• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.203-215
• /
• 2011

Geochemical and mineralogical properties of a contamited soil should be taken into account to decide a remediation strategy for a given contaminant because development and optimization of soil remedial technologies are based on geochemical and mineralogical separation techniques. The objective of this study was to investigate the geochemical and mineralogical characteristics of arsenic-contaminated soils. The arsenic-contaminated soil samples were obtained from Chonam gold mine, Gwangyang, Chonnam, Particle size analysis, sequential extraction, and mineralogical analyses were used to characterize geochemical and mineralogical characteristics of the As-contaminated soils. Particle size analyses of the As-contaminated soils showed the soils contained 17-36% sand, 25-54% silt, 9-28% clay and the soil texture were sandy loam, loam, and silt loam. The soil pH ranged from 4.5 to 6.6. The amount of arsenic concentrations from the sequential soil leaching is mainly associated with iron oxides (1 to 75%) and residuals (12 to 91%). Major minerals of sand and silt fractions in the soils were feldspar, kaolinite, mica, and quartz and minor mineral of which is an iron oxide. Major minerals of clay fraction were composed of illite, kaolinite, quartz, and vermiculite. And minor minerals are iron oxide and rutile. The geochemical and mineralogical analyses indicated the arsenic is adsorbed or coprecipitated with iron oxides or phyllosilicate minerals. The results may provide understanding of geochemical and mineralogical characteristics for the site remediation of arsenic-contaminated soils.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.52-61
• /
• 2004

In order to remediate soils contaminated with oxyanionic As and cationic Zn and Ni through the pilot-scale acid washing, the effectiveness of acid washing and the properties of contaminated soils, fine soil particle and dissolved contaminants were evaluated. $H_{2}SO_4\;and\;H_{3}PO_4$ washing at pH $2{\sim}3$ enhanced the removal of As by the presence of competitive oxyanions and HCl washing effectively removed simultaneously As, Zn and Ni. The effectiveness of soil washing was little enhanced above the critical reaction time, and the carbonate, Fe/Mn oxide and organic/sulfides associated fraction were dominantly removed. The washing of coarse soil particles was highly efficient, but that of fine soil particles($<74{\mu}m$) was recalcitrant due to the enrichment with contaminants. Moreover, the physical separation of fine particles($<149{\mu}m$) enhanced the overall efficiency of soil washing. Therefore, both chemical extraction and separation of fine soil particles showed the high effectiveness of soil washing in the intersection point to minimize the amount of fine soil particles and to maximize the chemical extraction of contaminants.

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.223-227
• /
• 2005

The physical and mechanical properties of volcanic glass, which is distributed in the Samho area, South Korea were studied. Laboratory rock tests were carried out in order to obtain the various properties of rocks. Specific gravity, water content, absorption, porosity and wave velocity were measured for the physical properties. Uniaxial and triaxial compressive tests, Brazilian test and point load test were also performed for the mechanical properties. The tests of volcanic glass revealed that the apparent specific gravity, water content and absorption were 2.28, $1.67\%$ and $1.72\%$, respectively. Porosity $(3.87\%)$ was lower, whereas P-wave velocity (5330m/s) and S-wave velocity (2980 m/s) were relatively higher. Brazilian tensile strength ot 7.2MPa, and point load strength of 2.6MPa were among the mechanical properties of the rock. Uniaxial compressive strength (62.4MPa) estimated ken point load strength was very closed to the value (66.0MPa) from the uniaxial compressive test. Young's modulus and Poisson's ratio were E=43.2 GPa and v=0.28, respectively. Drawing the tangent line to Mohr-Coulomb failure criterion showed the cohesion of 20.1MPa and internal fraction angle of $28.6^{\circ}$.

• Korean Journal of Pharmacognosy
• /
• v.24 no.4
• /
• pp.267-281
• /
• 1993

To find antitumor components from higher fungi, the mycelia of Collybia confluens (Pers. ex Fr.) Kummer were cultured in artificial media. For efficient production of the mycelia, the influences of various modifications of culture conditions were examined. A water-soluble protein-bound polysaccharide fraction, Fr. A, was obtained from the mycelia by hot water extraction. When Fr. A was purified and fractionated by DEAE-cellulose and Sepbadex G-200 gel filtration chromatographies into four fractions which were designated B, C, C-I and C-II. The tumor inhibition ratios of these fractions ranged from 46% to 75% against the solid forms of sarcoma 180 in ICR mice at doses of 20 and 50 mg/kg/day when given intraperitoneally. Especially, Fr. C which was named Collyban(CB) exhibited a marked life-prolonging effect of the mice against ascitic forms of sarcoma 180 at a dose of 50 mg via i.p. administration. To extend spectra of the antitumor activities and eliminate the effects of allograft rejection, the characterization of antitumor effects of CB was performed in syngeneic host-tumor systems. It did not show any antitumor activity against L1210 murine leukemia in $CD_2Fl$ mice but prolonged their life span against ascitic forms of $MM_{46}$ carcinoma in $C_3H/He$ mice. Also it exhibited antitumor activity against human cervical cancer HeLa cells that were xenografted into nude mice having BALB/c genetic backgrounds by the i.p. injection at a dose of 100 mg/kg/day. In order to characterize the antitumor components, CB was examined by chemical analysis. It was acidic protein-bound polysaccharides composed of 31% polysaccharide, 27% protein and 3% hexosamine. CB was fractionated into two fractions, Fr. C-I(M.W.: 500 Kd) and Fr. C-II(M.W.:30 and 8 Kd) by Sephadex G-200 gel filtration chromatography.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.465-469
• /
• 2008

Hybrid thin films composed of block copolymer(BCP) and $TiO_2$ with various morphologies on the nanoscale were fabricated using self-assembly of block copolymer combined with sol-gel process. The factors governing morphology changes considered in this study are block copolymer composition, selectivity of solvent and the inclusion of an additive. We also investigated the efficiency of photoluminescence for selected films with different morphologies. Micelle or nanowire structure can be derived from the self-assembly of poly (styrene-block-4-vinyl pyridine) (PS-b-P4VP) depending on the relative selectivity of the solvent for the two blocks, and the titanium tetraisopropoxide ($Ti{OCH (CH_3)_2}_4$, TTIP) is coordinated with nitrogen in P4VP block. Addition of a third component 3-pentadecylphenol into the BCP/sol-gel mixture solution induces morphology change as a result of the change of relative volume fraction of the BCP. We confirmed that the efficiency of $TiO_2$ fluorescence changes for films depending on morphologies.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.5
• /
• pp.487-497
• /
• 2021

To investigate the industrial availability of liquid fermentation (PL-ferment) by Phellinus linteus mycelium as a postbiotics for the inhibition of inflammation, PL-ferment was fractionated into culture supernatant (CS), hot-water extract (HW) from PL-ferment, EtOH-precipitate (CP) fractionated from HW, and the dialysate (DCP) of CP. Compared to the other fractions, DCP which is expected to contain exopolysaccharide (EPS) as the major component, significantly decreased the production of NO, IL-6, and MCP-1 in LPS-induced RAW 264.7 cells, and IL-6 and IL-8 in TNF-α and IFN-γ-induced HaCaT cells. The general component analysis results showed that no significant difference in components was observed between the fractions, whereas sugar composition analysis revealed that DCP had decreased glucose and increased mannose contents compared to the other fractions. This suggests that mannose played an important role in the anti-inflammatory activity of the active fraction, DCP. Molecular weight distribution analysis revealed that DCP was mainly composed of low-molecular-weight material-removed high-molecular-weight polysaccharides of 18-638 kDa, suggesting that EPS originated from P. linteus EPS. In conclusion, our results suggest that the DCP of P. linteus mycelium fermentation using the anti-inflammatory activity could be used industrially as postbiotic material.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.53-61
• /
• 2018

Anaerobic digestion (AD) is one of the most widely used process that can convert the organic fraction of waste activated sludge (WAS) into biogas. However, most researched actual methane yields of anaerobic digester (AD) on lab scale is lower than theoretical ones. Bioelectrochemical, anaerobic digester was used to increase methane yield from waste activated sludge. The influence of anaerobic digestion sludge and raw sludge mixing ratio (3:7, 5:5) on methane yield and organic matter removal efficiency were explored. As a result, when the mixing ratio of bioelectrochemical anaerobic sludge was 5:5 compared with 3:7, the highest methane yields were 294.2 mL $CH_4/L$ (0.63 times increase) and 52.5% (7.5% increase), the bioelectrochemical anaerobic digester(5:5) was more stable in the pH, t otal alkalinity and VFAs, respectively. These results showed that the increase in the mixing ratio of anaerobic digestion sludge was found to be effective for maintaining the stable performance of bioelectrochemical anaerobic digester.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.878-884
• /
• 2017

It is important to understand interactions in the sediment-water environment because nitrate (N) and phosphorus (P) nutrient fluxes released into overlying water can represent a significant fraction of the total nutrient requirement for primary productivity. In this study, we analyzed and estimated benthic nutrient fluxes at the sediment-water interface, investigating environmental conditions in Gomso and Geunso Bays. Also, we compared previously reported nutrient flux data to identify regional differences. As a result, benthic nutrient fluxes in Beopsan were DIN: $6.14mmol\;m^{-2}d^{-1}$ and DIP: $0.32mmol\;m^{-2}d^{-1}$ higher than other survey sites. Sediment COD were $4.0-10.8mg/g{\cdot}dry$, and environmental deterioration was observed due to organic pollution. If no solution is found for tidal flat farm management, problems such as a decrease in aquaculture production will follow. Therefore, long-term monitoring of tidal flat environments should be pursued to enable the sustainable use of biological resources.

• Investigative Magnetic Resonance Imaging
• /
• v.23 no.3
• /
• pp.251-258
• /
• 2019

Purpose: To assess the feasibility of the use of spin-echo echo-planar imaging (SE-EPI) magnetic resonance elastography (MRE) in livers of children and young adults. Materials and Methods: Patients (${\leq}20$ years old) who underwent 3T SE-EPI MRE were included retrospectively. Subjects were divided into three groups according to the purpose of the liver MRI: suspicion of fatty liver or focal fat deposition in the liver (FAT group), liver fibrosis after receiving a Kasai operation from biliary atresia (BA group), and hepatic iron deposition after receiving chemotherapy or transfusions (IRON group). Technical failure of MRE was defined when a stiffness map showed no pixel value with a confidence index higher than 95%, and the patients were divided as success and failure groups accordingly. Clinical findings including age, gender, weight, height, and body mass index and magnetic resonance imaging results including proton density fat fraction (PDFF), $T2^*$, and MRE values were assessed. Factors affecting failure of MRE were evaluated and the image quality in wave propagation image and stiffness map was evaluated using the appropriate scores. Results: Among total 240 patients (median 15 years, 211 patients in the FAT, 21 patients in the BA, and 8 patients in the IRON groups), technical failure was noted in six patients in the IRON group (6/8 patients, 75%), while there were no failures noted in the FAT and BA groups. These six patients had $T2^*$ values ranging from 0.9 to 3.8 ms. The image quality scores were not significantly different between the FAT and BA groups (P > 0.999), while the scores were significantly lower in the IRON group (P < 0.001). Conclusion: The 3T SE-EPI MRE in children and young adults had a high technical success rate. The technical failure was occurred in children with decreased $T2^*$ value (${\leq}3.8ms$) from iron deposition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.326-338
• /
• 2021

Ultra-performance liquid chromatography (UPLC) was used to assess the hordein protein fraction of malting barley. C-hordeins (barley prolamins) were extracted with 70% ethanol (EtOH) and 55% isopropyl alcohol (IPA, 2-propanol), and B-hordeins were extracted with the same alcohols in 1.0% dithiothreitol (DTT). High molecular weight (HMW) prolamins (D-hordeins) were extracted with 50% IPA with 1M Tris-HCl (pH 8.0). The same protein patterns were observed in both the experimental extraction solutions (EtOH and IPA). However, the patterns of hordein, extracted with EtOH and IPA containing 1.0% DTT, differed slightly. C- and B-hordeins extracted from those solutions were analyzed. Twenty-six malting barley varieties developed in Korea were analyzed using UPLC. The varieties were divided into seven groups according to hordein patterns of retention time 16 min to 18 min, and 20 varieties showed unique patterns.