• 한국실내디자인학회논문집
• /
• 제29호
• /
• pp.188-194
• /
• 2001

Increasing the user's need in the building facilities, the architects, engineers, and building managers must consider the user's opinion when they plan and construct the buildings. When planning and managing of the buildings, accepting the user's opinion is desirable and indispensible to solve the Problems about the architectural facilities between suppliers and users. To supply the efficient working environments, use the check listing tools and operate the post occupancy evaluation. The real estate and development company is selected for the evaluation. It is renovated in 2000 to fit in its working environment. The process of the evaluation is proceeded both private and group working spaces and facility and management of the buildings with 10 categories. Following the result of Post occupancy evaluation, the users of the building are mostly satisfied with their working environments after the renovation. However, the categories in thermal environment and indoor air and supply for office work need to be improved in advance.

• 한국정밀공학회지
• /
• 제13권3호
• /
• pp.132-140
• /
• 1996

This paper developes a torsional vibration model of heavy duty truck drive line for simulation of a driving rattle, which causes very annoying noise to driver at the full load driving condition. Test results show a peak in the fit plots at the frequency of the 2nd harmonics of propeller shaft revolution. A 10 d.o.f. lumped parameter nonlinear torsional vibration model is constructed and engine torque variation is calculated from P- .theta. diagram. Time responses are simulated and compared with the test results, which show fairly good agreement. The effects of paramenter change are investigated, and the optimum configuration is proposed.

• 대한환경공학회지
• /
• 제30권6호
• /
• pp.642-652
• /
• 2008

본 연구는 축산폐수 중 COD$_{Cr}$을 응집공정 후 Photo-Fenton 공정에 의해 산화분해 최적조건 및 제거 예측식에 수립에 관한 연구이다. 본 연구는 축산폐수 중 COD$_{Cr}$에 대한 Photo-Fenton 산화반응을 이용하여 이들 분해특성을 2차원 반응모델로 추정하기 위해 중심합설계법 대안으로 많이 사용되고 있는 박스-벤켄법(Box-Behnken method)을 이용하였다. 최적조건 수립을 위한 입력변수, 즉 3가지 변수(Fe(II)(x$_1$), $H_2O_2(x_2)$, pH(x$_3$)) 등을 램덤화, 반복화 및 블록화 원리에 따라 실험설계하여 반응값에 대한 예측식을 수학적으로 산출하였다. 수학적 및 통계적으로 산출된 예측식은 Y = 79.3 + 15.61x$_1$ - 7.31x$_2$ - 4.26x$_3$ - 18x$_1{^2}$ - 10x$_2{^2}$ - 11.9x$_3{^2}$ + 2.49x$_1x_2$ - 4.4x$_2x_3$ - 1.65x$_1x_3$와 같이 얻을 수 있었고 COD$^{Cr}$ 제거율(%)의 실측치에 대한 예측치의 적합도(goodness of fit) 검증시 결정계수(coefficient of determination: R$^2$) 0.96으로 에측식을 충분히 설명할 수 있었다. 예측 모형에 대한 최소제곱추정법으로 적합된 반응표면에서 1차 선형항(linear term)은 Fe(II)(x$_1$), $H_2O_2(x_2)$, 그리고 pH(x$_3$)은 상승작용(synergistic effect)으로 반응모델에 유의한 차이를 보였으며(p < 0.001) 그러나 교호항(cross-product term)은 $H_2O_2$ $\times$ pH(x$_2x_3$)와 순수이차항(quadratic terms)의 Fe(II) $\times$ Fe(II)(x$_1{^2}$), $H_2O_2$ $\times$ H$_2O_2$(x$_2{^2}$) 그리고 pH $times$ pH(x$_3{^2}$) 등은 대립적인(감쇠)(antagonistic effect) 작용으로 반응모델에 유의한 차이를 보였다(p < 0.01). 반응 모델에 대한 예측식 수립 후 COD$_{Cr}$ 제거율(%)의 최적조건을 도출하기 위해 정준분석(canonical analysis)와 능선분석(ridge analysis)에 이용한 결과 반응값(결과값: Y)은 84 $\pm$ 0.95%, COD$_{Cr}$ 최적처리를 위한 변수들의 조건은 Fe(II)(X$_1$) = 0.0146 mM, $H_2O_2$(X$_2$) = 0.0867 mM 그리고 pH(X$_3$) = 4.704 등의 결과를 얻을 수 있었다. 또한 이들 최적조건을 이용하여 재현성을 통한 모델검증 결과 높은 신뢰성을 보였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.890-894
• /
• 2002

The accuracy of the gamma function to describe lactation curve of Yankasa ewes was investigated using milk production data obtained from 168 ewes with either complete or incomplete 84 day lactation records. Ewes were daily hand milked after over-night separation from lamb and thorough disinfection of the udder. The daily milk yield on the average was estimated from the weekly total yield. The effect of type of birth, parity, season of birth and lactation length on the components of lactation curve (a, b, c and s) were analysed by least-square procedures. All factors except parity significantly (p<0.01) influenced the curve parameters. The goodness of fit of the function did not differ between the two classes of varying duration of lactation; incomplete lactation however, showed a lower persistency and as expected lower level of production. Correlations ($r_p$) between lamb weight gain and milk yield using the weight records from lamb weighed at weekly intervals indicated a high and positive relationship in the early lactation that decreased in intensity as the lactation advanced.

• Composites Research
• /
• 제35권2호
• /
• pp.98-105
• /
• 2022

본 연구에서는, 미세유체 시스템 기반 폴리바이닐알코올(PVA)/그래핀 옥사이드(GO)/산화철(Fe₃O₄) 자성 마이크로겔을 제조하고 겔의 염료 흡착성능을 평가하였다. 겔의 흡착성능(q_e)은 염료의 농도, pH, 및 접촉시간을 변수로 하여 평가하였다. 사용된 염료는 메틸렌 블루(MB), 크리스탈 바이올렛(CV), 말라카이트 그린(MG)이며, 마이크로겔은 메틸렌 블루에 대해 가장 높은 흡착성능(191.1 mg/g)을 나타내었다. pH에 따른 겔의 흡착성능은 염료가 가지고 있는 atomic nitrogen 이온(N⁺)의 영향으로 모든 염료에서 pH가 10일 때 가장 높은 흡착성능을 나타냈다. 등온흡착 데이터분석을 통해 Langmuir 등온선의 일치도가 높아 단분자층 흡착임을 확인하였으며, 동역학적 분석에서는 유사 1차 반응 보다 유사 2차 반응의 일치도가 높아 화학흡착임을 확인하였다. 또한, 자성 마이크로겔의 회수와 겔표면에 흡착된 염료의 탈착을 통한 재사용 성능을 평가하였는데, 흡착성능은 흡·탈착 5회동안 70% 이상의 성능을 유지하는 것으로 나타났다.

• Advances in nano research
• /
• 제10권1호
• /
• pp.77-90
• /
• 2021

In the present study, novel chitosan coated magnetic magnetite (Fe3O4) nanoparticles were successfully biosynthesized from mushroom, Agaricus campestris, extract. The obtained bio-nanocomposite material was used to investigate ultra-fast and highly efficient for removal of Ni2+ ions in a fixed-bed column. Chitosan was treated as polyelectrolyte complex with Fe3O4 nanoparticles and a Fungal Bio-Nanocomposite Material (FBNM) was derived. The FBNM was characterized by using X-Ray Diffractometer (XRD), Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Fourier Transform Infrared spectra (FTIR) and Thermogravimetric Analysis (TGA) techniques and under varied experimental conditions. The influence of some important operating conditions including pH, flow rate and initial Ni2+ concentration on the uptake of Ni2+ solution was also optimized using a synthetic water sample. A Central Composite Design (CCD) combined with Response Surface Modeling (RSM) was carried out to maximize Ni2+ removal using FBNM for adsorption process. A regression model was derived using CCD to predict the responses and analysis of variance (ANOVA) and lack of fit test was used to check model adequacy. It was observed that the quadratic model, which was controlled and proposed, was originated from experimental design data. The FBNM maximum adsorption capacity was determined as 59.8 mg g-1. Finally, developed method was applied to soft drinks to determine Ni2+ levels. Reusability of FBNM was tested, and the adsorption and desorption capacities were not affected after eight cycles. The paper suggests that the FBNM is a promising recyclable nanoadsorbent for the removal of Ni2+ from various soft drinks.

• 천문학논총
• /
• 제14권1호
• /
• pp.33-37
• /
• 1999

We have constructed a synthetic spectrum of the 2.5 micron $C_2H$ bands and compared them with diminutive structures in the near-infrared spectra of Comets P/Halley and West (1976 VI). We found that the Q branches of the $C_2H$ bands coincide with two small emission peaks in the spectra of the comets. We undertook Monte Carlo simulations using observed emission intensities of $C_2$ and possibly $C_2H$ in Comet P/Halley in order to derive a lifetime range of $C_2H$ and a production rate at the time of observations of P/Halley. We obtained a $C_2H$ production rate of $1\times10^{27}\;sec^{-1}$ for P/Halley on December 20, 1985, assuming the 2.5 micron features are due to $C_2H$. We derived a very short lifetime (<100 seconds) of $C_2H$ at 1AU heliocentric distance, assuming that the only parent molecule for $C_2H$ and $C_2$ is $C_2H$. Using this short lifetime we were unable to fit our $C_2$ distribution model to $C_2$ distribution curves observed by O'Dell et al.(1988), because our curve shows a steep slope compared with the observed one. We conclude that there must be significant additional source(s) for $C_2H$ and $C_2$ other than $C_2H_2$.

• Investigative Magnetic Resonance Imaging
• /
• 제5권1호
• /
• pp.33-37
• /
• 2001

목적 : 자성 자기공명조명제의 효율을 결정하는데는 상자성물질의 물분자 결합위치에 구속되어 있는 물분자와 자유 물분자사이의 물분자 교환율이 매우 중요한 역할을 담당한다. 따라서 본 연구에서는 $^{17}O-NMR$기법을 사용하여 현재 상용화 되어 있는 Gd 자기공명조영제 및 최근 간특이성 자기공명조영제로 제안되고 있는 Gd-EOB-DTPA의 물분자 교율을 측정하고자 하였다. 대상 및 방법 본 연구에 사용된 조영제는 Gd-DTPA, Gd-DTPA-BMA, Gd-DOTA, Gd-EOB-DTPA 이며 여기에 Isotech 사의 5% $^{17}O$로 치환된 증류수를 혼합하여 사용하였다. 결과적인 시료의 pH는 buffer용액을 사용하여 pH=7로 고정하였으며 다양한 온도에서 Bruker-600 (14.1 T, 81.3 MHz)모델의 NMR장비를 사용하여 측정하였다. 에코열 24개의 Carr-Purcell-Meiboom-Gill (CPMG) 펄스 시권스를 사용하여 $^{17}O$의 스핀-스핀 이완시간(T2)을 측정하고 이렇게 얻어진 T2 데이터는 최소자승법을 이용하여 Solomon-Bloembergen방정식에 fitting시켜서 최종적으로 각 조명제의 물분자 교환율을 계산하였다. 결과 : 측정된 각 조영제의 물분자 교환시간은 300k의 온도에서는 Gd-DTPA의 경우 0.427, Gd-DTPA-BMA의 경우 $1.99{\;}{\mu}s$, Gd-DOTA의 경우 $0.27{\;}{\mu}s$, Gd-EOB-DTPA의 경우 $0.11{\;}{\mu}s$로 나타났으며 이러한 물분자 교환시간은 온도에 따라 변화함을 알았다. 물분자 교환시간의 온도 의존성은 모든 조영제에서 지수함수의 형태로 나타났으나 조영제에 따라 온도가 올라감에 따라 물분자 교환시간이 감소하는 감소율에서는 차이를 나타내었다. 결론 : 상자성 조영제의 relaxation enhancement 기전을 이해하는데는 물분자 교환율에 대한 정보가 매우 중요하며 이러한 물분자 교환율을 정확히 측정하는데는 $^{17}O-NMR$기법이 매우 유용함을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.176-177
• /
• 2013

Surface plasmon polaritons (SPPs) have attracted the attention of scientists and engineers involved in a wide area of research, microscopy, diagnostics and sensing. SPPs are waves that propagate along the surface of a conductor, usually metals. These are essentially light waves that are trapped on the surface because of their interaction with the free electrons of conductor. In this interaction, the free electrons respond collectively by oscillating in resonance with the light wave. The resonant interaction between the surface charge oscillation and the electromagnetic field of the light constitutes the SPPs and gives rise to its unique properties. In this papers, we studied theoretical and experimental extraordinary transmittance (T) and reflectance (R) of 2 dimensional metal hole array (2D-MHA) on GaAs in consideration of the diffraction orders. The 2d-MHAs was fabricated using ultra-violet photolithography, electron-beam evaporation and standard lift-off process with pitches ranging from 1.8 to $3.2{\mu}m$ and diameter of half of pitch, and was deposited 5-nm thick layer of titanium (Ti) as an adhesion layer and 50-nm thick layer of gold (Au) on the semiinsulating GaAs substrate. We employed both the commercial software (CST Microwave Studio: Computer Simulation Technology GmbH, Darmstadt, Germany) based on a finite integration technique (FIT) and a rigorous coupled wave analysis (RCWA) to calculate transmittance and reflectance. The transmittance was measured at a normal incident, and the reflectance was measured at variable incident angle of range between $30^{\circ}{\sim}80^{\circ}$ with a Nicolet Fourier transmission infrared (FTIR) spectrometer with a KBr beam splitter and a MCT detector. For MHAs of pitch (P), the peaks ${\lambda}$ max in the normal incidence transmittance spectra can be indentified approximately from SP dispersion relation, that is frequency-dependent SP wave vector (ksp). Shown in Fig. 1 is the transmission of P=2.2 um sample at normal incidence. We attribute the observation to be a result of FTIR system may be able to collect the transmitted light with higher diffraction order than 0th order. This is confirmed by calculations: for the MHAs, diffraction efficiency in (0, 0) diffracted orders is lower than in the (${\pm}x$, ${\pm}y$) diffracted orders. To further investigate the result, we calculated the angular dependent transmission of P=2.2 um sample (Fig. 2). The incident angle varies from 30o to 70o with a 10o increment. We also found the splitting character on reflectance measurement. The splitting effect is considered a results of SPPs assisted diffraction process by oblique incidence.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권11호
• /
• pp.1551-1555
• /
• 2006

This study was carried out to investigate the use of three different mathematical models (Wood, Quadratic and Cubic) for describing the lactation curve of Akkaraman ewes. Data were collected from 42 ewes that were three years of age and from the same flock raised in The State Farm of $G{\ddot{o}}zl{\ddot{u}}$ in Konya Province. All ewes lambed in March. They were hand milked twice daily and the first milk test was performed with in the first month after lambing (mean = 27.8 day, SD = 4.26) in an attempt to describe the peak yield. The differences between estimated total milk yields by the models were not significant. The models were adequate for describing total milk yield. The differences between peak yields were not significant. The Wood model estimated the time of peak yield earlier than the other models and observed values (p<0.01). Especially the Cubic model's peak time was very close to really peak time (34.30 vs. 35.33 days). $R^2$ values of the models ranged from 85.85% to 96.20%. The Cubic model gave the best $R^2$ value (p<0.01). Correlation coefficients between descriptive values of the models changed from 0.32 to 1.00. Total milk yields of the models were highly correlated (above 0.99) with the total milk yield calculated by the Fleischmann method (p<0.01). As a result the Cubic model showed the best fit to the data collected from Akkaraman ewes and allowed a suitable description of the shape of the lactation curve.