• Journal of Sericultural and Entomological Science
• /
• v.45 no.1
• /
• pp.46-57
• /
• 2003

This study was carried out to investigate the characteristics of the soluble sericins after degumming and after hydrolysis of insoluble sericin with various enzymes. Especially, the hydrolysis characteristics were examined in terms of molecular weight of the soluble sericin. Amino acid composition and molecular weight characteristics of the soluble sericins were also studied. When the insoluble sericin was hydrolyzed with kojizyme and flavourzyme, the solubility was highest at pH 7 and 50$^{\circ}C$. On the other hand, in the cases of protamex and alcalase, the highest solubility was obtained at 60$^{\circ}C$. In these cases, solubility increased with pH. In enzymatic hydrolysis, the solubility was increased with concentration of enzymes until 4 hours. After then, a slight difference was found along with treatment times. In enzymatic hydrolysis, the absorbance of the soluble sericin was increased with concentration of enzymes and treatment times. Average degree of polymerization was decreased with treatment time and concentration. The amino acid compositions were similar in low(low molecular weight by degumming) and high (high molecular weight by degumming). Those of PK (soluble sericin hydrolyzed with kojizyme), PP (soluble sericin hydrolyzed with protamex), and PA(soluble sericin hydrolyzed with alcalase) were similar to each other. Serine and tyrosine compositions were higher in low and high than those of PK, PP, and PA. However proline was absent in low and high. Molecular weights of the various sericins became higher as KP>high>PP>low>PA and those of KP and PA were 9,800 and 905 respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.701-710
• /
• 2019

Objective: This study investigated the effect of different acute heat stress (HS) levels on chicken meat quality and ultra-structure. Methods: Chickens were randomly divided into 7 groups to receive different HS treatments: i) $36^{\circ}C$ for 1 h, ii) $36^{\circ}C$ for 2 h, iii) $38^{\circ}C$ for 1 h, iv) $38^{\circ}C$ for 2 h, v) $40^{\circ}C$ for 1 h, vi) $40^{\circ}C$ for 2 h, and vii) un-stressed control group ($25^{\circ}C$). Blood cortisol level, breasts initial temperature, color, pH, water holding capacity (WHC), protein solubility and ultra-structure were analyzed. Results: HS temperatures had significant effects on breast meat temperature, lightness ($L^*$), redness ($a^*$), cooking loss and protein solubility (p<0.05). The HS at $36^{\circ}C$ increased $L^*{_{24h}}$ value (p<0.01) and increased the cooking loss (p<0.05), but decreased $a^*{_{24h}}$ value (p<0.05). However, as the temperature increased to $38^{\circ}C$ and $40^{\circ}C$, all the values of $L^*{_{24h}}$, cooking loss and protein denaturation level decreased, and the differences disappeared compared to control group (p>0.05). Only the ultimate $pH_{24h}$ at $40^{\circ}C$ decreased compared to the control group (p<0.01). The pH in $36^{\circ}C$ group declined greater than other heat-stressed group in the first hour postmortem, which contributed breast muscle protein degeneration combining with high body temperature, and these variations reflected on poor meat quality parameters. The muscle fiber integrity level in group $40^{\circ}C$ was much better than those in $36^{\circ}C$ with the denatured position mainly focused on the interval of muscle fibers which probably contributes WHC and light reflection. Conclusion: HS at higher temperature (above $38^{\circ}C$) before slaughter did not always lead to more pale and lower WHC breast meat. Breast meat quality parameters had a regression trend as HS temperature raised from $36^{\circ}C$. The interval of muscle fibers at 24 h postmortem and greater pH decline rate with high body temperature in early postmortem period could be a reasonable explanation for the variation of meat quality parameters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.6
• /
• pp.898-904
• /
• 2006

Effects of sodium bicarbonate (SBC) injection on meat quality and functionality of porcine M. longissimus lumborum were investigated. Fifteen pigs ($100{\pm}5kg$) were randomly selected at a commercial slaughter plant. After slaughtering the loins were dissected from the carcass before chilling at approximately 30 minutes post mortem. The loins were divided into four cuts for sample treatment, and SBC of 0.25 M, 0.40 M and 0.75 M was injected (2% w/w) using a syringe. As SBC injection level was increased, muscle pH increased significantly (p<0.05). SBC injection decreased lightness ($L^*$) values on the surface of muscle. Moreover, with injection of SBC, drip loss %, cooking loss % and shear force were significantly (p<0.05) decreased, whereas WHC and $Na^+$ content were significantly (p<0.05) increased. From panel testing of uncooked pork loin, no significant differences (p>0.05) were found in aroma, off-flavor and drip between injection of SBC at different levels and the control, although color and acceptability were significantly lower (p<0.05) in control pork loin compare with injection of SBC at 0.75 M. In cooked pork loin from the panel test, aroma, flavour, off-flavour and juiciness were found to be similar (p>0.05) on all treatments, but tenderness and acceptability were significantly higher (p<0.05) with injection of SBC at 0.75 M than for control loin. Myofibrillar protein solubility of muscles treated with SBC was significantly (p<0.05) higher than that of the control, although no significant differences (p>0.05) were found in sarcoplasmic protein solubility between the treatments. These results indicated that SBC injection into pre-rigor porcine M. longissimus lumborum could improve ultimate pork quality characteristics such as meat color, water-holding capacity, and could inhibit muscle protein denaturation due to an increase in muscle pH.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.5
• /
• pp.295-300
• /
• 2011

Paclitaxel is a well known anticancer agent and has been a pharmaceutical challenge because of its extremely poor water-solubility and susceptibility to the p-glycoprotein (p-gp)-mediated efflux in multi-drug resistant (MDR) cancer cells. Tributyrin (TB), a triglyceride with relatively short fatty acid chains, was chosen as solubilizing vehicle for paclitaxel based on the solubility study (26.6 mg/mL). Tributyrin (10%) o/w emulsion containing paclitaxel (5%), egg phosphatidylcholine (5%) and pegylated phospholipid (0.5%) was prepared by high pressure homogenization to obtain submicron-sized emulsion. The mean particle size of the resultant TB emulsion was 395.5 nm. Paclitaxel in TB emulsion showed higher anticancer activity against human breast cancer cell line, MCF-7, than free form delivered in DMSO solution. On the other hand, its anticancer activity was significantly reduced in MCF-7/ADR, a MDR variant cancer cell line of MCF-7, and recovered by the presence of verapamil, suggesting of the susceptibility to the p-gp mediated efflux even though paclitaxel was encapsulated into emulsion. The TB emulsion showed great potential as a promising vehicle for water-insoluble anticancer agent, paclitaxel.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.829-837
• /
• 2016

The mechanism of micro-bubble generation with a pump is not clarified yet, so the design of water treatment systems with a micro-bubble generating pump is based on trial and error methods. This study tried to explain clearly quantitative relationships of experimental micro-bubble concentration ($C_{air}$) of continuous operation tests with a micro-bubble generating pump and theoretical air solubility. Operation parameters for the tests were discharge pressure ($P_g$), water ($Q_{w0}$) and air ($q_0$) flow rates, orifice diameter ($D_o$), and retention time (t). The experimental micro-bubble concentrations ($C_{air}$) at 4.8 atm of discharge pressure ($P_g$) were in the range of 21.04 to 25.29 mL/L. When the retention time (t) by changing the pipe line length ($L_p$) increased from 1.22 to 6.77s, the experimental micro-bubble concentrations ($C_{air}$) increased from 25.86 to 30.78 mL air/L water linearly. The dissolved and dispersed micro-bubble concentrations ($C_{air}$) are approximately 4 times more than the theoretical air solubility.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.49-54
• /
• 2007

The effects of hydrostatic pressure (HP) treatment on the physicochemical, morphological, and textural properties of bovine semitendinosus (ST) muscle were assessed. Based on SDS-PAGE, the decrease in HP-treated ST muscle protein solubility in 0.1 M KCl buffer (pH 7.0) was attributable to a reduction in the levels of sarcoplasmic protein, and the protein solubility decrease observed in 0.6 M KCl buffer (PH 7.0) was attributable to a reduction in the levels of myosin heavy-chain and actin. Scanning electron microscope (SEM) observations showed that muscle fibers became finer and more compact with increasing pressures. The shear force and hardness of ST muscle pressurized to 300 MPa decreased significantly (p<0.05), however samples pressurized at 100 and 500 MPa exhibited a significant increase in both attributes relative to the control sample (p<0.05).

• Food Science of Animal Resources
• /
• v.41 no.6
• /
• pp.997-1011
• /
• 2021

The processing characteristics of freeze-dried pork powder as raw meat for comminuted meat products were compared with those of freeze-thawed pork. The tertiary structural properties, oxidation, and solubility of proteins in the freeze-dried pork powder were investigated. In addition, the properties of the emulsion gels manufactured with freeze-dried pork powder (GFD) and freeze-thawed pork (GFT) at 1.5% and 2.0% NaCl were evaluated. The surface hydrophobicity and intrinsic tryptophan fluorescence intensity of myofibrillar proteins between the freeze-dried pork powder and freeze-thawed pork were similar. However, freeze-dried pork powder had higher carbonyl compounds and lower solubility of sarcoplasmic and myofibrillar proteins than freeze-thawed pork (p<0.05). GFD had higher cooking loss than GFT in 2.0% NaCl, and lower hardness and a^* value of GFD were observed regardless of NaCl level (p<0.05). Moreover, GFD had higher malondialdehyde content than GFT at the two NaCl concentrations (p<0.05). Therefore, our study demonstrated that freeze-dried pork powder has lower functional properties than freeze-thawed pork as raw meat for comminuted meat products.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.21-48
• /
• 1974

The studies were carried out to disclose the physical and chemical properties of sericin fraction obtained from silk cocoon shells and its characteristics of swelling and solubility. The following results were obtained. 1. The physical and chemical properties of sericin fraction. 1) In contrast to the easy water soluble sericin, the hard soluble sericin contains fewer amino acids include of polar side radical while the hard soluble amino acid sach as alanine and leucine were detected. 2) The easy soluble amino acids were found mainly on the outer part of the fibroin, but the hard soluble amino acids were located in the near parts to the fibroin. 3) The swelling and solubility of the sericin could be hardly assayed by the analysis of the amino acid composition, and could be considered to tee closely related to the compound of the sericin crystal and secondary structure. 4) The X-ray patterns of the cocoon filament were ring shape, but they disappeared by the degumming treatment. 5) The sericin of tussah silkworm (A. pernyi), showed stronger circular patterns in the meridian than the regular silkworm (Bombyx mori). 6) There was no pattern difference between Fraction A and B. 7) X-ray diffraction patterns of the Sericin 1, ll and 111 were similar except interference of 8.85A (side chain spacing). 8) The amino acids above 150 in molecular weight such as Cys. Tyr. Phe. His. and Arg. were not found quantitatively by the 60 minutes-hydrolysis (6N-HCI). 9) The X-ray Pattern of 4.6A had a tendency to disappear with hot-water, ether, and alcohol treatment. 10) The partial hydrolysis of sericin showed a cirucular interference (2A) on the meridian. 11) The sericin pellet after hydrolysis was considered to be peptides composed with specific amino acids. 12) The decomposing temperature of Sericin 111 was higher than that of Sericin I and II. 13) Thermogram of the inner portioned sericin of the cocoon shell had double endothermic peaks at 165$^{\circ}C$, and 245$^{\circ}C$, and its decomposing temperature was higher than that of other portioned sericin. 14) The infrared spectroscopic properties among sericin I, II, III and sericin extracted from each layer portion of the cocoon shell were similar. II. The characteristics of seriein swelling and solubility related with silk processing. 1) Fifteen minutes was required to dehydrate the free moisture of cocoon shells with centrifugal force controlled at 13${\times}$10$^4$ dyne/g at 3,000 R.P.M. B) It took 30 minutes for the sericin to show positive reaction with the Folin-Ciocaltue reagent at room temperature. 3) The measurable wave length of the visible radiation was 500-750m${\mu}$, and the highest absorbance was observed at the wave length of 650m${\mu}$. 4) The colorimetric analysis should be conducted at 650mu for low concentration (10$\mu\textrm{g}$/$m\ell$), and at 500m${\mu}$ for the higher concentration to obtain an exact analysis. 5) The absorbing curves of sericin and egg albumin at different wave lengths were similar, but the absorbance of the former was slightly higher than that of the latter. 6) The quantity of the sericin measured by the colorimetric analysis, turned out to be less than by the Kjeldahl method. 7) Both temperature and duration in the cocoon cooking process has much effect on the swelling and solubility of the cocoon shells, but the temperature was more influential than the duration of the treatment. 8) The factorial relation between the temperature and the duration of treatment of the cocoon cooking to check for siricin swelling and solubility showed that the treatment duration should be gradually increased to reach optimum swelling and solubility of sericin with low temperature(70$^{\circ}C$) . High temperature, however, showed more sharp increase. 9) The more increased temperature in the drying of fresh cocoons, the less the sericin swelling and solubility were obtained. 10) In a specific cooking duration, the heavier the cocoon shell is, the less the swelling and solubility were obtained. 11) It was considered that there are differences in swelling or solubility between the filaments of each cocoon layer. 12) Sericin swelling or solubility in the cocoon filament was decreased by the wax extraction.. 13) The ionic surface active agent accelerated the swelling and solubility of the sericin at the range of pH 6-7. 14) In the same conditions as above, the cation agent was absorbed into the sericin. 15) In case of the increase of Ca ang Mg in the reeling water, its pH value drifted toward the acidity. 16) A buffering action was observed between the sericin and the water hardness constituents in the reeling water. 17) The effect of calcium on the swelling and solubility of the sericin was more moderate than that of magnecium. 18) The solute of the water hardness constituents increased the electric conductivity in the reeling water.

• Applied Biological Chemistry
• /
• v.40 no.1
• /
• pp.76-79
• /
• 1997

Several physicochemical properties such as water solubility, vapor pressure, hydrolysis and octanol/water partition coefficient(Kow) of flupyrazofos, the first organophosphorus insecticide developed in Korea, were measured based on EPA and OECD methods. Water solubility was low showing 0.80 ppm at $25^{\circ}C$ and in hydrolysis study, half-life at $25^{\circ}C$ was 266.5 hr(pH 4.0), 180.0 hr(pH 7.0) and 120.9 hr(pH 9.0) demonstrating instability in alkaline solution. At $40^{\circ}C$ hydrolysis rate was $2{\sim}4$ times higher than that at $25^{\circ}C$. The equation log P=0.673-(1565.4/T) was obtained from vapor pressure experiments at three different temperatures (25, 35, $45^{\circ}C$) and $2.81{\times}10^{-5}$ torr was obtained at $25^{\circ}C$. This value is similar to that of diazinon and 1,000 times lower than that of DDVP suggesting it would not give environmental contamination by volatilization. High log Kow(5.24) was observed and this might result in bioconcentration through food chain. However, its possibility is not likely to be high due to its relatively rapid hydrolysis.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.417-422
• /
• 2005

This study was aimed to design and formulate the moisture-activated patches containing ofloxacin and lidocaine for antibacterial and local anesthetic action. The solubility of lidocaine at $32^{\circ}C$ in various vehicles decreased in the rank order of PG $759.5{\pm}44.5\;mg/mL$ > PGL > IPM > PEG 300 > PEG 400 > Ethanol > PGMC > DGME > PGML > OA > $Captex^{\circledR}\;300$ > $Captex^{\circledR}\;200$ > water $(4.0{\pm}0.1\;mg/mL)$. Ofloxacin revealed very low solubility, which the highest solubility was obtained from PEG 400 $(18.7{\pm}6.3\;mg/mL)$ among the vehicles used. The addition of lactic acid increased the solubility of ofloxacin dramatically; the solubility at 5% lactic acid was $133.7{\pm}9.7\;mg/mL$. As $2-hydroxypropyl-{\beta}-cyclodextrin$ was added at the concentrations of 40, 80, 120, 160 and 200 mM, the solubilities of lidocaine and ofloxacin were enhanced up to three and two times, respectively, with concentration-dependent pattern. Gel intermediates for filmtype patches were prepared with mucoadhesive polymer, viscosity builders, lidocaine or ofloxacin at pH values from 5 to 7. Gels were cast onto a release liner and dried at room temperature. Dried patch was attached onto an adhesive backing layer, thus forming a patch system. Patches containing a single drug component were characterized by in vitro measurement of drug release rates through a cellulose barrier membrane. The release study was carried out at $37^{\circ}C$ using a Franz-type cell. Receptor solutions were isotonic phosphate buffers (pH 7.4). Samples $(100\;{\mu}L)$ were taken over 24 hours and quantitated by a verified HPLC method. The releases from all tested were proportional to the square root of time. The release rates were 0.9, 157.3 and $281.7\;{\mu}g/cm^{2}/min^{1/2}$ for the lidocaine patches and 19.8,37.2 and $50.7\;{\mu}g/cm^{2}/min^{1/2}$ for the ofloxacin patches at the concentrations of 0.3, 0.5 and 1 %, respectively. The release rates were dose dependent in both drug patches $(R^{2}\;=\;0.9077\;for\;lidocaine;\;R^{2}\;=\;0.9949\;for\;ofloxacin)$ and those were also thickness-dependent $(R^{2}\;=\;0.9246\;for\;lidocaine;\;R^{2}\;=\;0.9512\;for\;ofloxacin)$.