• The korean journal of orthodontics
• /
• v.43 no.3
• /
• pp.113-119
• /
• 2013

Objective: To compare three-dimensionally the midfacial hard- and soft-tissue asymmetries between the affected and the unaffected sides and determine the relationship between the hard tissue and the overlying soft tissue in patients with nonsyndromic complete unilateral cleft lip and palate (UCLP) by cone-beam computed tomography (CBCT) analysis. Methods: The maxillofacial regions of 26 adults (18 men, 8 women) with nonsyndromic UCLP were scanned by CBCT and reconstructed by three-dimensional dental imaging. The frontal-view midfacial analysis was based on a $3{\times}3$ grid of vertical and horizontal lines and their intersecting points. Two additional points were used for assessing the dentoalveolar area. Linear and surface measurements from three reference planes (Basion-perpendicular, midsagittal reference, and Frankfurt horizontal planes) to the intersecting points were used to evaluate the anteroposterior, transverse, and vertical asymmetries as well as convexity or concavity. Results: Anteroposteriorly, the soft tissue in the nasolabial and dentoalveolar regions was significantly thicker and positioned more anteriorly on the affected side than on the unaffected side (p < 0.05). The hard tissue in the dentoalveolar region was significantly retruded on the affected side compared with the unaffected side (p < 0.05). The other midfacial regions showed no significant differences. Conclusions: With the exception of the nasolabial and dentoalveolar regions, no distinctive midfacial hard- and soft-tissue asymmetries exist between the affected and the unaffected sides in patients with nonsyndromic UCLP.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.28.3-29
• /
• 2015

$Ly{\alpha}$ nebulae, or "$Ly{\alpha}$ blobs", are extended (~100 kpc), bright (L[$Ly{\alpha}$] ~ 1044 erg/s) clouds of $Ly{\alpha}$-emitting gas. The origin of the $Ly{\alpha}$ emission remains unknown, but recent theoretical work suggests that measuring the polarization could discriminate among powering mechanisms. we will discuss current status of $Ly{\alpha}$ polarization observations at high-redshift and our on-going survey program. We will present the first narrow-band, imaging polarimetry of a $Ly{\alpha}$ blob, B3 J2330+3927 at z=3.09, with an embedded, radio-loud AGN (C. You et al. in prep.). The AGN lies near the blob's $Ly{\alpha}$ emission peak and its radio lobes align roughly with the blob's semi-major axis. With the SPOL polarimeter on the MMT telescope, we map the polarization in a grid of circular apertures of radius 0.6" (4.4 kpc), detecting a significant (>$2{\sigma}$) polarization fraction P% in 10 apertures and achieving strong upper-limits (as low as 2%) elsewhere. The degree of the polarization map increases from P% ~ 5% at ~5 kpc from the blob center to ~20% at the outer part (~30 kpc). The detections are distributed asymmetrically, roughly along the blob's major axis. The polarization angles (${\Theta}$) are mostly perpendicular to this axis. These results are consistent with the picture that $Ly{\alpha}$ photons produced at the AGN (or the host galaxy) are resonantly scattered away from the center. Higher polarization fraction on the radio jet suggests that the gas is more optically thin along the jet than the off-axis region.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.1
• /
• pp.21-29
• /
• 2012

The purpose of this study is to evaluate the mutual relations by measuring SNR from T2 weighted image and ADC values on the basis of the stiffness values from liver tissues. This study was conducted that total 37 people(23 of males and 11 of females) were taken the liver MRI examination and average age was $54.5{\pm}12.7$ years old. The equipment was MAGNETOM Skyra 3.0T (SIEMENS, Erlangen, Germany) and 32 channel body-array coil. The examination were conducted with HASTE T2 weighted image by axial plane, Spin-echo EPI (echo planner image) DWI (b-value = 800) and Magnetic resonance elastography. The ROIs (region of interest: 200-300 $mm^2$) were established on the basis of the first axial stiffness image corresponded 95% confidence interval from axial stiffness image and then were measured values. After drawing the grid lines, signals were measured SNR from T2 weighted image and ADC values on the same locations that were analysed other 3 planes respectively. The results were showed correlation (0.057) that were increased to SNR from T2 weighted image by increasing stiffness value that no significant difference statistically p = 0.003. Other results were showed correlations (-0.301) that were decreased to ADC values by increasing stiffness values that no significant difference statistically p = 0.088. In the 3.0T equipment, the results may be error in much the same fashion as the 1.5T from ADC values by evaluation of fibrosis stage. However, Magnetic resonance elastography would be useful method that is used to diagnose exactly liver fibrosis stages in the 3.0T.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.6-6
• /
• 2001

Oocyte freezing has become a prevalent source for related reproductive technologies. This study was carried out to evaluate viability of post-thawed bovine oocyte injected DTT-treated sperm following by two different activation stimuli (Group 1, 5 M ionomycin, 5 min ＋ CR1aa, 3 h . 1.9 mM dimetylaminopurine (DMP), 3 h; group 2, ionomycin ＋ 10 $\mu\textrm{g}$/$m\ell$ cycloheximide(CHX), 5h). The techniques of ultra-rapid freezing used in this study were essentially similar to those of described by Vajta et al (Theriogenology 1999; 52:939-948), Denuded oocytes at 22 h of culture were exposed to cryoprotectant (3.2 M Ethylene glycol, 2.36 M DMSO, 0.6 M sucrose), and followed by freezing in electron microscopic grid. After thawing the oocytes were transferred back into the drop of maturation medium and cultured for additional 2 h before being subjected to ICSI. All eggs were then cultured in CRlaa medium, and transferred into M199+10% FCS on day 4. The culture was maintained until day 9. In Experiment 1, frozen-ICSI eggs were compared on development into blastocyst to those of unfrozen and IVF control. Those eggs were activated with the method of group 2. A higher proportion of unfrozen-ICSI and IVF eggs developed into cleavage and blastocysts than of frozen-ICSI eggs (65% and 13%; 71% and 23% vs. 39% and 8%; P<0.05). In Experiment 2, development and ploidy of embryos made from group 1 were compared to those from group 2. Between groups there did not differ on the rates of development, however, chromosomal abnormality in group 1 was significantly higher than in group 2 (49% vs. 30%; P<0.05). The present result suggests that frozen bovine oocytes can be used for ICSI.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1609-1618
• /
• 2015

DC microgrids are considered as prospective systems because of their easy connection of distributed energy resources (DERs) and electric vehicles (EVs), reduction of conversion loss between dc output sources and loads, lack of reactive power issues, etc. These features make them very suitable for future industrial and commercial buildings' power systems. In addition, the bipolar-type dc system structure is more popular, because it provides two voltage levels for different power converters and loads. To keep voltage balanced in such a dc system, a bidirectional dual buck-boost voltage balancer with direct coupling is introduced based on P-cell and N-cell concepts. This results in greatly enhanced system reliability thanks to no shoot-through problems and lower switching losses with the help of power MOSFETs. In order to increase system efficiency and reliability, a novel burst-mode control strategy is proposed for the dual buck-boost voltage balancer. The basic operating principle, the current relations, and a small-signal model of the voltage balancer are analyzed under the burst-mode control scheme in detail. Finally, simulation experiments are performed and a laboratory unit with a 5kW unbalanced ability is constructed to verify the viability of the bidirectional dual buck-boost voltage balancer under the proposed burst-mode control scheme in low-voltage bipolar-type dc microgrids.

• The Korean Journal of Applied Statistics
• /
• v.27 no.6
• /
• pp.1039-1047
• /
• 2014

An autoregressive model with normal errors is a natural model that attempts to fit time series data. More flexible models that include normal distribution as a special case are necessary because they can cover normality to non-normality models. The skewed exponential power distribution is a possible candidate for autoregressive models errors that may have tails lighter(platykurtic) or heavier(leptokurtic) than normal and skewness; in addition, the use of skewed exponential power distribution can reduce the influence of outliers and consequently increases the robustness of the analysis. We use SIR algorithm and grid method for an efficient Bayesian estimation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.3
• /
• pp.166-178
• /
• 2012

In order to simulate storm surge for the west coast, complex physics of asymmetrical typhoon wind vortex, tide and wave are simultaneously incorporated on a fine finite element mesh extended to the North Western Pacific sea. Asymmetrical vortex based on maximum wind radii for each quadrant by JTWC's best tracks are input in pADCIRC and wave stress is accounted by dynamic coupling with unSWAN. Computations performed on parallel clusters. In hindcasting simulation of typhoon Kompasu(1007), model results of wave characteristic are very close with the observed data at Ieo island, and sea surface records at major tidal stations are reproduced with satisfaction when typhoon is approaching to the coast. It is obvious that increasing of local storm surges can be found by introducing asymmetrical vortex. Thus this approach can be satisfactorily applied in coastal hazard management against to storm surge inundation on low level area and major harbor facilities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.27-37
• /
• 2001

Soil erosion by outflow of water or rainfall has caused many environmental problems as declining agricultural productivity, damaging pasture and preventing flow of water. As the interest in environment is increasing lately, soil erosion is considered as a serious problem, whereas the systematic regulation and analysis for that have not established yet. This research shows the method of extracting factor entered model which expects soil erosion by GSIS. There are several erosion model such as ANSWER, WEPP, RUSLE. The research used RUSLE erosion model which could expect general soil erosion connected easily with GSIS data. RUSLE's input factors are composed of rainfall runoff factor(R). soil erodibility factor(K), slope length factor(L), slope steepness factor(S), cover management factor(C) and support practice factor(P). The general equation used to extract L, S factor on the RUSLE to be oriented for agricultural area has some limitation to apply whole watershed. So, on this study we used a revised empirical equation applicable to the watershed by grid on the GSIS. Also, we analyzed RUSLE factors by watershed being analyzed with watershed extraction algorithm. Then we could calculate the minimum, maximum. mean and standard deviation of RUSLE factors by watershed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.35-43
• /
• 2006

An MPI Checkpointer is a tool which provides fault-tolerance through checkpointing The previous researches related to the MPI checkpointer have focused on automatic checkpointing and recovery capabilities, but they haven't considered portability issues. In this paper, we discuss design and implementation issues considered for portability when we developed an MPI checkpointer called STFT. In order to increase portability, firstly STFT supports the abstraction interface for a single process checkpointer. Secondly, STFT uses a user-based checkpointing method, and limits possible checkpointing places a user can make. Thirdly, STFT lets the MPI_Init create network connections to the other MPI processes in a fixed order. With these features, we expect STFT can be easily adaptable to various platforms and MPI implementations, and confirmed STFT is easily adaptable to LAM and MPICH/P4 with the prototype Implementation.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.12
• /
• pp.1744-1748
• /
• 2002

Trifluoroacetate anion as a connector has been studied on $AgCF_3CO_2$ with 3,3'-$Py_2X$(X=O vs S) produces 1 : 1 adducts of [Ag($CF_3CO_2$)(3,3'-$Py_2X<$)]. Crystallographic characterization of [Ag($CF_3CO_2$)(3,3'-$Py_2X$)](monoclinic $P2_1$a=7.383(1)$\AA$b=19.801(3)$\AA$c=9.297(3)$\AA$,$\beta$=$100.26(2)^{\circ}$,V=1337.4(5) $\AA^3$, Z=2, R=0.0386) reveals that the 3,3'-$Py_2O$ spacer connects two silver ions to give a single strand and that the single strands are linked via the trifluoroacetate anions in an "up and down even-bridge" to give an elegant molecular grid. The framework of [$Ag(CF_3CO_2)(3,3'-Py_2X)$](monoclinic $P2_1/c$a=8.331(2)$\AA$b=14.010(2)$\AA$,c=11.926(3 $\AA$$\beta$=$93.70(2)^{\circ}$=1385.1(6)$\AA^3$, Z=4, R=0.0589) is a single-strand. The single strands are connected via the trifluoroacetate anions in a double-bridge, resulting in a typical molecular chicken-wire. The trifluoroacetate anion as a connector appears to be primarily associated with its moderately coordinating ability. Their structural features have been discussed based on the anion exchangeability. Thermal analyses indicate that the compounds are stable up to approximately $200^{\circ}C$.