• 생태와환경
• /
• 제37권4호통권109호
• /
• pp.411-422
• /
• 2004

횡성호에서는 수중폭기 기간에도 수온약층이 형성되었으며, 수중폭기로 인한 영향이 크지 않은 것으로 판단된다. 모든 정점의 표충(0-5m)평균 탁도는 0.1-8.5NTU로 우기 이후에 중층 및 심층에서 높았다. 투명도는 0.9-3.5m의 범위로 댐 하류(St. 1)정점에서 크게 나타났으며, 상류로 갈수록 낮았다. 용존산소는 2000년 7월과 8월에 전 지점의 0m에서 $8.4-14.1\;mgO_2\;{\cdot}\;L^{-1}$로 높았으나 심층에서는 고갈 상태를 보였다. 또한 2001년 7월과 9월에도 정점 1의 심층에서 $1\;mgO_2\;{\cdot}\;L^{-1}$ 내외로 매우 낮았다. 전 정점의 표층 (0-5 m)평균 총인 농도는 5-46 mgP ${\cdot}$ $m^{-3}$로 초봄의 turnover 직후 및 우기이후에 높았으며 용존 무기인 농도는 0.2-13.2 mgP ${\cdot}$ $m^{-3}$로 2001년 9월을 제외하고는 대부분10mgp ${\cdot}$ $m^3$이하 이였다. 횡성호의 연간 인부하량은 약 4.45ton 정도로 유역내에서 발생되는 총인 발생량 71.34ton중 약 6.2%만이 호수내로 유입되는 것으로 나타났다. 수면적당 인부하량은0.77 gp ${\cdot}\;m^2\;{\cdot}\;yr^{-1}$으로 횡성호의 환경용량이라 할 수 있는 과잉임계부하량 0.72 gp ${\cdot}\;m^2\;.\;yr^{-1}$을 0.05 gP ${\cdot}\;m^2\;.\;yr^{-1}$ 초과한 수준이다. 전 정점 표층 (0-5 m)평균 총질소 농도는 0.83-3.55 mgN ${\cdot}\;L^{-1}$로 우기 이후에 중충 이하 지역에서 높았다. 질산성 질소는 전 정점의 표층(0-5m)평균이 0.09-3.33 mgN ${\cdot}\;L^{-1}$로 2001년 6월에 가장 낮았다. 암모니아성 질소는 전 정점의 표층(0-5m)평균이 0.04-0.23 mgN ${\cdot}\;L^{-1}$이였다. 전 정점 표층 (0-5 m)평균 규소농도는 0.5-9.6 mgSi ${\cdot}\;L^{-1}$로 봄철에 낮았으며, 우기이후에 다시 증가하였다. 평균 TSI는 2000년과 2001년에 각각 59와 57이었다. 전 정점 표층 (0-5 m)평균 엽록소 a농도는 0.3-32.4 mg ${\cdot}\;m^{-3}$로 여름철에 높은 경향을 보였으며, 정점별로는 상류지역에서 높았다. 식물플랑크톤은 2000년 7월에 녹조류인 Scenedesmus sp.가 10,480 cells ${\cdot}\;mL^{-1}$,8월과 9월에는 남조류인 Microcystis sp.가 각각 3,492와 296 cells ${\cdot}\;mL^{-1}$로 우점하였다. 10월에는 녹조류인 Coelastrum microporum이 133 cells ${\cdot}\;mL^{-1}$, 11월에는 규조류인 Asterionella formosa가 2,654 cells ${\cdot}\;mL^{-1}$, 12월에는 규조류인 .Aulacoseira granulata가 29 cells ${\cdot}\;mL^{-1}$우점종이였다. 특히 2000년 여름철에 우점종이였던 남조류가 2001년에는 출현하지 않았으며 종 다양성 (diversity)지수는 2000년 7월에 2.22로 가장 높았으며, 생물량도 조사기간중 36,640 cells ${\cdot}\;mL^{-1}$로 가장 많았다.

• 한국농공학회지
• /
• 제45권7호
• /
• pp.57-69
• /
• 2003

To evaluate nutrient dynamics with different fertilization in paddy field and develop water quality model, mass balance analysis was performed during growing season of 2001-2002 in field experimental plots irrigated with groundwater. As a result of water balance analysis, most of outflow was surface drainage as about half of total outflow and about 500mm was lost by evapotranspiration. The water budget was well balanced. The runoff from paddy field was influenced by rainfall and forced drain. Especially runoff during early cultural periods more depends on the forced drain. As a result of mass balance analysis, most of nutrient was input by fertilization and lost by plant uptake. Significant amount of nitrogen were supplied by precipitation and input from upper paddy field, comprising 12%∼28% of total inflow. Nutrient loading by surface drainage was occurred showing about 15%∼29% for T-N and 6%∼13% for T-P. The response of rice yield with different fertilization was not significant in this study. Water quality model for paddy field developed using Dirac delta function and continuous source was calibrated and validated to surface water quality monitoring data. It demonstrates good agreement between observed and simulated. The nutrient concentration of surface water at paddy field was significantly influenced by fertilization. During early cultural periods when significant amount of fertilizer was applied, surface drainage from paddy field can cause serious water quality problem. Therefore, reducing surface drainage during fertilization period can reduce nutrient loading from paddy fields. Shallow irrigation, raising the weir height in diked rice fields, and minimizing forced surface drainage are suggested to reduce surface drainage outflow.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.322-330
• /
• 2005

Statement of problem. In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress. Purpose. The purpose of this study was to investigate the biomechanical effects of mandibular removable partial dentures with various prosthetic designs using strain gauge analysis. Material and methods. Artificial teeth of both canines were anchored bilaterally in a mandibular edentulous model made of resin. Bilateral distal extension removable partial dentures with splinted and unsplinted abutments were fabricated. Group 1 : Clasp-retained mandibular removable partial denture with unsplinted abuhnents Group 2 : Clasp-retained mandibular removable partial denture with splinted abutments by 6-unit bridge Group 3 : Bar-retained mandibular removable partial denture Strain gauges were bonded on the labial plate of the mandibular resin model, approximately 2 mm close to the abutments. Two vertical experimental loadings (100N and 200N) were applied subsequently via two miniature load cells that were placed at mandibular first molar regions. Strain measurements were performed and simultaneously monitored from a computer connected to data acquisition system. For within-group evaluations, t-test was used to compare the strain values and for between-group comparisons, a one-way analysis of variance (ANOVA) was used and Duncan test was used as post hoc comparisons. Results. Strain values increased as the applied load increased from 100N to 200N for all groups (p<.05). The strain values of group 1 and 2 were tensile under loadings. In contrast, strain values of group 3 were compressive in nature. Under 100N loading, group 1 showed higher strain values than group 3 in absolute quantity (p<.05). Under 200N loading, group 3 showed higher strain values than group 1 and 2 in absolute quantity (p<.05). Group 1 showed higher strain values than group 2 (p<.05). Conclusion. Splinting of two isolated abutments by bridge reduced the peri-abutment strain in comparison with unsplinted abutments. Strain of bar-retained removable partial denture increased much more as applied load increased, but was compressive in nature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.220-225
• /
• 2004

The mesh-insensitive structural stress procedure by Dong is modified to apply to the welded joints with local thickness variation and inignorable shear/normal stresses along local discontinuity surface. In order to make use of the structural stress based K solution for fatigue correlation of welded joints, a proper crack growth model needs to be developed. There exist some significant discrepancies in inferring the slope or crack growth exponent in the conventional Paris law regime. Two-stage crack growth model was not considered since its applications are focused upon the fatigue behavior in welded joints in which the load ratio effects are considered negligible. In this paper, a two-stage crack growth law considering high mean loading is proposed and proven to be effective in unifying the so-called anomalous short crack growth data.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.369-382
• /
• 2014

A growing dynamic electrical demand has created an increasing interest in utilizing nonconventional energy sources like Photovoltaic (PV), wind power, etc. In this context, this paper focuses on the design and development of a composite power controller (CPC) in the decoupled double synchronous reference frame (DDSRF) combining the advantages of direct power control (DPC) and voltage oriented control (VOC) for a PV sourced grid connected inverter. In addition, a controller with the inherent active filter configuration is tested with nonlinear and unbalanced loads at the point of common coupling in both grid connected and autonomous modes of operation. Furthermore, the loss and reactive power compensation due to a non-fundamental component is also incorporated in the design, and the developed DDSRF model subsequently allows independent active and reactive power control. The proposed developed model of the controller is also implemented using MATLAB-Simulink-ISE and a Xilinx system generator which evaluate both the simulated and experimental setups. The simulation and experimental results confirm the validity of the developed model. Further, simulation results for the DPC are also presented and compared with the proposed CPC to further bring out the salient features of the proposed work.

• Steel and Composite Structures
• /
• 제14권2호
• /
• pp.173-190
• /
• 2013

The major objective of this paper is to evaluate the behavior and ultimate resisting capacity of circular CFT columns. To consider the confinement effect, proper material models with respect to the confinement pressure are selected. A fiber section approach is adopted to simulate the nonlinear stress distribution along the section depth. Material nonlinearity due to the cracking of concrete and the yielding of the surrounding steel tube, as well as geometric nonlinearity due to the P-${\Delta}$ effect, are taken into account. The validity of the proposed numerical analysis model is established by comparing the analytical predictions with the results from previous experimental studies about pure bending and eccentric axial loading. Numerical predictions using an unconfined material model were also compared to investigate the confinement effects on various loading combinations. The ultimate resisting capacities predicted by the proposed numerical model and the design guidelines in Eurocode 4 are compared to evaluate the existing design recommendation.

• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.59-73
• /
• 2017

3차원 유한요소 프로그램(PLAXIS 3D)를 이용한 수치해석을 통하여 동적표면하중 하에서지반-말뚝 구조물의 상호작용을 평가하였다. 수치해석에 의한 진동대 실험 형태의 하중조건 및 지반시스템에 대한 동적 p-y곡선을 산정하고 이를 통하여 말뚝-지반의 조건, 말뚝의 선단부 조건, 재하조건 등을 고려하여 매개변수 연구를 하였다. 그 결과 주파수 1.4Hz 입력 진동수가 모형 말뚝-지반 시스템의 고유진동수 1.4Hz와 거의 일치하여 공진 현상이 발생하여서 다른 진동수의 결과와 비교시 다른 p, y 값을 보이고 있다. P-y 곡선에서 이를 대표할 수 있는 경향선을 나타내는 3차 다항함수로 표현하여 결과를 정리하였다. 특히 단독 말뚝의 경우 지배적인 곡선의 형태가 수학적인 증명을 통해 타원(ellipse)임을 밝혀냈다. P-y곡선의형태가 타원인 경우는 타원 방정식을 직접 지반-구조물의 동적설계나 해석에 이용하는 것이 바람직하다고 판단된다.

• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.951-960
• /
• 2007

Window interface to Hydrological Simulation Program-FORTRAN (WinHSPF) developed by the United States Environmental Protection Agency (EPA) was applied to the upstream of Nam-Han river watershed to examine its applicability for loading estimates in watershed scale and to evaluate non-point source control scenarios using BMPRAC in WinHSPF. The WinHSPF model was calibrated and verified for water flow using Ministry of Construction and Transportation (MOCT, 3 stations, 2003~2005) and water qualities using Ministry of Environment (MOE, 5 station, 2000~2006). Water flow and water quality simulation results were also satisfactory over the total simulation period. But outliers were occurred in the time series data of TN and TP at some regions and periods. Therefore, it required more profit calibration process for more various parameters. As a result, all the study was performed within the expectation considering the complexity of the watershed, pollutant sources and land uses intermixed in the watershed. The estimated pollutant load for annual average about $BOD_5$, T-N and T-P respectively. Nonpoint source loading had a great portion of total pollutant loading, about 86.5~95.2%. In WinHSPF, BMPRAC was applied to evaluate non-point source control scenarios (constructed wetland, wet detention ponds and infiltration basins). All the scenarios showed efficiency of non-point source removal. Overall, the HSPF model is adequate for simulating watersheds characteristics, and its application is recommended for watershed management and evaluation of best management practices.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.219-237
• /
• 2003

he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.