase는 208번째와 322번째에 glutamic acid 잔기를 가지고 있어 Clostridium thermocellum, Dictyoglomus thermophilum, Thermotoga neapolitana 등에서 밝혀진 바와 같이 glutamic acid 부위가 xylanase의 활성부위라 여겨진다.

• Composites Research
• /
• 제15권1호
• /
• pp.32-40
• /
• 2002

가압주조법을 이용하여 전자 패키징용 고부피분율 $SiC_p/Al$ 금속복합재료를 제조하였다. $SiC_p$ 예비성형체를 제조하기 위하여 예비성형체 금형을 고안하였으며, $Al_2O_{3f}$섬유 보강재를 $SiC_p$ 입자 보강재의 1/10비율로 첨가하고, 무기 성형제($SiO_2$)를 0.8% 이하로 사용하여 49~70 vol.% 의 예비성형체 제작에 성공하였다. 제조된 고부피분율 예비성형체로 금속용탕을 원활히 침투시키기 위해 온도, 가압력 등의 제조조건을 정하였으며, 이러한 새로이 고안된 금형조건을 FEM 열전도 해석에 도입하여 금속복합재료 제조시 몰드 내부에서 발생하는 온도변화를 분석하였다. 제조된 금속복합재료에 대해서는 충격특성 및 열팽창계수 특성평가를 실시하였다. 본 연구를 통해 제조된 금속복합재료의 충격흡수 에너지는 0.2~0.3J, 열팽창계수는 $8~10ppm/^{\circ}C$, 밀도는 $2.9~3.0g/cm^3$로 나타나 패기징 재료로서 적합한 특징을 가진 복합재료가 성공적으로 개발되었음을 확인하였다.

• 한국가금학회지
• /
• 제43권1호
• /
• pp.47-54
• /
• 2016

Coenzyme Q10(CoQ10)은 자연계에 널리 분포하는 화합물로 세포호흡과 항산화제로서 그 기능이 잘 알려졌지만, 최근 유전자들의 발현 조절자로서의 가능성도 제시되었다. 따라서 본 연구는 산란계에서 CoQ10의 첨가 급이가 콜레스테롤과 지방산 대사관련 유전자들의 발현에 미치는 영향을 관찰하고자 실시하였다. Lohmann Brown(40주령) 36수를 CoQ10의 첨가원에 따라 대조군(CON, basal diet(BD)), CoQ10 건조분말 급여군(T1, BD+CoQ10 100 mg/kg 사료) 및 CoQ10 건조분말 유화처리군(T2, BD+micellar of CoQ10 100 mg/kg 사료) 등 모두 3처리구로 설정하여 5주간 사양시험을 실시하였다. 시험 종료 후 각 개체의 간으로부터 total RNA를 추출하고, real-time PCR을 이용하여 유전자들의 발현을 분석하였다. 콜레스테롤 합성 과정에서 주요 조절 효소인 HMGCoA reductase(HMGCR)의 유전자 발현은 대조구에 비하여 CoQ10 분말첨가인 T1과 유화처리된 T2 처리구에서 모두 약 50%씩 억제되었다(p<0.05). 내생 콜레스테롤의 합성을 촉진시키는 전사인자인 SREBP2 mRNA 발현 또한 대조구와 비교해서 T1과 T2에서 각각 30%와 40% 감소하였다(p<0.05). CoQ10의 첨가 급이는 대조구에 비하여 liver X receptor(LXR) 유전자가 약 30~35% 그 발현이 억제되었으며, sterol regulatory element-binding proteins(SREBPs)1 또한 T2에서 약 40% 유전자 발현이 감소하였다(P<0.05). 전사인자인 $PPAR{\gamma}$와 XBP1은 CoQ10에 의하여 약 15~40% 수준으로 효과적으로 억제됨을 확인하였다(p<0.05). 세포 내부로의 에너지 공급원인 포도당의 흡수를 담당하는 GLUT2는 약 35~60% 그리고 GLUT8은 약 25~30%의 유전자발현 각각 감소함을 보였다(p<0.05). CoQ10의 섭취는 중성지방 합성을 위한 지방합성효소(FASN)의 유전자 발현을 분말처리군에서 약 30%, 유화처리군에서 약 65% 억제됨을 확인하였다(P<0.05). 본 연구결과는 CoQ10 첨가급여가 콜레스테롤 및 지방대사 관련 유전자 발현에 영향을 미치며, 세포내 콜레스테롤과 지방의 생성도 억제할 수 있음을 보여주었다.

• 대한수학회지
• /
• 제34권1호
• /
• pp.87-118
• /
• 1997

This paper is concerned with a mixed Lagrangian formulation of the wiscous, stationary, incompressible Navier-Stokes equations $$ (1.1) -\nu\Delta u + (u \cdot \nabla)u + \nabla_p = f in \Omega $$ and $$ (1.2) \nubla \cdot u = 0 in \Omega $$ along with inhomogeneous Dirichlet boundary conditions on a portion of the boundary $$ (1.3) u = ^{0 on \Gamma_0 _{g on \Gamma_g, $$ where $\Omega$ is a bounded open domain in $R^d, d = 2 or 3$, or with a boundary $\Gamma = \partial\Omega$, which is composed of two disjoint parts $\Gamma_0$ and $\Gamma_g$.

• 동굴
• /
• 제92호
• /
• pp.9-18
• /
• 2009

A number of closed metal mines act as point sources of contamination on nearby streams, soils and plants in our country. The contamination of twelve decomposed samples had earned from nine closed metal mines had been evaluated by TEA-3000. The contents of heavy metal with ion fraction exchange and carbonate fraction forms had been showed that the speciation of heavy metals represented with easy solubility, mobility and bioavailable of plants, and in case of sulfide compounds and organic residuals forms are related with the speciation of metals which may be stable forms because of strong bindable capacity. Also heavy metals elements in mosts of mines got with relative stable within crystal lattice, but results of trace element analyser showed that, in the most of tailings from mine areas, large portions of concentration of heavy metals were explained as stable from, sulfides/ organics and residual. In tailing from Imchun mines, the concentrations extracted by water were relatively high as compared with other mine areas whose total concentrations were very high because of large quantities of exchangeable ions and carbonates and low soil pH. Danger Index (D.I.) suggested in this study was based on the cumulative concentrations of step 1 and 2 from the result of trace element analyser. When the soil pH was considered, this index became better indicator to determine the priority for the remediation of mine area.