• Laser Solutions
• /
• v.10 no.4
• /
• pp.13-17
• /
• 2007

Electron beam weldability was investigated for 1mm thick cold rolled sheets of commercially pure grade titanium and Ti-6Al-4V alloy. Accelerating voltage of 40kV, beam current of 6mA, and weld speed of 0.8m/min was used and focal position of focused electron beam was just on the surface of workpiece. Microstructure of weld metal, the heat affected zone and base metal was observed using optical microscope. Vickers hardness was measured across the welds and the transverse tensile test was carried out. Hydroformability test was also carried out for the butt welded coupons of commercially pure grade titanium. For the electron beam welded C P Ti, the average grain size was equiaxed $\alpha(15{\sim}25{\mu}m)$ for base metal, coarse equiaxed $\alpha(80{\sim}200{\mu}m)$ for weld metal and annealed and enlarged grain($40{\sim}120{\mu}m$) for the HAZ. The vickers hardness of C P Ti was $180{\sim}200Hv$ for base metal, and $160{\sim}180Hv$ for the weld metal and the HAZ. For the electron beam welded Ti-6Al-4V alloy, the vickers hardness was 360Hv for the base metal, abd $400{\sim}425Hv$ for the weld metal and the HAZ. All the failure occurred at the base metal, when the transverse weld tensile test was carried out for both electron beam welded C P Ti and Ti-6Al-4V alloy. The formability of electron beam welded C P Ti was decreased compared with that of C P Ti base alloy.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.39-45
• /
• 2007

Optimum condition for neutralization has been studied to remove the copper and zinc ions from spent sulfate solutions which resulted from the acid washing of the base of brass bulb. Chemical distribution of copper and zinc species and the variation of solubility of the two ions with solution pH were obtained by considering the complex formation reaction and mass balance. Removal percentage of zinc was more sensitive to solution pH than that of copper. This results from the fact that the solubility of zinc is higher than that of copper. The form of coagulant affected little the removal percentage of zinc, while addition of coagulant as the phase of solution resulted in higher removal percentage of copper than as the phase of solid.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.3
• /
• pp.115-120
• /
• 2007

Reliability between passivated and unpassivated process with the base-exposed InGaP/GaAs HBTs was studied. A passivation of HBT was attempted by $SiO_2$ thin film deposition at $300^{\circ}C$ by means of PECVD. Base-exposed InGaP/GaAs HBTs before and after passivation were investigated and compared in terms of DC and RF performance. Over a total period of 30 days, passivated HBTs show only 2% degradation of DC current gain for the high current density of $40KA/cm^2$. The measured thermal resistance of $2{\times}30{\mu}m^2$ single emitter InGaP/GaAs HBT passivated with PECVD $SiO_2$ devices can be extracted and was founded to be 1430 K/W. The estimated MTTF was $2{\times}10^7hr\;at\;T_j=125^{\circ}C$ with an activation energy $(E_a)$ of 1.37 eV.

• Journal of KIISE
• /
• v.44 no.8
• /
• pp.854-859
• /
• 2017

Caching popular videos in the storage of base stations is an efficient method to reduce the transmission latency. This paper proposes an incentive proactive cache mechanism in the wireless network to motivate the content providers (CPs) to participate in the caching procedure. The system consists of one/many Infrastructure Provider (InP) and many CPs. The InP aims to define the price it charges the CPs to maximize its revenue while the CPs compete to determine the number of files they cache at the InP's base stations (BSs). We conceive this system within the framework of Stackelberg game where InP is considered as the leader and CPs are the followers. By using backward induction, we show closed form of the amount of cache space that each CP renting on each base station and then solve the optimization problem to calculate the price that InP leases each CP. This is different from the existing works in that we consider the non-uniform pricing scheme. The numerical results show that InP's profit in the proposed scheme is higher than in the uniform pricing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.621-632
• /
• 2007

Statement of problem: The failure of adhesion between the resilient denture liner and the denture base is a serious problem in clinic. Purpose: The purpose of this study was to evaluate the effect of denture base resin surface pretreatments (mechanical and/or chemical) on the tensile bond strength between a resilient liner and processed denture resin. Material and method. Acrylic-based resilient liners (Soft liner; GC co., Japan & Coe-Soft; GC America Inc. USA) and silicone-based resilient liners (Mucosoft, Parkell Inc., USA & Dentusil; Bosworth co., USA) were used. Specimens in each soft lining material were divided two groups with or without mechanical pretreatment. Each denture base specimen received 1 of 4 chemical pretreatments including: (1) no treatment, (2) 30-s acetone treatment, (3) 15-s methylene chloride treatment, (4) 180-s methyl methacrylate treatment. All specimens were thermocycled and placed under tension until failure in a universal testing machine. Results: 1. Silicone-based resilient liners exhibited significantly higher tensile bond strengths than acrylic-based resilient liners (P<.05). 2. Grinding the denture base resin improved tensile bond strengths of silicone-based resilient liners, but reduced tensile bond strengths of acrylic-based resilient liners (P<.05). 3. In acrylic-based resilient liners, treating with acetone significantly increased the bond strength of Soft liner and treating with methyl methacrylate significantly increased the bond strength of Coe-Soft (P<.05). However they were not effective compared to silicone-based resilient liner. 4. In silicone-based resilient liners, treating with all chemical etchants significantly increased the bond strength of Mucosoft to denture base, and treating with methylene chloride and methyl methacrylate increased the bond strength of Dentusil to denture base (P<.05). Conclusion: Although chemical and mechanical pretreatments were not effective on tensile bond strength of acrylic-based resilent liner to denture base, treating the denture base resin surface with appropriate chemical etchants after mechanical pretreatment significantly increased the tensile bond strength of silicone-based resilient liner to denture base.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.75-82
• /
• 2008

In order to establish environmentally friendly phosphorus(P) and potassium(K) fertilizer application rates for rice cultivation in Korea, a field experiment was conducted in two different characterized paddy soils, higher and lower P and K content in soil from 2005 to 2006 in Suwon, Korea. Chuchong which is typical rice variety in Korea, was selected for experiment. Rice yields in base P-K fertilizer level ($30-30kg\;ha^{-1}$) and no P-K fertilizer level were 97~98% and 93~97% of standard P-K fertilizer level ($45-57kg\;ha^{-1}$), respectively. At the lower content of P and K in immatured paddy soil, the yield of no P plot was decreased by 7% compared to that of standard P-K plot. Significant difference in rice yield and yield characteristics was found neither in standard P-K fertilization plot nor in base P-K fertilization plot. There was no significant difference in P and K uptake at the harvest stage between standard P-K fertilizer plot and base P-K fertilizer plot. Phosphorus and K uptake was slightly decreased in no fertilizer plots compared to standard fertilizer plot. Phosphorus and K use efficiency of rice plant in base fertilizer plot was higher than that in standard fertilizer plot. Available phosphorus and exchangeable potassium content in soil at the harvest stage were increased in both standard and base fertilizer plot. But no significant difference of P and K content in ? was found between standard fertilizer plot and base fertilizer plot. Rice quality characteristics such as proportion of brewers rice, damaged kernel, broken rice, and content of amylose and protein were lowered in the base fertilizer plot than the standard fertilized plot, while the proportion of perfect kernel increased in the base fertilizer plot From the results, we generally recommend the base P-K fertilization ($30-30kg\;ha^{-1}$) instead of standard P-K fertilization ($45-57kg\;ha^{-1}$) for rice cultivation in Korea.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.225-234
• /
• 2015

In this study, we proposed to synthesize thermally stable, soluble and conjugated Schiff base polymer (SbP). For this reason, a specific molecule namely 4,4'-thiodiphenol which has sulfur and oxygen bridge in its structure was used to synthesize bi-functional monomers. Bi-functional amino and carbonyl monomers namely 4,4'-[thio-bis(4,1-phenyleneoxy)] dianiline (DIA) and 4,4'-[thiobis(4,1-phenyleneoxy)]dibenzaldehyde (DIB) were prepared from the elimination reaction of 4,4'-thiodiphenol with 4-iodonitrobenzene and 4-iodobenzaldehyde, respectively. The structures of products were confirmed by elemental analysis, FTIR, $^1H$ NMR and $^{13}C$ NMR techniques. The molecular weight distribution parameters of SbP were determined by size exclusion chromatography (SEC). The synthesized SbP was characterized by solubility tests, TG-DTA and DSC. Also, conductivity values of SbP and SbP-iodine complex were determined from their solid conductivity measurements. The conductivity measurements of doped and undoped SbP were carried out by Keithley 2400 electrometer at room temperature and atmospheric pressure, which were calculated via four-point probe technique. When iodine was used as a doping agent, the conductivity of SbP was observed to be increased. Optical band gap ($E_g$) of SbP was also calculated by using UV-Vis spectroscopy. It should be stressed that SbP was a semiconductor which had a potential in electronic and optoelectronic applications, with fairly low band gap. SbP was found to be thermally stable up to $300^{\circ}C$. The char of SbP was observed 29.86% at $1000^{\circ}C$.

• Journal of the Korean Society for information Management
• /
• v.19 no.1
• /
• pp.47-69
• /
• 2002

The concept based retrieval model has shown a higher performance than those of the simple matching function method or the P-norm retrieval method introduced to compensate the demerits of the Boolean retrieval model. However. it takes too long to create a semantic-net knowledge base, which is essential in concept exploration. In order to solve such demerits. a method was sought out by creating a distributed knowledge base by subjects to reduce construction time without hindering the performance of retrieval.

• International Journal of Stem Cells
• /
• v.16 no.2
• /
• pp.202-214
• /
• 2023

Background and Objectives: To investigate the role of exosomes from periodontal ligament cells (PDLCs) in bone marrow mesenchymal stem cell (BMSC) migration. Methods and Results: Human PDLCs were applied cyclic tension stretching. Exosomes were extracted from cultured PDLCs by ultracentrifugation, then characterized for their size, morphology and protein markers by NTA, TEM and western blotting. The process that PKH26-labeled exosomes taken up by BMSCs was assessed by confocal microscope. BMSC migration was examined by Transwell assay. Exosomes derived from PDLCs were identified. Cyclic tension stretch application on PDLCs can enhance the migration ability of BMSCs through exosomes. The exosomal miRNA expression profiles of unstretched and stretched PDLCs were tested by miRNA microarray. Four miRNAs (miR-4633-5p, miR-30c-5p, miR-371a-3p and let-7b-3p) were upregulated and six (miR-4689, miR-8485, miR-4655-3p, miR-4672, miR-3180-5p and miR-4476) were downregulated in the exosomes after stretching. Sixteen hub proteins were found in the miRNA-mRNA network. Gene Ontology and KEGG pathway analyses demonstrated that the target genes of differentially expressed exosomal miRNAs closely related to the PI3K pathway and vesicle transmission. Conclusions: The exosomes derived from cyclic tension-stretched PDLCs can promote the migration of BMSCs. Alternation of microRNA profiles provides a basis for further research on the regulatory function of the exosomal miRNAs of PDLCs during orthodontic tooth movement.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.97-105
• /
• 2019

Most of the BoP (Base of the Pyramid) do not have the economic power to eat balanced nutrients. Therefore, the solution is to add essential nutrients to the food you eat. This method can improve nutrition without putting an economic burden on the BoP classes. The aim of the paper is to apply the strategic management process for analysing BoP solutions in nutrition improvement sector. This allows identification of critical aspects in developing BoP solutions. This includes reaching sustainability related objectives. Two cases (Ajinomoto, Grameen Danone) covering both products and services have been researched, allowing a contribution towards the applicability of strategic management in respective situations. In this study, we analyzed the case through the "Appropriate Technology 2.0" framework of Polak and Warwick (2014). In addition, we introduced the strategy of BoP business. Based on the results of this analysis, we analyzed the success factors of appropriate technology business in the emerging markets through the 4A model.