• 제목/요약/키워드: P axis

검색결과 966건 처리시간 0.041초

시상정중면에서 하악우각부 사이의 각도와 하악과두장축의 수평경사도간의 상호관계 (INTERRELATION BETWEEN THE ANGLE FORMED BY THE MIDSAGITTAL PLANE AND THE MANDIBULAR ANGLE AND THE HORIZONTAL INCLINATION OF THE CONDYLAR LONG AXIS)

  • 오완수;최순철
    • 치과방사선
    • /
    • 제22권1호
    • /
    • pp.109-116
    • /
    • 1992
  • 저자는 경북대학교 치과대학 학생중 악관절의 기능장애의 병력 및 현증이 없고 안모가 단정한 정상인 56명을 대상으로 시상정중면에서 양측의 하악우각부사이의 각도와 하악과두장축의 수평경사도를 계측하여 통계학적으로 분석한 바 다음과 같은 결과를 얻었다. 1. 시상정중면에서 하악우각부 사이의 각도는 우측이 18.50±1.48°, 좌측이 19.30±1.55°였다. 2. 하악과두장축의 수평경사도는 우측이 19.25±7.56°, 좌측이 20.27±7.05°였다. 3. 두 각도간의 관계는 우측의 경우 y=20. 31-0.0094×(r=-0 482, p<0.01), 좌측의 경우 y=20.64-0.066×(r=-0.301, p<0.05)인 것으로 나타났다(y : 하악과두장축의 수평경사도, x : 시상정중면에서 하악우각부 사이의 각도).

  • PDF

발안천에서 토양 환경에 따른 하천 주변의 식생분포 (Distribution of Stream-Edge Vegetation in the Balan Stream as Related to Soil Environjments)

  • 백명수;임경수;이도원;조도순
    • The Korean Journal of Ecology
    • /
    • 제20권6호
    • /
    • pp.451-459
    • /
    • 1997
  • Seasonal and spatial distribution of vascular plants were examined and related to soil texture, pH, moisture and nutrient contents in the riparian zone of the Balan Stream. In spring the area was dominated by Alopecurus aequalis var. amurensis, was displaced by Persicaria thunbergii and Humulus japonicus in summer. From the stream channel to bank, soil texture and pH were not significantly differentiated, moisture decreased, organic matter and K increased, and TKN and available P increased in June and decreased in August. DCA ordination analysis by species distribution showed spatially and seasonally distinct patterns seasonal difference was evident on axis 1, and spatial difference according to the distance from stream channel was clear, too. Both axis 1 and axis 2 scores were significantly correlated with biomass, pH, and phosphate. Species richness increased were significantly correlated with biomass, pH, and phosphate. Species richness increaed with increasing organic matter and phosphate, and decreased with increasing soil moisture and K. Biomass increased with increasing organic matter, but was negatively related to pH, moisture, TKN, available P and K. Available P was significantly correlated with biomass, pH, and total soil nitrogen. In conclusion, the distribution of riparian vegetation was governed by soil physico-chemical properties, which are primarily determined by how far it is from the stream channel.

  • PDF

머시닝센터를 위한 윤곽오차 분석 및 PID 제어기 설계 (Contour error analysis and PID controller design for machining center)

  • 나일주;최종호;장태정;최병갑;송오석
    • 제어로봇시스템학회논문지
    • /
    • 제3권1호
    • /
    • pp.32-39
    • /
    • 1997
  • One of the most important performance criteria in tuning the gain of position loop controller for CNC machining center is the contour error. In this papre we analyze contour error in the linear and circular interpolations for the axis-matched and mismatched cases. To have small contour errors, it is necessary to set the P gain for each axis to be same. And the D gain should be much smaller than the P gain. Baded on the analysis in the frequency domain, we propose a gain tuning method for the P and PD controllers. We show that the PD controller is better than the P controller. The effectiveness of this method is demonstrated by experiments.

  • PDF

두경부환자의 토모테라피 치료시 SETUP 변화율에 대한 후향적 평가 (After retrospective evaluation of the SETUP rate change during the treatment of head and neck cancer patient with Helical Tomotherapy)

  • 하태영;김승준;황철환;손종기
    • 대한방사선치료학회지
    • /
    • 제28권1호
    • /
    • pp.27-34
    • /
    • 2016
  • 목 적 : 두경부 환자 토모 치료 시 위치 보정한 좌표값을 이용한 환자의 Setup 변화율을 후향적 평가를 하고자 한다. 재료 및 방법 : 2010년 01월에서 2012년12월까지 토모테라피 치료를 받은 두경부 환자 중 무작위(95)로 샘플링하여 3그룹으로 정리하였다. 그룹 1(32)Brain, 그룹2(28)Maxillar, Nasal cavity, 그룹3(35) Nosopharynx(NPX), Tongue, Tonsil, Oropharynx(OPX)로 분류하였다. 3그룹 간에 있어 X 축, Y 축, Z 축 오차, Roll, 체중변화, Vector를 변수로 하여, 30회 치료기간 중 반복측정에 의한 통계적 검정을 시행하였다. 결 과 : 통계적 검정 결과 fraction에 따른 차이는 x축(p=0.458), y축(0.989)은 차이가 없었으며 z축(p=0.001), roll(p=0.037), 체중변화(p<0.001), Vector(p<0.001)은 차이가 있는 것으로 나타났다. 또한 fraction에 따라 3그룹간의 패턴은 x축(p=0.430), roll(p=0.299)은 차이가 없었으며 y축(0.023), y축(0.023), 체중변화(p=0.001), Vector(p=0.028)은 차이가 있는 것으로 나타났다. 결 론 : 후향적 평가를 시행한 결과 그룹3즉, Y, Z, 체중변화, Vector 변화에 대하여 알 수 있었고 Low neck을 포함한 치료 시 Random error가 커짐을 통계적 알 수 있었다.

  • PDF

미세 변위제어를 위한 공압 액추에이터 개발 (Development of a pneumatic actuator for Micro-Positioning control)

  • 손영선;이동주;이종옥
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2002년도 춘계학술대회 논문집
    • /
    • pp.429-434
    • /
    • 2002
  • In order to improve the accuracy in the field of simiconductor and LCD research equipment, the demand of XYZ stage which is possible to control X axis, Y axis and Z axis has been increased steadly in place of the existing XY stage which is only practicable to X & Y axis positioning control. This paper presents a new pneumatic actuator for Micro-positioning control in the XYZ stage. Air pressure in a pneumatic actuator is controlled by the E/P Regulator. The control range of pneumatic actuator is about 100 micro-meters and it's construction concept is easy to apply a practical state

  • PDF

영상검사 소견으로 관찰된 후만곡을 동반한 경추 전만각에 대한 영향인자 분석 (Analysis of Related Factors on Cervical Angle with Kyphosis Observed by X-ray)

  • 김규섭;김형수;양인석;이용석;이창환;정재훈;김원섭
    • 척추신경추나의학회지
    • /
    • 제12권1호
    • /
    • pp.57-70
    • /
    • 2017
  • Objectives : The purpose of this study is to find out the factors affecting the cervical angle with kyphosis. Methods : We investigated 340 cases of patients who had cervical kyphosis. We used cervical angle, flexion malposition angle, odontoid process cline angle, axis-atlas cline angle, odontoid process-atlas cline angle and occiput-atlas cline angle. Correlations between cervical angle and flexion malposition angle, odontoid process cline angle, axis-atlas cline angle, odontoid process-atlas cline angle, occiput-atlas cline angle were analyzed by pearson correlation analysis. Results : The correlation between cervical angle and flexion malposition angle was p-value 0.007, and odontoid process cline angle was p-value 0.002, and axis-atlas cline angle was p-value 0.000, and odontoid process-atlas cline angle was p-value 0.000, and occiput-atlas cline angle was p-value 0.012. Conclusions : Flexion malposition angle, odontoid process cline angle are inversely proportional to cervical angle. And correlation is statistically significant(p<0.01). Axis-atlas cline angle, odontoid process-atlas cline angle are proportional to cervical angle. And correlation is statistically significant(p<0.01). Occiput-atlas cline angle is proportional to cervical angle. And correlation is statistically significant(p<0.05).

  • PDF

단결정과 단분자막을 모델 시스템으로 한 Poly[(R)-3-hydroxybutyrate]의 분해거동 (Degradation Behavior of Poly[(R)-3-hydroxybutyrate] by Using Single Crystals and Monolayers as Model Systems)

  • 김성수;이원기;안용식
    • 폴리머
    • /
    • 제29권1호
    • /
    • pp.54-58
    • /
    • 2005
  • 미생물 합성 poly[(R)3-hydroxybutyrate]](P(3HB))의 알칼리 및 효소 분해거동을 단결정과 Langmuir 단분자막을 모델시스템으로 하여 연구하였다. 단결정의 초기효소 및 알칼리 분해거동은 단결정의 장축에 대해 수직방향(b축)으로 분해가 일어났고 용융점 이하의 온도에서 열처리 또한 단결정의 b축을 따라 봉우리 형태의 형태학적 변화를 관찰하였다. 이러한 결과는 라멜라 단결정은 b축을 따라 불규칙한 영역을 가지고 있음을 의미하고 효소분해가 불규칙한 영역에서 선호적으로 일어난다고 설명할 수 있다. 한편, P(3HB), 단분자막의 효소 및 알칼리 분해경향은 분해매체와 표면압력에 크게 의존하였다. 알칼리 분해의 경우 낮은 표면압력에서도 분해를 나타내는 반면 효소 분해는 높은 표면 압력 하에서 분해거동을 나타내었다. 이러한 현상은 분자수준의 크기인 알칼리 분해매체는 P(3HB) 단분자막과 좁은 접촉면적(낮은 표면압력)에서도 활성을 보이는 반면 크기가 큰 분해효소는 보다 큰 활성 접촉면적(높은 표면압력)을 필요로 하는 것으로 판단된다.

10 kW급 수직축 풍력터빈에 대한 구조물 동적응답 계측 및 분석 (Dynamic Response Measurements and Analysis on a 10 kW Class Vertical Axis Wind Turbine)

  • 이진학;김원술;한택희;임승률
    • 한국소음진동공학회논문집
    • /
    • 제27권1호
    • /
    • pp.107-113
    • /
    • 2017
  • The dynamic characteristics including natural frequencies and excitation frequencies are evaluated for a small 10 kW vertical axis wind turbine. Acceleration responses were measured at 12 distributed locations for impact vibration tests, ambient vibration tests during non-operational and operational conditions, and braking tests during operational condition. The natural frequencies for the lowest 2 bending modes and the first torsional mode were estimated and also the excitation frequencies, i.e. 1P, 2P, 4P, were also estimated according to the rotational speed using the responses under operational conditions (i.e. power generation condition).

한반도 지진의 메카니즘 특성 (Earthquake Mechanism of Korean Peninsula)

  • 전명순
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
    • /
    • pp.58-63
    • /
    • 1999
  • In and around the Korean Peninsula 22 intraplate earthquake mechanisms since 1936 were analyzed to understand the regional stress orientation and tectonics. These 22 earthquakes are largest ones in this century and may represent the characteristics of earthquake in the region. Focal mechanism of earthquakes in the region show predominant strike-slip faulting with small amount of thrust components. The average P-axis is almost horizontal ENE- WSW. Studied data are compared with neighboring intraplate region in order to understand the tectonic regime in far est Asia. In northeastern China strike-slip faulting is dominant and nearly horizontal average P-axis in ENE- WSW is very similar with the Korean Peninsula. On the other hand in the eastern part of East Sea thrust faulting is dominant and average P-axis is horizontal with ESE- WSW This indicate that not only the subducting Pacific Plate in east but also the indenting Indian Plate controls earthquake mechanism in the far east of the Eurasian Plate.

  • PDF