• Title/Summary/Keyword: P solubility

Search Result 940, Processing Time 0.025 seconds

Pood Component Characteristics of Cuttle Bone as a Mineral Source (무기질 소재로서 갑오징어갑의 성분 특성)

  • CHO Moon-Lae;HEU Min-Soo;KIM Jin-Soo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.34 no.5
    • /
    • pp.478-482
    • /
    • 2001
  • This study was conducted to get a knowledge on food components of cuttle bone (CB) as a food resource. The yields and ash contents of CB were about $7.5\%$ on whole cuttle fish and about $90\%$ on dry basis, respectively, The contents of heavy metal might not invoke health risk in using food resource, The major mineral of CB was calcium as about $22\%$ in content. The yields, proximate compositions, heavy metal and mineral contents were not significantly different between domestic and imported CB. Judging from X-ray diffraction pattern, most of calcium in CB was present as a form of calcium carbonate (CC), and scanning electron micrograph showed irregular form. Buffering capacity of CB showed strongly at pH 7, and its pattern was the same as shown in that of CC, And CB solution showed a very high degree in turbidity comparing to that of CC solution. The solubility of CB was superior to that of CC, but inferior to those of calcium powders on the market, It was concluded from above results that CB could be effectively utilized as a calcium source.

  • PDF

Increase in Moisture Barrier Properties of Alginate-based Films by Composting with Fatty Acids and $CaCl_{2}$ Treatment (지방산과 $CaCl_{2}$ 처리에 의한 알긴산 필름의 수분저항성 증진)

  • Rhim, Jong-Whan;Kim, Ji-Hye
    • Korean Journal of Food Science and Technology
    • /
    • v.36 no.3
    • /
    • pp.432-439
    • /
    • 2004
  • Increase in water vapor barrier properties of sodium alginate films was studied by preparing composite films with fatty acids, i.e., lauric, palmitic, stearic, and oleic acids, and by treatment with 3% $CaCl_{2}$ solution for 3 min. Film thickness, surface color, microstructure, tensile strength (TS), elongation at break (E), water vapor permeability (WVP), water solubility (WS), and sorption isotherm of films were investigated. Microstructure of films observed with SEM was changed by fatty acid and $CaCl_{2}$ treatments. TS decreased 25-70% depending on fatty acid used, and increased 1.5- to 2-fold by $CaCl_{2}$ treatment. E decreased by both fatty acid and $CaCl_{2}$ treatments. Except oleic acid, WVP decreased significantly (p<0.05) by forming composite films with fatty acids, particularly with stearic acid, WVP decreased more than two-fold. WS also decreased by fatty acid and $CaCl_{2}$ treatments. In stearic acid, WS decreased about 30-fold by combined treatment of fatty acid and $CaCl_{2}$. Sorption isotherm showed typical biphasic pattern with deliquescent point of 0.75. Results of isotherms and BET monolayer moisture content indicated hydrophilicity of film decreased by $CaCl_{2}$ treatment.

Performance Evaluation of Hydrogen Generation System using NaBH4 Hydrolysis for 200 W Fuel Cell Powered UAV (200 W급 연료전지 무인기를 위한 NaBH4 가수분해용 수소발생시스템의 성능평가)

  • Oh, Taek-Hyun;Kwon, Sejin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.43 no.4
    • /
    • pp.296-303
    • /
    • 2015
  • The concentration of solute in a $NaBH_4$ solution is limited due to the low solubility of $NaBO_2$. The performance of a hydrogen generation system was evaluated using various concentrations of $NaBH_4$ solution. First, a self-hydrolysis test and a hydrogen generation test for 30 min were performed. The composition of $NaBH_4$ solution was selected to be 1 wt% NaOH + 25 wt% $NaBH_4$+74wt% $H_2O$ by considering the amount of hydrogen loss, stability of hydrogen generation, $NaBO_2$ precipitation, conversion efficiency, and the purpose of its application. A hydrogen generation system for a 200 W fuel cell was evaluated for 3 h. Although hydrogen generation rate decreased with time due to $NaBO_2$ precipitation, hydrogen was produced for 3 h (conversion efficiency: 87.4%). The energy density of the 200 W fuel cell system was 263 Wh/kg. A small unmanned aerial vehicle with this fuel cell system can achieve 1.5 times longer flight time than one flying on batteries.

A New Class of Platinum (II) Complexes [Pt (trans-1-daeh) (DPPP)] $2NO_3$ and [Pt (trans-1-daeh)(DPPE)] $2NO_3$ Exhibiting Antitumor Activity and Nephrotoxieity (새로운 Platinum (II) Complex ([Pt (II)(trans-1-dach)(DPPP)] $(NO_3)_2$와 [Pt (II)(trans-1-dach)(DPPE)] $(NO_3)_2$의 항암효과 및 신독성에 관한연구)

  • Jung, Jee-Chang;Yoon, Chin-Hee;Chang, Sung-Goo;Lee, Kyung-Tae;Rho, Young-Soo
    • The Korean Journal of Pharmacology
    • /
    • v.29 no.2
    • /
    • pp.283-295
    • /
    • 1993
  • Pt-complexes is currently one of the most compounds used in the treatment of solid tumors. However, its used is limited by severe side effects such as renal toxicity. Our platinum-based drug discovery program is aimed at developing drugs capable of diminishing toxicity and improving antitumor activity. We synthesized new Pt (II) complex analogues containing 1, 2-diaminocyclohexane (dach) as carrier ligand and 1, 3-bis (diphenylphosphino) propane (DPPP)/1,2-bis (diphenylphosphino) ethane (DPPE) as a leaving group. Furthermore, nitrate was added to improve the solubility. A new series of (KHPC-001) [Pt (trans-1-dach)(DPPP)] $2NO_3$ and (KHPC-002) [Pt (trans-1-dach)(DPPE)] $2NO_3$ were synthesized and characterized by their elemental analysis and by various spectroscopic techniques [infrared (IR), $^{13}carbon$ nuclear magnetic resonance (NMR)]. KHPC-001 and KHPC-002 demonstrated acceptable antitumor activity aganist P-388, L-1210 lymphocytic leukemia cells and significant activity as compared with that of cisplatin. The toxicity of KHPC-001 and KHPC-002 was found quite less than that of cisplatin using MTT, $[^3H]$ thymidine uptake and glucose consumption tests in rabbit proximal tubule cells and human kidney cortical cells.

  • PDF

Effects of Fly Ash on Heavy Metal Contents in Percolated Water of Paddy Soil (석탄회 시용이 논 토양수중의 중금속성분 용출에 미치는 영향)

  • Kim, Yong Woong;Yoon, Chung Han;Shin, Bang Sup;Kim, Kwang Sik
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.29 no.3
    • /
    • pp.236-242
    • /
    • 1996
  • This study was conducted to investigate the changes of heavy metals in percolated water of paddy soil in which rice was cultivated in conditions of 0%, 5%. 30% addition of bituminous and anthracite fly ash respectively. In cultivated plot, the contents of Fe in percolated water increased gradually during the cultivation. But there was no sharp difference of Fe contents in fly ash treated plots. The contents of Mn in percolated water increased gradually during the cultivation and was high in the cultivated plot. But difference in the contents of Mn among plots not clear. The contents of Zn in percolated water was highest during 20-25 days in the cultivation, thereafter decreased gradually. The fly ash did not cause to increase the contents of Zn in percolated water. The contents of Cu in percolated water decreased through the cultivation. Fly ash treatment did not cause to increase the contents of Cu in percolated water. The contents of Pb in percolated water decreased gradually over the cultivation. Fly ash treatment did not largely influence to Pb percolation. In mid-July. Pb did not almost appeared in percolated water. The contents of Cd was highest about 15 days of the transplant, thereafter decreased gradually. After 40 day of the cultivation, leach of Cd stopped. When fly ashes were applied in paddy soil, the contents of heavy metals in percolated water was not so much compared with control plot. It seems that originally low contents of heavy metals in fly ash and decrease in solubility of heavy metals in a relatively high soil pH make it possible to use fly ash as a soil conditioner.

  • PDF

Thermal and physiochemical properties of faba bean (Vicia faba L.) flour and starch (Faba bean 가루 및 녹말의 열역학적 특성과 물리화학적 특성)

  • Kim, Hui-Yun;Choi, Yohan;Jo, Eun-Jeong;Baik, Moo-Yeol;Choi, Hyun-Wook
    • Korean Journal of Food Science and Technology
    • /
    • v.52 no.4
    • /
    • pp.409-414
    • /
    • 2020
  • In this study, we conducted a physiochemical property analysis using commercial faba bean flour (CFBF), faba bean flour (FBF), and faba bean starch (FBS). We observed that the FBS granules were elliptical and cracked on the surface. Moreover, FBS showed significantly lower solubility and apparent viscosity than FBF and CFBF. With respect to the pasting properties, FBS exhibited a peak viscosity of 1349.3 cP at 94.8℃ and a breakdown of 42.7 cP, whereas FBF and CFBF displayed no pasting properties. The FBS gelatinization enthalpy (12.9 J/g) was relatively high compared with the values obtained for FBF and CFBF (5.9 and 4.6 J/g, respectively). The FBS X-ray diffraction patterns showed a C-type pattern with peaks at diffraction angle (2θ) of 5.9°, 15.2°, 17.3°, and 23.1°, which were the same in FBF and CFBF with relatively low peak intensity. These results represent basic data for using faba bean as a food material.

Preparation of Hydroxypropyl Methyl Cellulose with Controlled Solubility Rate by Surface Treatment Reaction (표면처리반응에 의한 용해속도조절용 Hydroxypropyl Methyl Cellulose의 제조)

  • Lee, Moo-Jin;Shin, Young-Jo
    • Applied Chemistry for Engineering
    • /
    • v.10 no.4
    • /
    • pp.581-585
    • /
    • 1999
  • The surface treated hydroxypropyl methylcellulose(HPMC) which could adjust the soluble time was synthesized when 40 wt % glyoxal solution and $KH_2PO_4$ were sprayed and reacted. And also, the solution dynamic at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion characteristics at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion was observed in the neutral solution and the viscosity was increased after directly dissolved as the solution become alkali condition. But the fine-powder type of HPMC which reacted with glyoxal and $KH_2PO_4$ was dispersed regardless of pH of solution and observed that it was dissolved and its viscosity increased after elapsing some time. With increasing amount of glyoxal and $KH_2PO_4$, the soluble time was delayed. The reaction condition was about 60 min at $75{\sim}85^{\circ}C$. Especially, the removal process of organic solvent after reaction was not required due to reaction under water solution without organic during glyoxal and $KH_2PO_4$ treatment. And also, the HPMC which could adjust the soluble rate in water or organic solvent by changing the degree of substitution of HPMC was synthesized.

  • PDF

Hypoallergenic and Physicochemical Properties of the A2 β-Casein Fractionof Goat Milk

  • Jung, Tae-Hwan;Hwang, Hyo-Jeong;Yun, Sung-Seob;Lee, Won-Jae;Kim, Jin-Wook;Ahn, Ji-Yun;Jeon, Woo-Min;Han, Kyoung-Sik
    • Food Science of Animal Resources
    • /
    • v.37 no.6
    • /
    • pp.940-947
    • /
    • 2017
  • Goat milk has a protein composition similar to that of breast milk and contains abundant nutrients, but its use in functional foods is rather limited in comparison to milk from other sources. The aim of this study was to prepare a goat A2 ${\beta}$-casein fraction with improved digestibility and hypoallergenic properties. We investigated the optimal conditions for the separation of A2 ${\beta}$-casein fraction from goat milk by pH adjustment to pH 4.4 and treating the casein suspension with calcium chloride (0.05 M for 1 h at $25^{\circ}C$). Selective reduction of ${\beta}$- lactoglobulin and ${\alpha}_s$-casein was confirmed using sodium dodecyl sulphate-polyacrylamide gel electrophoresis and reverse-phase high-performance liquid chromatography. The hypoallergenic property of A2 ${\beta}$-casein fraction was examined by measuring the release of histamine and tumor necrosis factor alpha from HMC-1 human mast cells exposed to different proteins, including A2 ${\beta}$-casein fraction. There was no significant difference in levels of both indicators between A2 ${\beta}$-casein treatment and the control (no protein treatment). The A2 ${\beta}$-casein fraction is abundant in essential amino acids, especially, branched-chain amino acids (leucine, valine, and isoleucine). The physicochemical properties of A2 ${\beta}$-casein fraction, including protein solubility and viscosity, are similar to those of bovine whole casein which is widely used as a protein source in various foods. Therefore, the goat A2 ${\beta}$-casein fraction may be useful as a food material with good digestibility and hypoallergenic properties for infants, the elderly, and people with metabolic disorders.

Synthesis and Thermal Properties of Aromatic Poly(o-hydroxyamide)s Containing Phenylene Diimide Unit (Phenylene Diimide 단위를 포함한 방향족 Poly(o-hydroxyamide)s의 합성 및 열적 특성)

  • Lee, Eung-Jae;Yoon, Doo-Soo;Choi, Jae-Kon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.11
    • /
    • pp.6029-6038
    • /
    • 2013
  • In this study we attempt to modify the backbone structure and improve processibility of PBO having high melting and glass transition temperature. A series of aromatic poly(o-hydroxyamide)s(PHAs) were synthesized by direct polycondensaton of diacides containing diimide unit with two types of bis(o-aminophenol)s including 3,3'-dihydroxybenzidine and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. PHAs were studied by FT-IR, $^1H$-NMR, DSC and TGA. PHAs exhibited inherent viscosities in the range of 0.34~0.65 dL/g at $35^{\circ}C$ in DMAc solution. The PHA 1 and 6F-PHA 6, introducing o-phenylene unit in the main chain showed excellent solubilities in aprotic solvents such as NMP etc. However, the PHA 3, having p-phenylene unit was not even dissolved perfectly with LiCl salt. 6F-PHAs were readily soluble at room temperature in aprotic solvents except 6F-PHA 3. But they showed better solubility than that of PHAs. The polybenzoxazoles(PBOs) were quite insoluble in other solvents except partially soluble in sulfuric acid. PBOs exhibited relatively high glass transition temperatures(Tg) in the range of 306~$311^{\circ}C$ by DSC. The maximum weight loss temperature and char yields of PHA3 and 6F-PHA3 showed the highest values of $658^{\circ}C$ and $653^{\circ}C$, 62.6 % and 62.1 %, respectively.

Water-insoluble, Whey Protein-based Microcapsules for Controlled Core Release Application (유청단백질을 이용한 미세캡슐의 응용)

  • Lee, Sung-Je
    • 한국유가공학회:학술대회논문집
    • /
    • 2005.06a
    • /
    • pp.37-61
    • /
    • 2005
  • Microcapsules consisting of natural, biodegradable polymers for controlled and/or sustained core release applications are needed. Physicochemical properties of whey proteins suggest that they may be suitable wall materials in developing such microcapsules. The objectives of the research were to develop water-insoluble, whey protein-based microcapsules containing a model water-soluble drug using a chemical cross-linking agent, glutaraldehyde, and to investigate core release from these capsules at simulated physiological conditions. A model water soluble drug, theophylline, was suspended in whey protein isolate (WPI) solution. The suspension was dispersed in a mixture of dichloromethane and hexane containing 1% biomedical polyurethane. Protein matrices were cross-linked with 7.5-30 ml of glutaraldehyde-saturated toluene (GAST) for 1-3 hr. Microcapsules were harvested, washed, dried and analyzed for core retention, microstructure, and core release in enzyme-free simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) at 37$^{\circ}C$, A method consisting of double emulsification and heat gelation was also developed to prepare water-insoluble, whey protein-based microcapsules containing anhydrous milkfat (AMF) as a model apolar core. AMF was emulsified into WPI solution (15-30%, pH 4.5-7.2) at a proportion of 25-50% (w/w, on dry basis). The oil-in-water emulsion was then added and dispersed into corn oil (50 $^{\circ}C$)to form an O/W/O double emulsion and then heated at 85$^{\circ}C$ for 20 min for gelation of whey protein wall matrix. Effects of emulsion composition and pH on core retention, microstructure, and water-solubility of microcapsules were determined. Overall results suggest that whey proteins can be used in developing microcapsules for controlled and sustained core release applications.

  • PDF