• PNF and Movement
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2009

This research measures the conditions of spinal scoliosis of college students and analyses the factors that affect spinal scoliosis. From September 15, 2008 to October 30, 2008, the study was conducted with 142 C College students and measured the degrees of spinal scoliosis. The analysis was evaluated according to the Pneumex Analysis program. The collected data was compiled into statistics using the SPSS PC+ 12.0 program. The results were as follows: 1. It appeared that in the cases of C curve, reverse C curve, S curve, and the normal, there was a statistical significance(p=.010) between the conditions of spinal scoliosis of the two genders. 2. It appeared that the comparison among the three groups according to the characteristics of the subjects showed a statistical significance in spinal length(p=.000) in the C curve group, age(p=.019) and spinal length(p=.004) in the reverse C curve group, and spinal length (p=.035), difference in apparent leg length(p=.019), and difference in true leg length(p=.012) in the S curve group. 3. It appeared that in the normal group without spinal scoliosis, the results of comparing the differences in apparent true leg length and spinal length according to the characteristics of the subjects showed a statistical significance in spinal length and gender(p=.000), age (p=.008), height(p=.000), and whether or not there was a regular exercise over once per week(p=.001). 4. On the correlations between C curve, reverse C curve, and S curve and differences in apparent true leg length and spinal length, it appeared that: (a) As the difference in apparent leg length gets bigger the difference in true leg length gets big in C curve(r=.551, p=.000). (b) As the difference in apparent leg length gets bigger the difference in true leg length gets big in reverse C curve(r=.511, p=.006). (c) There is no correlation in S curve.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.737-740
• /
• 1992

This study was conducted to demonstrate the practical use of the buffer index curve as a criterion of silage quality evaluation, Forty five samples of the ensiled Italian ryegrass were collected from farms in Okayama, Japan. Silages were devided into 4 groups by the pattern of buffer index curve. Heavy wilting silages (A group) showed no peak on buffer index curve and Flieg's score of 95.6. However, moderate or weak wilting silages (B group) with moisture content of 63.3 showed a peak at pH 4.0 and a Flieg's score of 67.8. Both of A and B groups were regarded as a good quality silage. Silages (C group) with a peak at pH 4.5 were of a medium quality with Flieg's score of 45.3. Poorly preserved silages (D group) with Flieg's score of 12.0 had a peak at pH 5.0. There was a high positive correlationship (p<0.01) between the peak value of buffer index curve and the organic acid content.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.429-430
• /
• 2006

To estimate the fatigue life of flange-shaft assembly, fatigue test for flange material and bending fatigue test for flange-shaft assembly were conducted. Also, finite element analysis for flange-shaft assembly was conducted. Then, we have changed the obtained P-N curve to S-N curve using the finite element analysis results which were stress values at the location of fracture. The S-N curve of flange material itself was almost consistent with that of flange-shaft assembly, so it seems that the fatigue life of flange-shaft assembly could be estimated by using S-N curve for flange material and the stress at the location of fracture calculated by finite element methods.

• Review of KIISC
• /
• v.3 no.1
• /
• pp.86-90
• /
• 1993

Finite field GF$(2^n)5에서 정의된 elliptic curve가 있을때 그 curve위의 어떤 point p를 k배하는 연산은 암호론에서 매우 자주 쓰여진다. 이때 optimal normal bases를 이용하여 GF$(2^n)의 element를 표현하고, 또 elliptic curve를 선택할 때 animalous curve가 되도록 한다면, 기존이 방법 보다 매우 빠르게 k P를 구할 수 있다.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.217-222
• /
• 2001

For the life evaluating of notched members, it is the best way that performing the real fatigue test of structure containing notch. But this method required generally much times and costs to evaluate fatigue life. So, generally we use the modified S-N curve or several methods to predict fatigue life. In this study, crack initiation life was evaluated by fatigue testing the SAE keyhole specimen and smooth specimen made of Al 7075-T6 alloys using the constant load then obtained S-N curve of smooth specimen and P-N curve of SAE keyhole specimen. And, fatigue lives of keyhole specimen are predicted using some life prediction methods (Nominal range I method, Nominal range II method, FEM analysis) for investigating experimented results, and that were compared with experimental data. Predicted fatigue lives by FEM analysis were corresponded with experimental data between 1/3times and 3times on the whole, and predicted fatigue lives using modified S-N curve (Nominal range I method, Nominal range II method) were nonconservative compared with that of FEM analysis.

• Nuclear Engineering and Technology
• /
• v.4 no.1
• /
• pp.3-10
• /
• 1972

In order to verify the contribution of scattered photons in a restricted gamma-cell as a cause of the“before glow”on a thermoluminescent glow curve of natural quartz, the ratio of the scattered to primary radiation contributions (S/P) in the cell is measured and the relationship between the effective“before glow”height ( $h_{b}$) and S/P ratio is quantitatively investigated. The result shows quite good linear relationship between them with a correlation coefficient of ＋0.9, which possibly suggests that the electrons originally released by the photons of reduced energy are trapped in the shallower traps. Moreover, the ratios of $h_{b}$ to total glow area (At) and of effective “before glow”area (Ab) to At are also examined to see the relationships between S/P and each of them, respectively. The relationships are represented by exponential functions in the region of S/P greater than 0.035. Finally, the exposure limit for re-use of the natural quartz as a TLD was found to be approximately 10$^{5}$ R by analyzing total thermoluminescent output and corresponding exposure dose.ose.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.35-42
• /
• 1999

As our power system has changed the past undeveloped model causing the lacked supply of power to the civilized model that the remained one makes the voltage and the frequency rise at the middle of the night, the leading power factor operation of generators, that is, the under-exited operation is essentially to be needed, so, at a viewpoint of the stability of the power system, it is a very important factor. In this investigation. the equation of curves for each area on the capability curve has been studied at the above-mentioned viewpoint. Also, each capability curve for the operating power stations (Nuclear P/S, Thermal P/S, Hydrolic & pumping-up P/S Gas turbine P/S) has, been presented, and studied whether the leading power factor operational area is able to be expanded or not.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.8
• /
• pp.67-75
• /
• 2010

In this study, a series of 1 g shaking table tests were carried out for a single pile in soft clay with various input acceleration amplitudes and frequencies. Based on the results, dynamic p-y curves were drawn and, in turn, the dynamic p-y backbone curve was formed by connecting the peak points, corresponding to the maximum soil resistance, of the dynamic p-y curves. In order to represent the p-y backbone curve numerically, Matlock's p-y formulations for clay was used to find the initial stiffness ($k_{ini}$) and the ultimate capacity ($p_u$) of the clay, both of which are required to formulate the p-y backbone curve as a hyperbolic function. The suggested p-y backbone curve was verified through comparisons with currently available p-y curves as well as other researchers' centrifuge test results and numerical analysis results.

• The Korean Journal of Quaternary Research
• /
• v.18 no.1 s.22
• /
• pp.31-39
• /
• 2004

The stable-unstable curve graph (S-U curve) and the ignition los curve graph (IL curve) for pollen composition and inorganic material content in three areas (namely, Kawadoi Basin, Moniwa-Takada moor, and Nenoshiroishi moor) were prepared to reconstruct the recurrence history of slope failure during the Holocene in Northeastern Japan. Through the S-U curve, a period with a high slope failure frequency of 5,600~4,670yrB.P. was identified in Kawadoi Basin, two of 6,390~5,070yrB.P. and 4,750~3,800yrB.P. in Moniwa-Takada moor, and three of 6,630~6,070yrB.P., 5,890~5,360yrB.P., and 5,000~4,650yrB.P. in Nenoshiroishi moor. Through the IL curve, a period with a high slope failure frequency of 5,600~5,140yrB.P. was identified in Kawadoi Basin, and two of 6,390~6,170yrB.P. and 4,750~2,840yrB.P. in Moniwa-Takada moor. Most of above-mentioned periods were included in the period of slope instability in precedent studies. However, the periods with high slope failure frequency in this study were rather different from those in precedent studies. The times and numbers associated with these periods in each study area also showed discrepancies. Accordingly, to achieve the above-mentioned purpose, more case studies must be performed to improve the reconstruction level of slope failure frequency, which could be explained through the analysis of pollen composition and inorganic material content.

• Membrane Journal
• /
• v.8 no.3
• /
• pp.157-169
• /
• 1998

The effects of solvents (DMAc, NMP, 1,4-dioxane) and nonsolvents ($H_2O$, Methanol, n-hexane) on the morphology of 6FDA-p-TeMPD polyimide membrane, prepared by the wet phase inversion method, were studied. In the polymer/solvent/nonsolvent ternary system, the binodal curve, the coagulation value and the relative light transmission were measured, and the solubility parameter difference was calculated. The onset state and rate of liquid-liquid alemixing were predicted and the morphology of membrane was analyzed. It is found that the finger-like pores are formed within discontinuous polymer nodules when the binoclal curve is close to the polymer-solvent (P-S) axis, the coagulation value is small, the reduction of light transmission is easy to occur and the order of solubility parameter difference ($\Delta \delta_{i-j}$) is $\Delta \delta_{S-NS} > \Delta \delta_{P-NS} > \Delta \delta_{P-S}$. The dense skin with small nodules and the sponge type sublayer with macrovoid are formed in the case that the binodal curve is distant from the P-S axis, the onset time of liquid-liquid demixing is long and the order of $\Delta \delta_{i-j}$ is $\Delta \delta_{P-NS} >(\Delta \delta_{S-NS} < > \Delta \delta_{P-S})$. The thick layer of fine nodule coagulation and loosely grown sublayer of nodules appear when the binodal curve is distant from the P-S axis, the onset time of liquid-liquid demixing is very long and the order of $\Delta \delta_{i-j}$가 $\Delta \delta_{S-NS} > (\Delta \delta_{P-NS}$\lessgtr$ > (\Delta \delta_{P-NS} < >)\Delta \delta_{P-S}$ ).