• Journal of Animal Science and Technology
• /
• 제46권6호
• /
• pp.917-924
• /
• 2004

미토콘드리아 ND2 유전자와 세 가지 tRNA (tRNA-M앙, tRNA-Trp, tRNA-Ala)들이 포함}는 mtDNA 절펀의 PCR-RFLP haplotyping 기법으로 제주도에서 사육하는 한국 재래돼지를 포함하는 5개 품종에 대한 유전적 다양성을 조사하였다. 몇몇 돼지 품종에서 mtDNA 상의 제한절편 길이의 다형성이 관찰되었다. HaeIll-와 Hinf1RFLP에서는 두 가지 제한절편 유형, Tsp509IRFLP에서는 네 가지 유형으로 각각 구분되었다. 발견된 제한절편 유형들을 조협하여 mtDNA haplotype으로 구분했을 때, 모두 네 가지 haplotype들이 발견되었고 집단에 따라 각기 다른빈도를 나타내였다. 하나의 동일한 haplotype mtWB가 한반도 야생멧돼지와 Large White 집단에서 관찰되었다. Duroc과 Landrace 품종들은 여러 모계 선조에서 유래되었을 것으로 추정되는 두 가지의 haplotype들을 가지고 있었다. 제주도에서 사육되고 있는 한국재래돼지 집단에서는 muD와 mtJN haplonpe들이 관찰되었는데, 이 중 mtJN은 빈도가 높고 집단 특이적이었다. 본 연구의 결과는 제주 돼지 집단의 형성에 적어도 둘 이상의 모계 선조가 참여했으며, 이후 동아시아 언근 돼지 품종들과의 인위적인 교잡아 이루어졌을 것으로 추정된다. 연구진의 예상과는 달리 한반도 야생멧돼지가 제주 재래돼지 집단의 모계 선조라는 증거는 확인되지 않았다. MtDNA haplotype과 돼지 계통간의 관계 에서의 특이성은 돼지 육종에 있어 모계 확인과 계보 구성에 매우 유용한 정보를 제공할 것으로 사료된다.

• 생물환경조절학회지
• /
• 제27권4호
• /
• pp.302-311
• /
• 2018

3종의 일반토마토 '대프니스', '도태랑다이아', '마스카라'를 대목 'B블로킹'에 접목하고 접목 활착 후 10일부터 10일 간격으로 40일 까지 육묘용 표준양액(S)의 0.5S, 1,0S, 2,0S 로 시비수준 처리를 하였다. 각 시기별로 묘의 생육인자들을 조사하였고, 묘소질 지표인 TR율, 충실도, DQI를 계산하였다. 그리고 생육인자들과 묘소질 지표와의 상관관계를 분석하였고, 묘령별로 야간온도를 10, 15, $25^{\circ}C$를 목표로 3수준으로 처리하여 상대생장률(RGR)을 분석하였다. 그 결과, 토마토 접목묘의 양적인 생육인자들은 모두 시비농도가 높을수록 증가하였고, 다양한 크기 범위의 묘를 생산할 수 있었다. 그리고 묘의 바이오메스 관련 생육인자가 충실도와 DQI에 높은 정의상관이 있음을 알 수 있었으며, 충실도와 DQI의 고도로 유의한 1차 선형회귀식(($Y=-0.0256+0.0029^*X$, Adj $R^2=0.9480$, p<0.0001)이 도출되었다. 정식 후 2주간의 RGR은 묘령이 높아질수록 감소하는 경향을 보였고, 육묘기 시비수준에 따라서는 접목활착 후 30일묘와 40일묘에서 표준 시비수준 1.0S에서 RGR이 높았다. 시비수준별 육묘기 DQI와 정식후 초기 RGR과 유의한 선형회귀식을 도출하였으며, 표준 시비수준 1.0S에서 DQI가 높아짐에 따라 RGR이 높게 유지되었다. 이러한 결과는 DQI가 원통형 종이포트 토마토 접목묘의 묘소질의 지표로 이용될 수 있고, DQI와 정식 후 초기 상대생장률과의 관계분석을 통하여 우량묘의 기준 설정에 활용될 수 있을 것이다.

• 한국발생생물학회지:발생과생식
• /
• 제12권3호
• /
• pp.289-296
• /
• 2008

BPES($\underline{B}$lepharophimosis/$\underline{P}$tosis/$\underline{E}$picanthus inversus $\underline{S}$yndrome)는 FOXL2 유전자의 돌연변이에 의해 유발되는 상염색체 우성질환이다. 눈꺼풀이 갈라지거나 쳐지고 넓은 미간이 나타나는 특징이 있으며, 여성의 조기 난소 부전증(premature ovarian failure, POF)을 일으켜 불임을 유발한다. FOXL2는 forkhead family에 속하는 전사인자로서 FOXL2가 결여된 난소에서는 granulosa cell의 분화가 진행되지 않아 난포 성숙과정의 멈춤과 난자의 폐쇄증을 유발한다. FOXL2를 bait로 하여 rat의 난소 cDNA 라이브러리의 yeast two-hybrid screening을 시행하여 FOXL2 단백질과 상호작용을 하는 small ubiquitin-related modifier(SUMO)-conjugating E2 효소인 UBE2I 단백질을 찾았다. UBC9이라고도 알려진 UBE2I 단백질은 SUMO 변형 과정을 위한 필수적인 단백질이다. Sumoylation은 수 많은 전사인자의 전사능력의 조절을 포함하여 다양한 신호전달체계에 관여하는 번역 후 변형 과정이다. 본 연구에서 인간세포인 293T 내에서 면역침전반응 실험을 통해 FOXL2와 UBE2I의 단백질-단백질간의 상호작용을 확인하고, FOXL2의 돌연변이형을 제작하여 yeast two-hybrid system을 이용해 UBE2I와 결합에 필요한 FOXL2의 부분을 규명하였다. 따라서, FOX2에 상호작용하는 UBE2I의 규명은 sumoylation에 의한 FOXL2의 새로운 조절 메커니즘을 시사한다.

• 한국가축번식학회지
• /
• 제24권1호
• /
• pp.49-57
• /
• 2000

본 연구는 소 태아섬유아세포를 이용하여 핵이식 후 세포의 휴면처리, 세포의 passage 수 및 세포의 기원이 복제란의 발육에 미치는 영향을 검토하였다.3.57개 월령 한우 수컷 태아의 피부 및 간 조직에서 세포를 채취하여 체외에서 4∼6 회 계대배양 후 동결하였다가 핵이식에 사용하였다. 세포는 핵이식 전에 혈청기아처리를 하였으며, 대조구로는 활발히 분열 중의 무처리 세포를 사용하였다. Donor 세포는 미수정란의 탈핵세포질에 이식 후 전기융합 및 활성화를 실시하였고, 재구축배는 7∼9 일간 체외배양하여 발육농을 검토하였다. 배반포로 발육된 일부 복제란은 발정 7∼8 일째의 수란우에 이식하였다. 복제란의 배반포 발육율은 혈청기아 처리구 (25.3%)가 무처리구 (15.9%)에 비하여 유의적으로 높았으나 (P＜0.05), 세포의 passage 수 (4∼6회) 에 관계없이 23.1∼25.0%로 나타났고, 피부 및 간유래 복제란의 배반포 발육율도 23.8∼25.2% 로 두 조직세포 간에 차이가 없었다. 복제란의 이식 후 60일 및 120일에 수란우의 34.4% 및 15.6%가 각각 임신이 확인되었으며, 초자화동결된 태아 피부세포 복제란으로부터 1두의 수컷 송아지가 생산되었다. 본 연구의 결과는 복제란의 체외발육능이 세포의 휴면처리에 의하여 향상되었으나, 세포의 passage 수 (4∼6 회) 및 세포의 두 기원 (피부 및 간) 에 의해서는 영향을 받지 않으며, 태아 피부세포 유래 복제란으로부터 산자가 생산될 수 있음을 확증한다.

• 농업생명과학연구
• /
• 제50권3호
• /
• pp.119-127
• /
• 2016

본 연구는 현재 우리나라에서 이뤄지고 있는 차량소독방법의 미흡한 점을 개선하여 국내 축산농가에서 지속적으로 발생하고 있는 각종 전염병을 차단할 수 있는 소독시스템을 개발하는데 필요한 노즐형태와 동력분무기의 적정토출압력을 구명하기 위해 실시되었다. 실험은 2012년 1월 10일부터 2012년 2월 28일까지 진행되었고, 모든 성능실험은 5회 반복으로 측정하였으며, 실험대상은 A사, B사, C사의 제품을 사용했다. 각 회사별 제품에 대해 분무량, 분무각, 피복면적비, 노즐별 분무압력을 측정한 결과, 분무량, 분무각, 피복면적비는 분무기 토출압력이 증가함에 따라 증가하였다(p<0.05). 위 결과와 각 제품의 노즐 위치별 분무량, 분무각, 피복면적비를 측정한 결과를 종합해봤을 때, 노즐의 형태는 부채꼴형 노즐 보다 원추형 노즐의 성능이 우수한 것으로 판단되었으며, 피복면적비를 고려했을 때 분무기의 적정토출압력은 20kg/㎠ 정도면 충분할 것으로 판단되었다.

• 한국유통학회지:유통연구
• /
• 제15권1호
• /
• pp.49-71
• /
• 2010

본 연구는 가맹사업자의 자기효능감에 주목하여 정부가 예비가맹사업자들을 보호하기 위해 가맹본부에 다양한 규제와 정책을 사용하는 것이 최선의 방법이 아니라는 것에 관심을 두고 있다. 본 연구에서는 경로-목표이론(path-goal theory)에서 제시한 가맹본부의 리더십 행동 유형과 가맹사업자의 관계결속의 영향관계에 있어서 가맹사업자의 특성으로 자기효능감의 조절효과를 규명하고, 실증 분석한 결과 다음과 같은 연구의 시사점을 발견할 수 있었다. 첫째, 가맹본부의 리더십 행동유형이 관계결속에 긍정적 효과를 가져 온다는 사실이 확인됨으로써 가맹본부는 가맹사업자에게 맞는 리더십 행동유형을 적용할 수 있도록 하여야 한다. 둘째, 가맹사업자의 자기효능감이 관계결속에 긍정적 효과가 있을 뿐만 아니라, 리더십 행동유형과 관계결속 사이에 상당한 조절효과가 있기 때문에 가맹본부는 가맹사업자들의 개인차(individual difference) 관리가 필요하다. 셋째, 정부는 가맹본부를 규제할 것만이 아니라 가맹본부가 가맹사업자들의 특성을 확실하게 파악하고 기업의 목표달성을 위한 정당한 통제가 가능하도록 제도적 지원을 해야 할 것이다.

• 한국작물학회지
• /
• 제11권
• /
• pp.81-97
• /
• 1972

논벼농사의 노동력을 덜기 위하여 이중 가장 중요한 호미질에 의한 중경제초의 노력을 살초제에 의한 것으로 전환시키고자 기초적인 면과 실제적인 면으로 시험조사를 하였다. 건국대학교에서 1m평방 안높이 21cm 및 36cm의 두 형의 concrete tank를 각 4개씩 만들고 그 안에 채수관장치를 한 뒤 양토작토로 논벼를 심어 수도물로 관수하고 투수속도와 산소침투 정도와 수량과의 관계를 보았다. 농림부 자재 검사소 내에서 투수가 심한 사질답전포장에 전면적으로 살초제 Stam F-34를 살포하여 제초하고 제 1구는 중경을 하지 않고, 제 2구는 중경 1회, 그리고 제 3구는 중경 2회하여 중경의 효과를 비교하였다. 이리 호남시험장내 건답보통논과 습답에 무중경, 중경 1회 중경 2회의 구와 살초제 Pamcon을 살포한 것들 중, 무중경, 중경 1회 제초 2회, 중경 2회 제초 1회, 중경 3회 제초 2회의 구와 그리고 관행구를 설치하여 중경제초의 비용과 살초제에 의한 비용을 비교하였던바 그 결과를 요약하면 다음과 같다. (1) 투수속도와 산소침투와 수량과의 관계는 일당(24시간당) 투수속도 4cm이상 될 때 지표 2cm하에 산소가 조금 들어가며 3cm보다 적을 때는 산소가 지표하의 매우 옅은 층에만 내려가는 것으로 나타나며 그리고 경심 15cm구에는 일당 투수속도의 0cm(무투수) 1.5cm에서 수량이 많고 2.5cm와 3.4cm에는 감수되며, 경심 30cm구에는 투수속도 1.5cm 및 30cm구에서 수량이 많고 무투수와 투수속도 4cm구에는 수량이 떨어졌다. (2) 투수가 심한 농림부 자재검사소 사질토양에서는 중경의 효과가 없었다. (3) 호남작물시험장내 건답에서는 살초제 Pamcon 처리 무중경구 수량에 대해서 유의성이 보이는 증수구는 없었다. 그리고 습답에서는 무중경구에 있어서 중경제초 및 관행구가 유의성 있게 증수되었다. (4) 논매기 호미질에 의한 10a당 노동력은 정미 37.1시간 식사와 휴식시간 포함하여 53.5시간이고, 노임은 2,346원인데 대하여 살초제 사용에의 한제 초노력은 수동식으로 0.5일 즉 약 5시간 제비용과 감수추정량을 추정할 때 1,130원이고 습답을 제외하면 750원이 되는 것으로 추정 되었다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1051-1054
• /
• 1993

The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.

• 한국미생물·생명공학회지
• /
• 제46권4호
• /
• pp.360-371
• /
• 2018

1. Agar diffusion test를 통해 지모 뿌리 추출물의 항균활성 확인 결과 호기성 그람 양성 균주인 S. aureus에서 추출물 및 모든 분획물에서 저해환을 나타내었고, 에틸아세테이트 분획물이 대조군으로 사용된 메틸파라벤보다 더 높은 항균활성을 나타내었다. 2. 최소저해농도(MIC)와 최소사멸농도(MBC/MFC)를 통해 더 정확한 지모 뿌리 추출물의 항균활성을 확인하고자 하였다. 그 결과 곰팡이균인 A. niger를 제외한 모든 균주에서 MIC 농도를 확인하였고, 특히 호기성 그람 양성 균주인 S. aureus와 호기성 그람 음성 균주인 P. aeruginosa 그리고 진균인 C. albicans에서 에틸아세테이트 분획과 아글리콘 분획물이 낮은 농도에서 각 균주를 저해하는 것을 확인하였다. 3. DPPH법을 통해 지모 뿌리 추출물의 자유 라디칼 소거활성($FSC_{50}$)을 확인한 결과 가장 높은 활성을 나타낸 것은 에틸아세테이트 분획물($23.19{\mu}g/ml$)이고 아글리콘 분획물($71.06{\mu}g/ml$), 50% 에탄올 추출물($146.2{\mu}g/ml$) 순서로 나타났다. 4. 지모 뿌리 추출물의 총 항산화능($OSC_{50}$)을 확인하기 위해 luminol 발광법을 통해 확인하였다. 실험 결과 에틸아세테이트 분획물($1.5{\mu}g/ml$)과 아글리콘 분획물($1.4{\mu}g/ml$)이 대조군으로 사용된 L-ascorbic acid ($1.3{\mu}g/ml$)과 비슷한 활성을 나타내며 높은 총 항산화능을 나타내었다. 또한 에틸아세테이트 분획물이 50% 에탄올 추출물보다 약 11배 더 높은 활성을 띄는 것을 확인하였다. 5. $^1O_2$으로 유도된 세포 파괴에 대한 세포보호 효과(${\tau}_{50}$)를 확인한 결과 지모 뿌리 추출물과 분획물 모두 농도의존적으로 세포보호효과를 나타내었다. 50% 에탄올 추출물은 $8{\mu}g/ml$의 농도(34.5 min)에서, 에틸아세테이트 분획물은 $4{\mu}g/ml$의 농도(64.4 min)에서, 아글리콘 분획물은 $8{\mu}g/ml$의 농도(215.9 min)에서 가장 높은 보호효과를 나타냄을 확인하였다. 6. 지모 뿌리 추출물의 HaCaT 세포독성평가를 진행한 결과, 본 실험에서는 $0.02-2{\mu}g/ml$로 농도를 설정하여 세포보호실험을 진행하였다. 7. 과산화수소로 유도된 세포 손상에 대한 세포 보호 효과를 확인한 결과, 50% 에탄올 추출물과 에틸아세테이트 분획물 및 아글리콘 분획물의 최대 생존율은 각각 86.23, 86.59 및 89.70%를 나타냈으며 과산화수소를 처리한 양성 대조군에 비하여 세포 생존율을 각각 8.07, 8.42 및 11.53% 증가시켰다. 8. HaCaT세포에 UVB를 조사하여 세포 내 ROS 소거활성 평가를 진행한 결과, 자외선으로 유도된 세포 손상에서 아글리콘 분획물은 $2{\mu}g/ml$ 농도에서 UVB를 처리한 양성 대조군 대비 41.77%까지 세포내 ROS를 감소시켰다. 9. 실험을 통해 높은 생리활성을 나타낸 지모 뿌리 에틸아세테이트 분획물을 TLC 및 LS/ESI-MS를 통해 성분분석을 진행하였다. 그 결과 mangiferin, isomangiferin, timosaponin-A-III, nyasol을 확인하였다.본 연구의 결과를 통해 지모 뿌리 추출물의 항균 및 항산화 작용과 더불어 세포보호효과를 통해 천연 화장품 소재로서의 응용 가능성이 있음을 확인하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.