• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.172-180
• /
• 2013

Aramid fibers are being used increasingly in a wide range of application due to low density, high specific strength, high modulus, and high thermal resistance. But owing to its special physical and chemical structures, it is sensitive to absorb the ultraviolet light which will degrade the fiber's useful mechanical properties and structure. In this paper, the sol-gel technique was used to improve the photo-stability of p-aramid fibers. $TiO_2$, modified $SiO_2$/$TiO_2$ sol were used as coating solutions. The influence of the such coatings on the photo-stability of p-aramid fiber was investigated by an accelerated photo-ageing method using xenon lamp. The photo-stability of p-aramid fiber showed obvious improvement after the modified silica binding coating. But the amorphous $TiO_2$ sol coatings showed a negative effect. After 144h light exposure, the modified silane binder-coated fibers showed less degradation in mechanical properties with the retained tensile strength greater than about 70% of the original value.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.620-625
• /
• 2012

The sol-gel method has been widely used to synthesize the $TiO_2$ for dye sensitized solar cells and has advantages of easily fabrication process, controlling the $TiO_2$ phase and getting transparent thin-film composed of the $TiO_2$. In this paper, we synthesized the crystalline $TiO_2$ by sol-gel method controlled by the quantity ratio of Nitric acid and Ammonium hydroxide additives. The best efficiency result was obtained by 0.05 M Ammonium hydroxide and that results of Voc, Jsc, FF, and efficiency were 0.68 V, 3.28 mA/$cm_2$, 58.14 and 5.21%, respectively.

• 산업기술연구
• /
• 제28권A호
• /
• pp.19-22
• /
• 2008

In recent years, much attention has been paid to "Photocatalytic oxidation" as an alternative technique, where the pollutants are degraded by UV-irradiation in the presence of a semiconductor suspension such as titanium dioxide. $TiO_2$ is the most often used photocatalyst due to its considerable photocatalytic activity, high stability, non-environmental impact and low cost. 1n this research, the photocatalytic degradation of humic acid, acetaldehyde and methylene blue in $UV/TiO_2$ systems has been stydied. The effect of calcination temperature for manufacturing of $TiO_2$ photocatalysts and type of photocatalysts on photodegradation has been investigated. Photocatalysts with various metal ions(Mn, Fe, Cu and Pt) loading are tested to evaluate the effects of metal ions impurities on photodegradation. The photodegradation efficiency with $Pt-TiO_2$ or $Fe-TiO_2$ or $Cu-TiO_2$ is higher than Degussa P-25 powder. However, the photodegradation efficiency with $Mn-TiO_2$ is lower than Degussa P-25 powder. The photocatalytic properties of the nanocrystals were strongly dependent upon the crystallinity, particle size, standard reduction potential of various transition metal and electronegativity of various transition metal. As a result photocatalysts with various metal ion loading evaluated the effect of photodegradation.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.19-24
• /
• 2011

우리는 전기방사법을 이용하여 $TiO_2$-Ag 복합 나노선 전극을 성공적으로 합성 하였으며 그들의 전기화학적 특성 및 구조 사이의 관계를 주사전자현미경(FESEM), 투과전자현미경(TEM), X-선 회절(XRD), X-선 광전자 분광법(XPS) 및 cycler에 의하여 규명하였다. 특히 $TiO_2$-Ag 복합 나노선 전극의 전기화학 특성은 순수한 $TiO_2$ 나노선 전극 및 나노입자(P25, Degussa)와 비교하였을 때 우수한 전기화학적 결과를 얻었다. 따라서 $TiO_2$ 나노선 전극 안에 Ag nanophases의 도입은 리튬이온 배터리를 위한 나노선 전극의 수명 및 용량을 향상 시킬 수 있다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.21-26
• /
• 2001

In this study, the effects of crystalinity, composition and particle size of $TiO_2$ catalysts on the degradations of humic acid in aqueous solution was assessed using the commercially avaliable $TiO_2$ particles. Photocatalytic oxidations of humic acid (HA, Aldrich Co.) solution were carried out in case of adding different types of $TiO_2$ catalysts and their decomposition efficiencies were analyzed with respect to pH, DOC and UV absorbances values for the HA solutions and compared one another. The experimental results showed that $TiO_2$ particles(Degussa P-25) mixed with anataze and rutile gave the highest degradation efficiencies, respectively and much lower degradation efficiency in $TiO_2$ paticles of rutile only type. In comparing among ST series of anataze types, it was observed that the degradation efficiencies generally were increased with increasing $TiO_2$ contents and surface area of the particles. Higher degradation efficiency of HA was also found in zeolite type(D-TZ) of $TiO_2$ paticles compared with hydroxyapatite type (D-TH) of $TiO_2$ particles.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.634-638
• /
• 2004

Titanium silicalite-1 (TS-1) molecular sieve was produced by microwave heating of amorphous titanium-containing solid precursors after impregnation with aqueous TPAOH solution. $SiO_2-TiO_2$ xerogel, sub-micron sized $SiO_2-TiO_2$ prepared by thermal plasma process, and Ti-containing mesoporous silica, Ti-HMS, were tested as the solid phase substrates. Highly crystalline product was obtained within 30 min. after microwave irradiation with yields over 90% using $SiO_2-TiO_2$ xerogel, which showed essentially identical physicochemical properties to TS-1 prepared by conventional hydrothermal method. Excellent catalytic activity was also obtained for 1-hexene epoxidation using $H_2O_2.\;SiO_2-TiO_2$ particles prepared by thermal plasma and Ti-HMS were found inferior as a substrate for TS-1, probably due to difficulties in wetting the surface uniformly with TPAOH.

• 멤브레인
• /
• 제21권1호
• /
• pp.46-54
• /
• 2011

자연유기물을 처리하는 침지형 중공사막 정밀여과 시스템에서 $TiO_2$ 나노입자와 UV를 이용한 광촉매 반응을 적용 시 공기폭기, $TiO_2$ 농도, 용액의 pH 그리고 $Ca^{+2}$의 존재가 자연유기물에 의한 파울링에 미치는 혼합영향을 관찰하였다. 실험결과, $TiO_2$ 나노입자 없이 단순 UV의 조사만으로 자연유기물에 의한 파울링은 약 40% 정도 감소시킬 수 있었다. 또한 UV의 조사 없이 $TiO_2$ 나노입자의 교반만으로 약 25%의 파울링 감소효과를 나타내었다. 공기폭기가 광촉매 반응에 미치는 영향을 확인해 본 결과 공기폭기를 적용해 주지 않은 경우와 비교했을시 공기폭기로 인한 자연유기물의 제거효율은 약 12% 정도 향상되었다. 이는 공기폭기로 인한 분리막 표면으로부터 자연유기물의 물리적인 역수송 보다는 산소공급으로 인해 광촉매 반응이 더욱 향상된 것으로 판단된다. 공기폭기 유량, $TiO_2$ 농도, 용액의 pH 영향정도를 관찰한 결과 공기폭기가 자연유기물 파울링 감소에 미치는 영향이 가장 낮은 것으로 나타났다. 반면, 용액의 pH 경우 낮은 pH (= 4.5)에서 파울링 감소에 미치는 영향이 가장 높은 것으로 관찰되었다. 또한 $TiO_2$ 나노입자 농도가 증가할 수록 파울링 감소효과도 증가하였으며 용액의 pH를 낮출수록 파울링 감소는 증가하였다. 이는 낮은 pH에서 서로 반대전하를 지닌 자연유기물과 $TiO_2$ 나노 입자간의 정전기적인 인력이 증가하여 $TiO_2$ 나노입자 표면에서 자연유기물의 광촉매분해능이 향상된 것으로 사료된다. 또한 자연유기물 중 $Ca^{+2}$의 첨가는 상대적으로 높은 pH (= 10)에서 자연유기물과 $TiO_2$ 나노입자 사이 가교현상을 촉진시켜 $Ca^{+2}$이 첨가되지 않은 경우와 비교시 높은 파울링 감소효과와 자연유기물의 분해효과를 달성시킬 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.267-271
• /
• 1995

The electrical properties of (S $r_{0.50}$P $b_{0.25}$B $a_{0.25}$)Ti $O_{3}$ ceramics were studied. Specimens were prepared by the conventional mixed oxide method, and fired between 1300[.deg. C] - 1375[.deg. C], for 2[hr.]. The electrical and structural preperties of specimens were investigated with sintering temperature. Increasing the sintering temperature from 1300[.deg. C] to 1375[.deg. C], average grain size was increased from 2.61[.mu.m] to 4.53[.mu.m]. (S $r_{0.50}$P $b_{0.25}$B $a_{0.25}$)Ti $O_{3}$ specimen sintered at 1350[.deg. C] for two hours showed good dielectric constant(2147) and dielectric loss(1.7[%]) properties at 1[khz]. Sintered density and breakdown field strength were the highest value of 5.75[g/c $m^{3}$], 20[kV/cm], respectively. Dielectric properties with applied voltage were independent of the sintering temperature.temperature.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.475-479
• /
• 2004

$TiO_2$ thin films were grown on Si (100) substrates by atomic layer deposition using $[Ti(OPr^i )_2(dmae)_2]$ and water as precursors. The thickness, chemical composition, crystalline structure, and morphology of the deposited films were investigated by transmission electron microscopy, UV spectrometry, X-ray photoelectron pectroscopy, X-ray diffraction, and atomic force microscopy. The results show that $TiO_2$ ALD using $[Ti(OPr^i )_2(dmae)_2]$ as a precursor is self-controlled at temperatures of 100-300$^{\circ}C$. At the growth temperatures below 300$^{\circ}C$, the surface morphology of the $TiO_2$ films is smooth and uniform. The $TiO_2$ film was grown with a preferred orientation toward the [101] direction at 400$^{\circ}C$.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.98-101
• /
• 2007

Yttrium(Y)-substituted bismuth titanate $(Bi_{4-x},Y_x)Ti_3O_{12}$ [x=0, 0.25, 0.5, 0.75, 1](BYT) thin films were deposited using an RF sputtering method on the $Pt/TiO_2/SiO_2/Si$ substrates. The structural properties and electrical properties of yttrium-substituted $(Bi_4-xYx)Ti_3O_{12}$ thin films were analyzed. The remanent polarization of $(Bi_4-xYx)Ti_3O_{12}$ films increased with increasing Y-content. The $(Bi_{3.25}Y_{0.75})Ti_3O_{12}$ films fabricated using a top Au electrode showed saturated polarization-electric field(P-E) switching curves with a remanent polarization(Pr) of $8{\mu}C/cm^2$ and coercive field (Ec) of 53 kV/cm at an applied voltage of 7 V. The $(Bi_{3.25}Y_{0.75})Ti_3O_{12}$ films exhibited fatigue-free behavior up to $4.5{\times}10^{11}$ read/write switching cycles at a frequency of 1MHz.