• 한국재료학회지
• /
• 제26권4호
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.34-39
• /
• 1995

we have studied the possibility of n-type doping in diamond and DLC films. After ion doping of either p-type or n-type, the electrical conductivities were remarkably increased and conductivity activation energies were decreased. The Raman intensity at 1330 cm-1 decreases slightly by ion doping of $7.2\times 10^{16}\; \textrm{cm}^{-2}$. The increase in conductivity by ion doping appears to be arised from the combined effects by substitutional doping and graphitization by ion damage.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.115-121
• /
• 2017

In this work, p-type Bi-Sb-Te alloys powders are prepared using gas atomization, a mass production powder preparation method involving rapid solidification. To study the effect of the sintering temperature on the microstructure and thermoelectric properties, gas-atomized powders are consolidated at different temperatures (623, 703, and 743 K) using spark plasma sintering. The crystal structures of the gas-atomized powders and sintered bulks are identified using an X-ray diffraction technique. Texture analysis by electron backscatter diffraction reveals that the grains are randomly oriented in the entire matrix, and no preferred orientation in any unique direction is observed. The hardness values decrease with increasing sintering temperature owing to a decrease in grain size. The conductivity increases gradually with increasing sintering temperature, whereas the Seebeck coefficient decreases owing to increases in the carrier mobility with grain size. The lowest thermal conductivity is obtained for the bulk sintered at a low temperature (603 K), mainly because of its fine-grained microstructure. A peak ZT of 1.06 is achieved for the sample sintered at 703 K owing to its moderate electrical conductivity and sustainable thermal conductivity.

• Transactions on Electrical and Electronic Materials
• /
• 제13권4호
• /
• pp.192-195
• /
• 2012

We reported diborane ($B_2H_6$) doped wide bandgap hydrogenated amorphous silicon oxide (p-type a-SiOx:H) films prepared by using silane ($SiH_4$) hydrogen ($H_2$) and nitrous oxide ($N_2O$) in a radio frequency (RF) plasma enhanced chemical vapor deposition (PECVD) system. We improved the $E_{opt}$ and conductivity of p-type a-SiOx:H films with various $N_2O$ and $B_2H_6$ ratios and applied those films in regards to the a-Si thin film solar cells. For the single layer p-type a-SiOx:H films, we achieved an optical band gap energy ($E_{opt}$) of 1.91 and 1.99 eV, electrical conductivity of approximately $10^{-7}$ S/cm and activation energy ($E_a$) of 0.57 to 0.52 eV with various $N_2O$ and $B_2H_6$ ratios. We applied those films for the a-Si thin film solar cell and the current-voltage characteristics are as given as: $V_{oc}$ = 853 and 842 mV, $J_{sc}$ = 13.87 and 15.13 $mA/cm^2$. FF = 0.645 and 0.656 and ${\eta}$ = 7.54 and 8.36% with $B_2H_6$ ratios of 0.5 and 1% respectively.

• 지질공학
• /
• 제20권2호
• /
• pp.203-212
• /
• 2010

본 연구는 연구지역의 수리상수를 추정하여 오염된 지하수의 정화공법 설계에 효과적으로 사용하는데 목적이 있다. 이를 위하여 수행된 수리시험은 순간수위변화시험, 단공양수시험 및 단계양수시험이다. 순간수위변화시험은 대표적인 Bouwer and Rice 직선법과 C-B-P 특성곡선법(type curve)으로 해석하였다. Bouwer and Rice법으로 해석한 평균 수리전도도 값은 $4.48{\times}10^{-3}cm/sec$ 이며 중앙값은 $1.16{\times}10^{-3}cm/sec$이다. C-B-P법으로 구한 평균 수리전도도 값은 $2.37{\times}10^{-3}cm/sec$이며 중앙값은 $7.09{\times}10^{-4}cm/sec$이다. 두 해석 결과 연구지역의 하부가 화강암으로 이루어져 있어 대체로 투수성이 낮아 Bouwer and Rice법으로 해석한 수리전도도가 높게 나타난다. 단공양수시험은 GW7, GW12 및 MW9 관정에서 수행하였으며 여러 종류의 특성곡선법을 적용하여 해석하였다. GW7 관정은 GW12 및 MW9 관정보다 수리전도도 및 투수량 계수가 낮으며 이는 기반암의 파쇄대 및 절리의 여부와 관련된 것으로 판단된다. 단계양수시험은 KDPW1 및 KDPW2 관정에서 수행하였으며 해석방법에 따라 수리상수 값의 차이가 나타나지만 매우 미미하며 본 연구에서 해석한 수리상수 값은 오염지하수 정화설계에 있어 적절히 활용될 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.495-499
• /
• 2020

Power factor improvement at high temperatures has been a major research topic for the development of skutterudite thermoelectric materials. Here, we attempted to optimize the process parameters for manufacturing skutterudite materials, especially for p-type systems. We focused on the effect of aging time variation to maximize the high-temperature performance of the Ce-filled Fe³CoSb¹² skutterudite system. The optimized aging time was concluded to be a key parameter for the formation of single-phase nanostructures in this p-type skutterudite system. The optimized condition was effective in reducing the bipolar effect at high temperature ranges by increasing the carrier concentration in the p-type system. To confirm the conclusions, the electrical conductivity, Seebeck coefficient, and power factor were measured. The results matched well with the microstructure and with those of an XRD analysis performed for the system.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.900-904
• /
• 1992

High temperature electrical conductivity was measured for perovskite La0.98Sr0.02MnO3 at 200~130$0^{\circ}C$ as a function of Po2 and 1/T. Perovskite La1-xSrxMnO3 system is the typical oxygen electrode in solid oxide fuel cell (SOFC). Acetate precursors were used for the preparation of mixed water solution and the calcined powders were reacted with Na2CO3 flux in order to obtain highly reactive powders of perovskite La0.98Sr0.02MnO3. The relative density was greatly increased above 90% because of the homogeneous sintering. From the conductivity ($\sigma$)-temperature and conductivity-Po2 at constant temperature, the defect structure of La0.98Sr0.02MnO3 was discussed. From the slope of 1n($\sigma$) vs 1/T, the activation energy of 0.069 and 0.108eV were evaluated for above 40$0^{\circ}C$, respectively. From the relationship between $\sigma$ and Po2, it was found that the decomposition of La0.98Sr0.02MnO3 was occurred at 10-15.5 atm(97$0^{\circ}C$) and 10-11 atm(125$0^{\circ}C$). It is supposed that the improvement of p-type conductivity may be leaded by the increase of Mn4+ concentration through the substitution of divalent/monovalent cations for La site in LaMnO3.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.47-53
• /
• 2010

Ceramics with perovskite-type structure are interesting functional materials for several energy conversion processes due to their flexible structure and a variety of properties. Prominent examples are electrode materials in fuel cells and batteries, thermoelectric converters, piezoelectrics, and photocatalysts. The very attractive physical-chemical properties of perovskite-type phases can be modified in a controlled way by changing the composition and crystallographic structure in tailor-made soft chemistry synthesis processes. Improved thermoelectric materials such as cobaltates with p-type conductivity and n-type manganates are developed by following theoretical predictions and tested to be applied in oxidic thermoelectric converters.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3225-3227
• /
• 2010

The thermal conductivity of layered metal chalcogenides such as $MT_2$ (M = Mo, W; T = S, Se) shows a marked decrease after exfoliation and subsequent restacking process. Random stacking of two-dimensional crystalline sheets circumvents thermal conduction pathways along a longitudinal direction, which results in a reduction in thermal conductivity. $WS_2$ and $WSe_2$ compounds retain p-type conducting behavior after exfoliation and restacking with decreased electrical conductivity due to the change in carrier concentration. $MoSe_2$ compound exhibits metallic behavior < $130^{\circ}C$ with a small Seebeck coefficient, which results from metastable 1T-$MoSe_2$ structure of the restacked phase.

• 한국진공학회지
• /
• 제6권1호
• /
• pp.69-76
• /
• 1997

순간 증착법으로 $Bi_{0.5}Sb_{1.5}Te_3$(p형)와 $Bi_2Te_{2.4} Se_{0.6}$(n형) 박막을 제조하여 두께와 어닐 링 조건에 따른 Seebeck 계수, 전기전도도, carrier 농도 및 이동도, 열전도도, 성능지수의 변화 등 열-전기적 특성을 조사하였다. 473K에서, 1시간 진공 열처리한 결과 p형과 n형의 성능지구는 각각 $1.3{\times}10^{-3}K^{-1}$ 및 $0.3{\times}10^{-3}K^{-1}$으로 향상되었으며 두께에 크게 의존하지 않았 다. 이런 성질을 갖는 열전 박막을 소자화한 박막 온도 센서를 유리와 Teflon기판 위에 제 조하였으며, 이들의 온도 변화에 대한 열기전력, 민감도 및 시간 상수 등 센서 특성을 측정 하였다. p 및 n형의 leg 폭 1mm$\times$길이 16mm인 박막 온도 센서의 경우, Teflon 기판일 때 좋은 성능을 나타내었으며, 민감도는 2.91V/W, 시간 상수는 28.2초이었다.