• Journal of Periodontal and Implant Science
• /
• 제54권3호
• /
• pp.189-204
• /
• 2024

Purpose: This pilot study was conducted to develop a novel test setup for the in vitro assessment of the primary stability of dental implants. This was achieved by characterising their long-term behaviour based on the continuous recording of micromotions resulting from dynamic and cyclic loading. Methods: Twenty screw implants, each 11 mm in length and either 3.8 mm (for premolars) or 4.3 mm (for molars) in diameter, were inserted into the posterior region of 5 synthetic mandibular models. Physiological masticatory loads were simulated by superimposing cyclic buccal-lingual movement of the mandible with a vertically applied masticatory force. Using an optical 3-dimensional (3D) measuring system, the micromotions of the dental crowns relative to the alveolar bone resulting from alternating off-centre loads were concurrently determined over 10,000 test cycles. Results: The buccal-lingual deflections of the dental crowns significantly increased from cycle 10 to cycle 10,000 (P<0.05). The deflections increased sharply during the first 500 cycles before approaching a plateau. Premolars exhibited greater maximum deflections than molars. The bone regions located mesially and distally adjacent to the loaded implants demonstrated deflections that occurred synchronously and in the same direction as the applied loads. The overall spatial movement of the implants over time followed an hourglass-shaped loosening pattern with a characteristic pivot point 5.5±1.1 mm from the apical end. Conclusions: In synthetic mandibular models, the cyclic reciprocal loading of dental implants with an average masticatory force produces significant loosening. The evasive movements observed in the alveolar bone suggest that its anatomy and yielding could significantly influence the force distribution and, consequently, the mechanical behaviour of dental implants. The 3D visualisation of the overall implant movement under functional cyclic loading complements known methods and can contribute to the development of implant designs and surgical techniques by providing a more profound understanding of dynamic bone-implant interactions.

• 대한치과보철학회지
• /
• 제43권2호
• /
• pp.248-257
• /
• 2005

Statement of problem. Cortical bone plays an important role in the primary implant stability, which is essential to immediate/early loading. However, immediate load-bearing capacity and primary implant stability according to the change of the cortical bone thickness have not been reported. Purpose. The objectives of this study were (1) to measure the immediate load-bearing capacity of implant and primary implant stability according to the change of cortical bone thickness, and (2) to evaluate the correlation between them. Material and methods.48, screw-shaped implants (3.75 mm$\times$7 mm) were placed into bovine rib bone blocks with different upper cortical bone thickness (0-2.5 mm) and resonance frequency (RF) values were measured subsequently. After fastening of healing abutment. implants were subjected to a compressive load until tolerated micromotion threshold known for the osseointegration and load values at threshold were recorded. Thereafter, RF measurement after loading, CT taking and image analysis were performed serially to evaluate the cortical bone quality and quantity. Immediate load-bearing capacity and RF values were analyzed statistically with ANOVA and post-hoc method at 95% confidence level (P<0.05). Regression analysis and correlation test were also performed. Results. Existence and increase of cortical bone thickness increased the immediate load-bearing capacity and RF value (P<0.05) With the result of regression analysis, all parameter's of cortical bone thickness to immediate load-bearing capacity and resonance frequency showed significant positive values (P<0.0001). A significant high correlation was observed between the cortical bone thickness and immediate load-beating capacity (r=0.706, P<0.0001), between the cortical bone thickness and resonance frequency (r=0.753, P<0.0001) and between the immediate load-bearing capacity and resonance frequency (r=0.755, P<0.0001). Conclusion. In summary, cortical bone thickness change affected the immediate load-baring capacity and the RF value. Although RF analysis (RFA) is based on the measurement of implant/bone interfacial stiffness, when the implant is inserted stably, RFA is also considered to reflect implant/bone interfacial strength of immediately after placement from high correlation with the immediate load-baring capacity. RFA and measuring the cortical bone thickness with X-ray before and during surgery could be an effective diagnosis tool for the success of immediate loading of implant.

• 생태와환경
• /
• 제35권4호통권100호
• /
• pp.249-256
• /
• 2002

안동호에서 1993년부터 2000년까지 영양상태와 인부하량의 장기적인 변화를 조사하였다. 조사항목은 탁도, 수온, 투명도, 인, 질소 및 엽록소 a 농도 등이며, 댐 앞지점에서 월 1회 조사하였다. 유역으로부터의 인부하량은 주 유입수에서 주 1회 혹은 우기시 수시로 조사된 자료와 유입수량으로부터 산출하였다. 양어장으로부터의 인부하량은 사료공급량과 원단위로부터 산출하였다. 여름에 히소투명도 값이 1993년과 1994년에는 약 2m정도이었으나, 1998년에는 약 1m를 보였다. 표충의 총인 농도는 1993년에 $11-30\;mgP/m^3$에서 1998년에는 $18-42\;mgP/m^3$으로 약간 증가하였다. 그러나 2000년에는 $8-13\;mgP/m^3$으로 회복되었다. 표층의 총질소는 1993년에 1.81-2.96 mgN/L에서 2000년에는 1.17-1.80 mgN/L로 약간 감소하였다. TN/TP비는 1993년에 82-281이었으나 1998년에는 21-143로 감소하였다. 그러나 2000년에는 TP의 감소에 따라 101-209로 다시 증가하였다. 여름에 엽록소 a 농도는 1993년부터 1997년까지 $4.8-16.2\;mg/m^3$의 범위를 보였으나 1998년 이후에는 $3.7-5.2\;mg/m^3$으로 다소 감소되었다. 안동호의 영양상태는 1996년까지 점차적으로 증가되어왔으나 그 이후 감소되고 있는 것으로 나타났다 영양상태 회복의 주요 요인은 1998년 4월에 양어장의 철거에 따른 것으로 판단된다.

• 대한토목학회논문집
• /
• 제38권4호
• /
• pp.567-578
• /
• 2018

본 연구는 기존에 동적하중에 의한 군말뚝의 응력감소효과를 알아보기 위하여 동적 p-y곡선을 수립하고, 이를 통하여 동적 p-승수를 산정하고자 하였다. 이를 위하여 건조 사질토 지반에서 $2{\times}2$ 군말뚝, 단말뚝 및 $5{\times}5$ 군말뚝, 단말뚝에 대해 말뚝-지반시스템 하부에 정현파를 입력, 동적 수치해석을 수행하였다. 이때 군말뚝의 경우, 말뚝의 중심간격을 말뚝 지름의 2.5배, 5.0배로 변화시켜 해석을 실시하였다. 동적 수치해석결과에 따라 단말뚝과 군말뚝의 동적 p-y 곡선을 작성 및 비교를 하여, 말뚝 중심 간격 및 군말뚝 말뚝의 열위치에 따른 말뚝의 동적 군말뚝 효과를 분석하였다. 해석 결과 동적 p-승수 값은 좌표원점을 기준으로 대칭성을 보였으며, 그 값은 $5{\times}5$ 군말뚝(말뚝간격=2.5D), 단말뚝의 경우 군말뚝의 말뚝번호 3, 말뚝번호 23에서 0.26 ~ 0.30, 말뚝번호 13에서 0.14, 말뚝번호 8, 말뚝번호 18에서 0.07 ~ 0.14로 나타났다. 이 값들은 특히 하중조건이 달라서 정적 p-승수와 차이를 보였으며, 향후 다양한 종류의 입력 동하중을 통한 동적 p-승수($P_{dm}$) 산정을 통해 토목기초 구조물의 군말뚝-지반 시스템의 동적설계나 해석에 이용하는 것이 바람직하다고 판단된다.

• 한국지반공학회논문집
• /
• 제27권7호
• /
• pp.47-57
• /
• 2011

수평하중을 받는 말뚝기초의 설계를 위하여 p-y 곡선을 이용한 해석법이 널리 사용되고 있다. 이 때, 토질 및 기초특성에 적합한 p-y 곡선의 선정이 중요함에도 불구하고 현재 p-y 곡선에 대한 연구는 매우 부족한 실정이다. 본 연구에서는 3차원 수지해석을 프로그램을 이용하여 점성토 지반에 근입된 현장타설말뚝에 대한 p-y 곡선을 산정하였다. 먼저 현장재하시험으로부터 얻어진 단일말뚝의 p-y 곡선과 수치해석으로부터 얻어진 p-y 곡선을 비교하여 수치 모델링을 검증하였다. 그리고, 단일말뚝에 대하여 말뚝직경, 말뚝 탄성계수, 말뚝두부 구속조건, 그리고 무리말뚝에 대하여 말뚝간격을 변화시거며 매개변수 연구를 수행하였다. 최종적으로, 단일발뚝과 무리발뚝의 p-y 곡선을 비교하여 무리말뚝 효과를 나타내는 p-multiplier를 산정하였다. 그 결과, 말뚝간격 3D의 p-multiplier 값은 첫 번째 열 0.86, 가운데 열 0.69, 마지막 열 0.77로서 기존에 제안된 O'Neill and Reese의 결과와 유시한 것으로 나타났다. 말뚝간격 6D 이상인 경우 무리말뚝 효과는 무시할 수 있는 것으로 나타났다.

• 대한간호학회지
• /
• 제42권5호
• /
• pp.689-698
• /
• 2012

Purpose: This study was done to develop and evaluate a drug dosage calculation training program using cognitive loading theory based on a smartphone application. Calculation ability, dosage calculation related self-efficacy and anxiety were measured. Methods: A nonequivalent control group design was used. Smartphone application and a handout for self-study were developed and administered to the experimental group and only a handout was provided for control group. Intervention period was 4 weeks. Data were analyzed using descriptive analysis, ${\chi}^2$-test, t-test, and ANCOVA with the SPSS 18.0. Results: The experimental group showed more 'self-efficacy for drug dosage calculation' than the control group (t=3.82, p<.001). Experimental group students had higher ability to perform drug dosage calculations than control group students (t=3.98, p<.001), with regard to 'metric conversion' (t=2.25, p =.027), 'table dosage calculation' (t=2.20, p =.031) and 'drop rate calculation' (t=4.60, p<.001). There was no difference in improvement in 'anxiety for drug dosage calculation'. Mean satisfaction score for the program was 86.1. Conclusion: These results indicate that this drug dosage calculation training program using smartphone application is effective in improving dosage calculation related self-efficacy and calculation ability. Further study should be done to develop additional interventions for reducing anxiety.

• 한국환경보건학회지
• /
• 제18권2호
• /
• pp.67-74
• /
• 1992

The lab-scale biological A$_{2}$O system was applied from treating piggery wastewater highly polluted organic material which nitrogen and phosphorous are much contained relatively in conversion with other wastewater. The objective of this study was to investigate the effect of variance parameters on the treatability of this system according to operation conditions. An obtained experimental data were analysed by using principal component analysis (PCA) method. The results are summarized as follows: 1. From Varimax rotated factor loading in raw wastewater, variance of factor 1 was 36.8% and cumulative percentage of variance from factor 1 to factor 4 was 81.5% and of these was related to BOD, TKN and BOD loading. 2. In anaerobic process, variance of factor 1 was 33.5% and cumulative percentage of variance from factor I to factor 4 was 81.8% and of these was related to PO$_{4}$-P, BOD, DO and Temperature. 3. In anoxic process, variance of factor 1 was 30.1% and cumulative percentage of variance from factor i to factor 4 was 84.3% and of these was related to pH, DO, TKN and temperature. 4. In aerobic process, variance of factor 1 was 43.8% and cumulative percentage of variance from factor 1 to factor 4 was 81.5% and of these was highly related to DO, PO$_{4}$-P and BOD. 5. It was better to be operated below 0.30 kg/kg$\cdot$day F/M ratio to keep over 90% of BOD and SS, 80% of TKN, and 60% of PO$_{4}$-P in treatment efficiencies. 6. Treatment efficiencies was over 93% of BOD and SS, 81% of TKN and 60% of PO$_{4}$-P at over 20$^{\circ}$C, respectively.

• 한국환경보건학회지
• /
• 제34권6호
• /
• pp.423-432
• /
• 2008

In this study, we investigated the possibility of auto control and the proper operating factors in the BNR(Biological Nutrient Removal) process using an NADH(Reduced Nicotinamide Adenine Dinucleotide) fluorometer, which characterized the emitted fluorescence when activated by flashes of UV light at 460 nm. In terms of finding adequate operating parameters, results indicted that nitrification efficiency decreased in the controlled DO while denitrification efficiency decreased in the controlled pH. The above results indicated that controlled operating condition after combination with NADH, DO and pH was resonable. Result obtained from the correlation between NADH and pH showed that variation trend of influent loading was similar to those of NADH and pH, and also the variation cycle was repeated on a daily basis. Consequently, this result showed the increase of BOD loading caused the nitrification efficiency to decrease because air-flow, required for nitrification, was reduced, and so the NADH value was increased. From these results, it is possible to use NADH flourimetry to assess the variation of organic load and nitrification efficiency in the case of small change in influent pH such as in sewage and also to handle and operate the load variation in the auto control system using the NADH fluorometer.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.250-257
• /
• 2006

The objective of this study is to propose an alternative process for the small sewage treatment plants in rural communities. A biofilter has been used for biological wastewater treatment, which is becoming the alternative to the conventional activated sludge system. The proposed process used in this study, which is packed with floating media (i.e. expanded polystylene), has advantages of biofilter system and alternative flow system and they are incorporated into one process. Pilot and bench scale studies were performed using domestic wastewater. In the results of pilot plant study, it was observed that the stable effluent water quality was achieved and it met the present effluent criteria of suspended solid (SS), organic matters, T-N and T-P. In the study for determination of the cycle of backwashing, it was observed that the cycle of backwashing depended on BOD loading rates of influents. In the BOD loading rates of $0.5kg\;BOD/m^3{\cdot}day$ and $1.0kg\;BOD/m^3{\cdot}day$, the backwashing cycle of 28 hour and 16 hour were needed, respectively. The optimum backwashing time was 120~80 seconds at the media expansion rate of 50%. In the removal of SS, organic matters, T-N and T-P, SS removal was rather achieved by physical filtration than biological mechanism and the removal of organic matters except for SS, T-N and T-P were mainly rather achieved by biological mechanism than physical filtration. In bench-scale study, the effects of recirculation rate was investigated on removal of SS, TCOD, T-N and T-P. It was observed that the recirculation made removal efficiencies of SS, TCOD, T-N and T-P increased. Especially, in T-N removal, the increase of T-N removal efficiency of 40% was observed in the reicirculation rate of 1Q compared with 0Q.

• 생명과학회지
• /
• 제18권12호
• /
• pp.1775-1778
• /
• 2008

본 연구는 태권도 전문 기능화 개발을 위한 제안으로서 고급기술의 사용과 기능을 고려하여 회전력이 강화된 전문태권도화의 운동역학적인 특징을 분석하고자 하였다. 연구방법은 2가지 태권도화 종류를 이용하여, 텐션마찰계수 측정계와 지면반력기를 이용하여 얻은 결론은 다름과 같다. 정적마찰계수 비교는 A사 0.60, M사 0.61로 나타났다. 모멘트(회전 마찰력) 비교는 M사 태권도화가 회내(3.23Nm), 회외(2.70Nm) 모두 A사 태권도화 회내(3.20Nm), 회외(2.62Nm) 보다 높게 나타났다. 지면반력 비교는 Fz의 값은 세가지 조건에서 각각 유의한 차이가 있는 것으로 나타났으며(p<0.05), Fy의 최고의 힘은 세가지 조건에서 유의한 차이가 없는 것으로 나타났다. Fx 보다 앞서 나타나는 피크의 형태를 보여주고 있다.