• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.125-140
• /
• 2011

The remnant of temporary cement on the intaglio surface of cast restoration may have a negative effect on the retentive strength of permanent cement. This study was to evaluate the effect of temporary cement cleaning methods on the retentive strength of cementation type implant prostheses. Prefabricated implant abutments - height 5.5mm, diameter 4.5mm, 6 degree axial wall taper with chamfer margins were used. Forty copings-abutment specimens were divided into four groups(each n=10) according to the cleaning methods for temporary cement(Temp-$Bond^{(R)}$) as follows : no temporary cementation(the control group), orange solvent, ultrasonic cleaning, air borne-particle abrasion. After the application of temporary cement and the separation, the cleaning procedure was performed according to the protocol of each group. The specimens were cemented with $Premier^{(R)}$ Implant $Cement^{TM}$. After the permanent cementation, the specimens were subjected to thermocycling and pulled out from the specimens with a universal testing machine at a cross-head speed of 0.5mm/min. After the retentive strength test, all the specimens were cleaned using ultrasonic cleaning, abraded with air borne-particles, and steam-cleaned. Likewise, the specimens were temporarily cemented(Temp-$Bond^{(R)}$ NE), cleaned according to the protocol of each group, cemented with $Premier^{(R)}$ Implant $Cement^{TM}$ and subjected to thermocycling and measurement of their retentive strength. The mean of group with orange solvent were significantly lower than those of other groups(p<0.05). There was no significance between group with ultrasonic cleaning and group with air borne-particle abrasion. Group with ultrasonic cleaning and group with air-particle abrasion were no significance at control group. There was no significance between group cemented with Temp-$Bond^{(R)}$ and group cemented with Temp-$Bond^{(R)}$ NE. Within the limitation of this study, it can be concluded that the temporary cement cleaning method with only orange solvent may have a negative effect on the retentive strength of permanent cement. Ultrasonic cleaning and air borne-particle abrasion methods are recommended for the temporary cement cleaning method on cementation type implant prostheses.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.63-70
• /
• 2021

Radiographic contrast agents are used for diagnostic purposes and are one of the factors affecting measured values in bone density tests. They are absorbed into tissues and have an effect of increasing the measured values of bone density, so they are avoided as much as possible before performing a bone density test. MRI contrast agents, which have different physical properties and mechanisms of action than radiographic contrast agents, are based on gadolinium, a metal element. They have radiopacity characteristics, so MRI are generally performed prior to examination using radiation. The purpose of this study was to investigate the effects of MRI contrast agents on bone mineral density examination using dual energy X-ray absorption. Two types of gadolinium based MRI contrast agents were injected into an acrylic water tank for each volume, and the humanoid spine phantom was inserted and the BMD and T-score from (L1-L4) were analyzed by scanning a total of 30 times, 5 times for each injection type. The average value of the measured total (L1-L4) bone density for each of the two contrast agents was 0.952±0.052, 0.957±0.050, and 0.956±0.05g/㎠, respectively, for the Gadoterate Meglumine component 0mL, 7.5mL and 15mL, when the gadobutrol components were 0mL, 5mL, and 10mL, there was no statistically significant difference at all sites at 0.953±0.001, 0.954±0.001, and 0.945±0.001g/㎠, respectively(p>0.05). The average value of total T-score was -0.46±0.05, -0.4±0, -0.42±0.04 when the Gadoterate Meglumine component was 0mL, 7.5mL and 15mL, respectively. When the Gadobutrol ingredients were 0mL, 5mL and 10mL, there was no statistically significant difference in all areas, with -0.46±0.05, -0.46±0.05, and 0.5±0.00, respectively. In this experiment, the MRI contrast agent was found to have no effect on bone density tests, using the dual-energy X-ray absorption method. There is a limitation in that physical conditions such as kidney and health conditions etc. were not taken into consideration, so further clinical research is expected to be conducted in the future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.6
• /
• pp.729-737
• /
• 2008

The purposes of this study were to investigate supporting status and subsidy for school food service and to analyze the perception of school food service officials at the educational board on using rice bread to the school food service menu. The questionnaire was developed by content analysis, situation analysis, in-depth interview and checked by the school food service officials at the educational board. The questionnaires were responded by 33 officials (respondent rate: 86.8%) during September 1 to October 26 in 2007. The major findings of this study were as follows: First, most of the respondents were women (93.9%), and worked an average of 104.36 months at school-related work. The metropolitan & provincial office of education had prevalently jurisdiction over 272.3 rural and self-operation type of elementary schools, 115.50 rural and self-operation type of middle schools and 73.0 rural and self-operation type of high schools. In the case of the district office of education, 23.3 urban and self-operation type of elementary schools, 11.6 urban and self-operation type of middle schools and 5.3 urban and contracted type of high schools were averagely managed. Second, all the respondents supported meal cost for low-income group and 50.5% provided reimbursement for organic environmental agricultural products. The highest subsidy was 16.8 billion won as meal cost for low-income group in metropolitan & provincial office and 1,050 million won as labor cost in district office. Third, the experience of performing policies for using rice was relatively lower than perception of rice bread application to school food service menu. Fourth, the advantages of using rice bread were acceleration of consuming rice (32.0%), excellence of nutrition (24.0%) and promotion of healthy image (22.7%). On the other hand, the difficulties of using rice bread were lack of facilities (72.7%), higher cost compared to wheat bread (54.5%), limitation of menu application and cooking method (15.7% each). Fifth, the opinion of utilizing rice and that of applying rice bread were significantly correlated (p<0.001). Desirability and willingness were correlated with reality for applying rice bread to the school food service menu (p<0.001). Also, comparative analysis between divided groups by perception of utilizing rice showed that willingness and experience were significantly different.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.276-283
• /
• 2013

Purpose: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. Materials and methods: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (${\alpha}=.05$). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. Results: The pre-loading reverse torque values were $26.0{\pm}0.30Ncm$ (ready-made abutment; Transfer abutment) and $26.3{\pm}0.32Ncm$ (CAD-CAM custom-made abutment; CustomFit abutment) and $24.7{\pm}0.67Ncm$ (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. Conclusion: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.

• Journal of Chest Surgery
• /
• v.35 no.1
• /
• pp.27-35
• /
• 2002

Background: A perioperative myocardial infarction(PMI) is one of the major complications after CABG. Among diagnostic methods of PMI, CK-MB activity assays have been increasingly replaced by CK-MB mass assays, which have more sensitive, simple measurement. Also, new cardiac-specific and -sensitive marker, cardiac troponin I(cTnl), has been shown to be a marker of myocardial infarction. We report our evaluation of clinical significance of CK-MB mass and cTnl as a marker of PMI after CABG. Material and Method: We studied 32 patients who underwent CABG at Kangdong Sacred Hospital between April 2000 and April 2001. Postoperative serum CK-MB activity level, serum CK-MB mass, cTnl, electrocardiogram, echocardiogram, and clinical data were recorded prospectively The diagnosis of PMI was defined as positive 2 among 3 or all of the following , by a new Q wave on the electrocardiogram, by serum CK-MB activity higher than 200 lU/L within 72 hours after operation, and by new regional wall motion abnormality on the echocardiogram. Result: After CABG, 3 patients had sustained a PMI according to current diagnostic criteria. As serum CK-MB activity time course, a level of CK-MB activity 12 hours after CABG had very linear correlated significance with serum CK-MB mass 24hours(R=0.946) and cTnl 48 hours(R=0.933) after CABG(p=0.000). As we used a receiver operating characteristics curve(ROC curve) for a diagnostic cutoff value in patients with PMI, serum CK-MB mass levels higher than 30.05 ug/L 24 hours after CABG detected the presence of PMI with an area under the ROC curve of 1.0, a sensitivity of 100%, a specificity of 100%, a positive predictive value of 100%, and a negative predictive value of 100%. Also serum cTnl levels higher than 17.15 ug/L 48 hours after CABG detected the presence of PMI with an area under the ROC curve of 0.98, a sensitivity of 100%, a specificity of 96.6%, a positive preclictive value of 75%, and a negative predictive value of 100% Conclusion: We concluded that both the measurement of CK-MB mass and cTnl are the easier, accurate methods as a diagnostic marker of PMT after CABG, also as a proposal of diagnostic cutoff value enables to an early detection of PMI. However, a 1arger number of patient will be needed because of statistic limitation that a small number of participating patients, a small number of PMI.

• Clinical and Experimental Pediatrics
• /
• v.50 no.12
• /
• pp.1188-1193
• /
• 2007

Purpose : The prevalence of rickets in the world is on the rise not only in developing but also in developed countries. In Korea, breastfeeding has increased. There have been few studies on the possible association of rickets with breastfeeding. The purpose of this study was to identify the development and the clinical presentation of subclinical rickets in breastfed infants. Methods : We investigated patients who were breastfed and had hypovitaminosis D in the blood from May 2006 to April 2007, and who were diagnosed with vitamin D deficient rickets from May 2003 to April 2006. We evaluated the results of blood tests, x-rays and other relevant information in the medical record. A questionnaire that included questions on the diet of patients, the mothers activity during pregnancy and place of residence was administered. Results : Twelve patients (66%: male, 34%: female) were enrolled in this study. There were eight in the asymptomatic and four in the symptomatic group. The median age for each group was 8 months (range 4-11 month) and 5.5 months (5-8 month). All patients in the symptomatic group were breastfed until diagnosed. In the asymptomatic group, they were breastfed for four to six months, and then weaned with only thin rice soup and vegetables. Nine patients had a vitamin D concentration below 20 ng/mL and three patients had levels between 20 and 29 ng/mL. Alkaline phosphatase (ALP) and parathyroid hormone (PTH) were elevated in both groups. There were statistically significant $25-OHD_3$ levels in the blood in both groups (P=0.008). Ten of the patients (83%) also had iron deficient anemia. Conclusion : Vitamin D deficiency and subclinical rickets has been identified in Korea. However, the prevalence of this disease has not been determined. The main limitation of this study was the small number of patients and the absence of a control group.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.2 no.2
• /
• pp.85-89
• /
• 2009

Purpose: To analyze the clinical outcome after ultrasound guided multiple dry needlings and local steroid injection for acute calcific tendinitis of shoulder. Materials and Methods: Twenty patients with acute episode of pain by calcific tendinitis of shoulder with average age 58.2 (50~70 years) and follow-up of 18 months in average (range, 12~24) were included in study. There were 18 patients with right and 2 with left sided involvement. All patients had calcific deposits in the supraspinatus tendon. All patients underwent standardized nonoperative treatment protocol, consisting of 5~12 MHz high resolution ultrasound guided multiple dry needlings with 18 guage needle, followed by 2% lidocaine 1cc and 40 mg/ml depomedrol 1cc injection at site of calcific tendinitis. The outcome was assessed by UCLA shoulder score, range of motion and VAS score. A statistical analysis with ANOVA and Tukey's post-hoc test with the significance level at 5% was performed using SAS 9.1 software (SAS Institute, Cary, NC). Results: All patients got continuous relief of pain right after the procedures until final follow-up. Before the procedures, the UCLA scores were fair in 15 patients and poor in 5. After the procedures, the UCLA scores were excellent in 16 patients and good in 4. All cases revealed no limitation of shoulder function. The average VAS score decreased from 8.9 before the procedures to 0.5 at final follow-up (p<0.0001). No complication was encountered. Conclusion: An ultrasound guided local steroid injections following multiple dry needlings would be one of the useful treatment modality for the acute calcific tendinitis of shoulder.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.2 no.2
• /
• pp.68-73
• /
• 2009

Purpose: We retrospectively studied the outcomes of the shoulder impingement syndrome for the treatment of the ultrasound-guided subacromial bursal steroid injection. Materials and Methods: Sixty-six shoulders of sixty-two patients with shoulder impingement syndrome treated from March, 2006 to April, 2009 were involved in this study. All cases underwent standardized, nonoperative treatment protocol consisting of 5~12 MHz high resolution ultrasound-guided local steroid injection into the subacromial bursa in modified Crass position. The shoulder range of motion, VAS score and impingement signs were evaluated during the initial and 1year visits. After injection, shoulder elevation exercise was encouraged. Statistical analysis with ANOVA model and Tukey's post-hoc test with the significance level at 5% were performed using SAS program. Results: All cases showed improved range of motion without limitation of shoulder function at immediate post-injection, 6-week, 3-month and 1year visits. The average VAS score at one year follow-up decreased to 2.85 from 6.47 before injection. In all cases the impingement signs became negative immediate after injection. However, 6 cases showed positive impingement signs after 6-week, which became negative after reinjection. The range of motion and VAS score were improved at one-year follow-up compared to initial visit (p<0.0001). No complication was noted at all follow-up period. Conclusion: Ultrasound-guided subacromial steroid injection alleviated the need of surgery, because it was successful in all our cases to improve pain and function of the shoulders until one year follow-up period.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.5
• /
• pp.586-597
• /
• 1999

Background: Many diagnostic tests have developed to diagnose tuberculosis and other mycobacterial diseases but the diagnosis of tuberculosis relies largely on radiological findings and acid-fast staining of sputum and/or culture. Recently, new serologic diagnostic methods, which are safe and easy to use have been introduced into Korea. In this study, the usefulness of serologic diagnosis for tuberculosis and the disease pattern induced variation of the test were evaluated. Methods: Serological assay was performed upon 108 patients with two test kits, the ICT tuberculosis and the BioSign$^{TM}$TB, which are based upon a rapid immunochromatographic assay technique, capable of being interpreted within 15 minutes. The case groups consisted of 61 patients with active pulmonary tuberculosis(36 patients), extrapulmonary tuberculosis(3 patients), or both(22 patients). Control groups consisted of 47 patients with inactive old pulmonary tuberculosis(17 patients), nontuberculous pulmonary disease(16 patients) and nonpulmonary cardiac disease(14 patients). Results : The diagnostic sensitivity, specificity, positive predictive value(PPV) and negative predictive value(NPV) of the ICT tuberculosis were 64.3%, 91.5%, 90.0% and 68.3% respectively. The diagnostic sensitivity, specificity, PPV and NPV of the BioSign$^{TM}$TB were 76.5%, 95.3%, 94.1 % and 78.8% respectively. Differences in sensitivity were not significant between patients with previous history of tuberculosis or patients without prior history of tuberculosis. The ICT tuberculosis test showed higher sensitivity in pulmonary tuberculosis patients(76.5%) than extrapulmonary tuberculosis patients(33.3%). There was no difference in sensitivity between patients with or without cavitary lesion by chest X-ray. Conclusion: Considering high specificity and PPV, serologic diagnosis using a rapid immunochromatographic assay device is another helpful diagnostic method in the diagnosis of tuberculosis, when combined with previous diagnostic methods such as chest X-ray, microbiologic study but it has limitation in terms of confirming the diagnosis for tuberculosis as the only diagnostic method because of relatively low sensitivity and NPV.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.1-27
• /
• 2011

In an attempt to cope with widespread, dynamic, and accelerating changes in both internal and external business environments, companies often utilize information technologies such as SCM(Supply Chain Management). To date, SCM research has mainly focused on the effects of dynamic factors on SCM success and emphasized adoption strategies and critical success factors. Consequently, the effects of more static factors such as interdependency between SCM partners have been largely ignored. The purpose of this study, therefore, is to examine the effects of both dynamic and static factors on SCM performance by controlling for information quality and partnership quality. The five factors examined in this study include innovative ness, mutual dependency, quality of information, partnership quality, and SCM performance. All factors were examined from the perspective of part suppliers, except the mutual dependency which was examined from two aspects: supplier's dependency on customer and customer's dependency on supplier. Data was collected through five hundred survey questionnaires distributed to the part supplier companies that have implemented SCM systems for at least one year. As a result, a total of 170 valid responses were obtained. A structural equation research model was fitted using SAS 9.1.3 and SMART-PLS 2.0. The results of this study can be summarized as follows. First, innovativeness positively affected SCM information quality. SCM partnership quality, and ultimately SCM performance. The path coefficient between innovativeness and information quality was 0.387, with a t-value of 3.528. Innovativeness also had a positively direct effect on partnership quality. The path coefficient was 0.351 with a t-value of 3.366. The total effect of innovativeness on partnership quality was significant, although its indirect effect on partnership quality by altering information quality was negligible. The total indirect effect of innovativeness on SCM performance by affecting information quality and partnership quality was significant with a p-value of 0.014. Innovativeness played an important role in determining SCM performance. Second, mutual dependency showed no significant effect on SCM information quality. This result contradicts the earlier assertion that the more dependent two companies are, the more accurate and timely the information they exchange ought to be. This study showed that this may not be the case; a partner may provide information of poor quality even when it is strongly dependent on the other. Mutual dependency showed significant effect on partnership quality. However, when the mutual dependency perceived by suppliers was divided into two parts, one being a supplier's dependency on its customer company and the other being a customer's dependency on the supplier, the latter showed a significant impact on the perceived SCM partnership quality. This result indicates that a customer company can hardly improve the partnership quality perceived by suppliers by making them more dependent. It improves only when the suppliers perceive that their partners, typically having more bargaining power, are more dependent on them. The overall effect of mutual dependency of any kind on SCM performance, however, was not significant. Although mutual dependency has been mentioned as an important static factor influencing almost every aspect of cooperation on a supply chain, its influences may not be as significant as it was initially perceived to be. Third, the correlation between information quality and partnership quality was 0.448 with a p-value of less than 0.001. Information quality had a path coefficient of 0.256 to partnership quality with a t-value of 2.940. The quality of information exchanged between partners may have an impact on their partnership quality. Fourth, information quality also had a significant impact on SCM performance with a path coefficient of 0.325 with a t-value of 3.611. In this study, SCM performance was divided into four categories: product quality, cost saving, service quality, and order fulfillment. Information quality has Significant impacts on product quality, cost saving and service quality, but not on order fulfillment. Fifth, partnership quality, as expected, had a significant impact on SCM performance. The path coefficient was 0.403 with a t-value of 3.539. Partnership quality, like information quality, had positive impacts on product quality, cost saving and service quality, but showed no impact on order fulfillment. It seemed that order fulfillment is the hardest category of performance that SCM can satisfy. One major limitation of this study is that it surveyed only the suppliers. To better understand the dual aspects of SCM, it is important to survey both suppliers and the assemblers, especially in pairs. This research, to our best knowledge, was the first attempt to study the level of dependency between the two groups by measuring the dual aspects of SCM and studying mutual dependency from the categories of suppliers and assemblers each.. In the future, a more comprehensive and precise measurement of SCM characteristics needs to be achieved by examining from both the supplier's and assembler's perspectives.