• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.299-305
• /
• 2006

Aromatic L-amino acid transaminase is an enzyme that is able to transfer the amino group from L-glutamate to unnatural aromatic ${\alpha}-keto$ acids to generate ${\alpha}-ketoglutarate$ and unnatural aromatic L-amino acids, respectively. Enrichment culture was used to isolate thermophilic Bacillus sp. T30 expressing this enzyme for use in the synthesis of unnatural L-amino acids. The asymmetric syntheses of L-homophenylalanine and L-phenylglycine resulted in conversion yields of >95% and >93% from 150 mM 2-oxo-4-phenylbutyrate and phenylglyoxylate, respectively, using L-glutamate as an amino donor at $60^{\circ}C$. Synthesized L-homophenylalanine and L-phenylglycine were optically pure (>99% enantiomeric excess) and continuously pre-cipitated in the reaction solution due to their low solubility at the given reaction pH. While the solubility of the ${\alpha}-keto$ acid substrates is dependent on temperature, the solubility of the unnatural L-amino acid products is dependent on the reaction pH. As the solubility difference between substrate and product at the given reaction pH is therefore larger at higher temperature, the thermophilic transaminase was successfully used to shift the reaction equilibrium toward rapid product formation.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.500-506
• /
• 2012

In this study, we developed and optimized hydrophilic polymer based solid dispersion formulations (SDs) for enhancing the aqueous solubility of eprosartan, one of poorly soluble drugs, that has been broadly used for the treatment of high blood pressure. Poly(ethylene glycol) (PEG) and poly(vinyl pyrrolidone) (PVP) based SDs were prepared by hot melting and solvent evaporation methods and the drug/polymer composition varied in the range of 1:1~1:5 with or without poloxamer 407 (P407) as a polymeric surfactant. The SDs prepared by solvent evaporation showed more reduced crystallinity than ones by hot melting, and PVP based SDs showed more enhanced solubility and lower crystallinity than PEG based SDs. Furthermore, it was observed from DSC and PXRD analysis that the SDs with P407 (drug:polymer: P407 = 1:5:1) demonstrated no crystallinity and the most enhanced solubility (more than 3~4 times).

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.342-353
• /
• 2003

This work is about the development of jet-fuel resistant PVC sealant using a polyester plasticizer. PVC copolymer was compounded with adipic acid glycol(Songcizer P-3000) or DOP plasticizers. Fuel-immersed and non-immersed penetration, solubility, flow, and elongation by tensile adhesion of PVC compounds were measured. Penetration increase by fuel immersion and solubility of PVC compounds with adipic acid glycol polyester plasticizer were smaller than those of PVC compounds with DOP plasticizer. Elongation by tensile adhesion test of PVC compound containing 500 phr of Songcizer P-3000 decreased proportionally to the content of DCDP (dicyclopentadiene) base petroleum resin adhesion promoter. Calcium carbonate($CaCO_3$) filler inhibited the diffusion of fuel in all the PVC compounds and decreased the solubility of PVC compounds containing Songcizer P-3000.

• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.1065-1080
• /
• 2023

The solubility and structure of myosin and the properties of pork gel with NaCl, KCl, CaCl₂, and MgCl₂ were investigated. Myofibrillar proteins (MPs) with phosphate were more solubilized with NaCl than with KCl (p < 0.05). CaCl₂ and MgCl₂ showed lower MP solubilities than those of NaCl and KCl (p < 0.05). The α-helix content of myosin was lower in KCl, CaCl₂, and MgCl₂ than in NaCl (p < 0.05). The pH of pork batter decreased in the order of KCl, NaCl, MgCl₂, and CaCl₂ (p < 0.05). The cooking yield of the pork gel manufactured with monovalent salts was higher than that of the pork gel manufactured with divalent salts (p < 0.05). The pork gel manufactured with KCl and MgCl₂ showed lower hardness than that of the pork gel manufactured with NaCl. The solubility and structure of myosin were different with the different chloride salts and those led the different quality properties of pork gel. Therefore, the results of this study can be helpful for understanding the quality properties of low-slat meat products manufactured by replacing sodium chloride with different chloride salts.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1208-1212
• /
• 2003

CaCO$_3$ powders were synthesized by aqueous solution reaction of CaC1$_2$ㆍ2$H_2O$-(NH$_4$)$_2$CO$_3$ system with NH$_4$OH at 45$^{\circ}C$ and pHs 8, 9, 10, and 11 and in the concentration range of 0.1∼5 M and its polymorphism, morphology and size were investigated. In order to investigate the influence of pH on nucleation, pH was adjusted before and after reaction respectively. When pH was adjusted after reaction a formation ratio of vaterite was increased with increasing pH and concentration but vaterite was formed with calcite. But, when pH was adjusted before reaction, the formation rate of vaterite was increased with increasing pH and concentration. resulting in a phase-pure vaterite with a spherical shape and 2∼5 $\mu\textrm{m}$ in size. It was found that solubility of alkaline vaterite was decreased with increasing OH- ions in the high pH solution. When pH was adjusted before nucleation in the high concentration range, in particular, decreasing of solubility disturbed transformation of initially formed numerous vaterite to calcite.

• Nuclear Engineering and Technology
• /
• v.14 no.4
• /
• pp.172-177
• /
• 1982

The state of Am in the concentration of 10$^{-5}$M has been studied in the pH range of 5 to 10 by filtration and centrifugation method. By the experiments, we could estimate possible Am hydrolysis products and solubility constants. If the solubility of Am (OH)$_3$ estimated by Baes and Mesmer is increased about a factor of 10, i.e. changing logk=-l8.7 to logk=-17 5 it was found that the calculated curve of Am concentration versus pH agreed completely with experimental values.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.3
• /
• pp.301-309
• /
• 2016

To facilitate the effective use of butter clam shell as a natural calcium resource, we determined the optimal conditions for calcium lactate (BCCL) preparation with high solubility using response surface methodology (RSM). The polynomial models developed by RSM for pH, solubility and yield were highly effective in describing the relationships between factors (P<0.05). Increased molar ratios of calcined powder (BCCP) from butter clam shell led to reduced solubility, yield, color values and overall quality. The critical values of multiple response optimization to independent variables were 1.75 M and 0.94 M for lactic acid and BCCP, respectively. The actual values (pH 7.23, 97.42% for solubility and 423.22% for yield) under optimization conditions were similar to the predicted values. White indices of BCCLs were in the range of 86.70–90.86. Therefore, organic acid treatment improved color value. The buffering capacity of BCCLs was strong, at pH 2.82 to 3.80, upon the addition of less than 2 mL of 1 N HCl. The calcium content and solubility of BCCLs were 6.2–16.7 g/100 g and 93.6-98.5%, respectively. Fourier transform analysis of infrared spectroscopy data identified BCCL as calcium lactate pentahydrate, and the analysis of microstructure by field emission scanning electron microscopy revealed an irregular form.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.4
• /
• pp.386-395
• /
• 2002

This study would like to measure and compare water sorption and solubility of acrylic resins, with 3 different polymerizing methods, and tensile strength between denture base resin and relining rosins. For this experiment, 3 different acrylic resins were used; heat polymerizing resin: Vertex (Dentmex, Zeist, Holland), autopolymerizing resin: Tokuso Rebase (Tokuyama Corp, Tokyo, Japan), and light curing resin: Mild Rebaron LC(GC Corp, Tokyo, Japan) The results were as follows ; 1. Tokuso Rebase showed the lowest water sorption. followed by Mild Rebaron LC and Vertex. Among resins, there were some signigicant differences (P<0.05). 2. Vertex showed the lowest solubility, followed by Mild Rebaron LC and Tokuso Rcbase. Among resins, there were some signigicant differences (P<0.05). 3. Intact Vertex showed the highest tensile strength, and Mild Rebaron LC had a more tensile strength than Tokuso Rebase. Between Vertex and the other resins, there were some signigicant differences (P<0.05) However, between Mild Rebaron LC and Tokuso Rebase, there was no statistical difference (P>0.05). About 50% of Rebaron LC showed cohesive fracture. 4. Tensile strength has more decreased after thermocycling than before, but there was no statistical difference (P>0.05).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.146-151
• /
• 2014

Objectives: Chrysotile is mineralogically distinct from amphiboles, displaying a notably different chemical structure. The thin sheets that form chrysotile fiber lead to the ability of the lung/macrophage system to decompose the chrysotile fibers. This study was performed in order to compare the physicochemical characteristics of Korean asbestos with those of Canadian amphiboles. Materials: An acid solubility test for each test substance was done to compare pH 4.5 and pH 1.2 distilled water. Asbestos fibers which had been placed in acid solutions for five days, five weeks and weeks were analyzed with a transmission electron microscope equipped with an energy dispersive X-ray spectrometer (TEM-EDS). Results: The composition element (Mg) of Korean chrysotile, Korean anthophyllite and Canadian amosite significantly decreased from 5 days and also decreased significantly after 5 weeks and 10 weeks. Only the composition (Mg) of Canadian crocidolite did not change under any conditions. From 5 days, the Mg of Korean chrysotile, Korean anthophyllite and Canadian amosite were significantly lower than before the acid treatment, but there were no changes over time or by the pH of the acid solutions. Particularly after 10 weeks, the composition (Mg) of Korean chrysotile in the pH 1.2 acid solution showed a rapid reduction of 15.86%. Conclusions: Korean chrysotile was very weak in an acid environment, beginning to show significant changes after 5 days. The Mg component rapidly decreased after 10 weeks in the pH 1.2 acid solution.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.867-874
• /
• 2009

Solubility of a radionuclide is important for defining the release source term of a radioactive waste in the safety and performance assessments of a radioactive waste repository. When the pH and redox potential of the KURT groundwater were changed by an electrical method, the concentrations of uranium and thorium released from $UO_2$(cr) and $ThO_2$(cr) at alkali pH(8.1 ${\sim}$ 11.4) and reducing potential (Eh < -0.2 V) conditions were less than $10^{-7}mole/L$. Unexpectedly, the concentration of tetravalent thorium is slightly higher than that of uranium at pH = 8.1 and Eh= -0.2 V conditions, and this difference may be due to the formation of hydroxide-carbonate complex ions. When $UO_2$(s) and $UO_2$(am, hyd.), and $ThO_2$(s) and $Th(OH)_4(am)$ were assumed as solubility limiting solid phases, the concentrations of uranium and thorium in the KURT groundwater calculated by the PHREEQC code were comparable to the experimental results. The dominating aqueous species of uranium and thorium were presumed as $UO_2(CO_3)_3^{4-}$ and $Th(OH)_3CO_3^-$ at pH = 8.1 ${\sim}$ 9.8, and $UO_2(OH)_3^-$ and $Th(OH)_4(aq)$ at pH = 11.4.