• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2261-2269
• /
• 2017

The current LTE network system provides service by locally allocating eNodeB to the EPC(Evolved Packet Core). However, it is not suitable for inter-node communication based on the distributed network environment. In this paper, we propose an integrated system by configuring E-UTRAN and EPC as All-In-One type to enable service in each distributed node. M2M UE is mounted on a each node for wireless In-band backhaul link. The integrated node provides inter-node communication over the wireless in-band backhaul link. If a normal UE moves and an access node changes in the system all entities of LTE integrated into one, it is necessary to change the P-GW which is IP anchor. In order to support the inter-node mobility even if P-GW is changed, We defined UPFE(User Packet Forwarding Extension) scheme and implemented the handover procedure of EPC. Also, we analyze the cell range of the integrated LTE system with the addition of the node and compare the handover delay with the current system.

• Membrane Journal
• /
• v.4 no.3
• /
• pp.152-162
• /
• 1994

The photodegradation efficiency of formic acid on $TiO_2$ photocatalytic membranes was investigated. A new titania membrane reactors for purification of water combining microfiltration with photocatalytic degradation of organic compounds were developed. Titania membrane tubes(average pore size of $0.2\mu m$) were prepared by the slip casting, and porous thin films of $TiO_2$ were formed on the tube surface by the sol-gel process to increase the surface area, and consequently to increase photodegradation efficiency of organic compounds. The UV light with the wavelength of 365 nm was used as a light source for photocatalytic reactions. The photodegradation efficiency of the organic compounds was strongly dependent on the flux of the solution, the microstructure of the membrane (sol pH), and the amount of $O_2$ supplied. The effects of the primary oxidant such as $H_2O_2$ and dopants such as $Nb_2O_5$ on the photodegradation efficiency were also investigated. The results showed that more than 80% of formic acid could be degraded using membrane coated with a $TiO_2$ sol of pH 1.45. The photodegradation efficiency could be improved by about 20% when adding $H_2O_2$ in feed solution or doping $TiO_2$ membranes with $Fe_2O_3$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.19-24
• /
• 2007

With recent advancement of high-speed, multi-gigabit data transmission capabilities, serial links have been more widely adopted in industry than parallel links. Since the parallel link design forces its transmitter to transmit both the data and the clock to the receiver at the same time, it leads to hardware's intricacy during high-speed data transmission, large power consumption, and high cost. Meanwhile, the serial links allows the transmitter to transmit data only with no synchronized clock information. For the purpose, clock and data recovery circuit becomes a very crucial key block. In this paper, a 5.4Gbps half-rate bang-bang CDR is designed for the applications of high-speed graphic DRAM interface. The CDR consists of a half-rate bang-bang phase detector, a current-mirror charge-pump, a 2nd-order loop filter, and a 4-stage differential ring-type VCO. The PD automatically retimes and demultiplexes the data, generating two 2.7Gb/s sequences. The proposed circuit is realized in 66㎚ CMOS process. With input pseudo-random bit sequences (PRBS) of $2^{13}-1$, the post-layout simulations show 10psRMS clock jitter and $40ps_{p-p}$ retimed data jitter characteristics, and also the power dissipation of 80mW from a single 1.8V supply.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2002.03a
• /
• pp.83-88
• /
• 2002

최근 들어 무선인터넷 및 모바일 컴퓨팅 기술의 급속한 발전과 함께 향후 그 수요가 증대될 것으로 예상되는 분야가 위치기반 서비스(LBS: Location Based Service) 기술이다. 위치기반 서비스는 이동 통신을 통하여 사람 및 사물의 위치를 파악하고 이를 활용한 부가 응용 서비스로 국가 정보기술 인프라의 주요 영역을 점유하고 있는 GIS의 차세대 핵심 기술로 발전이 예상되는 분야이다[3][4]. 현재 3GPP나 3GPP2, OGC, LIF와 같은 여러 표준화 기구 및 산업체에서 위치기반 서비스와 이를 위한 시스템에 대한 연구가 진행중이며 위치기반 서비스를 위한 데이터 모델 표준화 연구는 거의 이루어지지 않고 있는 상황이다. 위치기반 서비스를 위한 데이터 표준화 모델은 이미 구축된 공간 데이터베이스의 재사용과 위치기반 서비스들간의 상호 운용성을 지원할 수 있어야 한다. 본 연구에서는 위치기반 서비스들 간의 상호 호환 및 통합을 가능하게 하고, 기존 공간데이터베이스와 연계하여 이 데이터를 위치기반 서비스에 활용하기 위한 공간 데이터 표준화 모델을 제안하고자 한다. 이를 위해 위치기반 서비스 표준화 사례를 조사하고, 위치기반 서비스를 위한 공간 데이터 모델을 제시하였다. 본 연구에서는 OpenLS의 위치기반 서비스를 기본서비스로 하고, OpenGIS의 공간 데이터 모델을 기반으로 네 가지 기본 위치 데이터 타입과 모델의 요구 사항을 포함하는 공간 데이터 표준모델을 개발하였다. 위치기반 공간 데이터 표준 모델은 위치기반 서비스와 데이터들과의 연계를 쉽게 하고, 위치기반 서비스들 간의 상호 운용성을 높이며, 기존 사용자 시스템의 수정 없이 인터페이스만을 추가함으로써 표준을 수용할 수 있다.\pm}153.2,\;116.1{\pm}94,\;29.4{\pm}30.3,\;45.1{\pm}44$로 Mel 10군과 Mel 30군이 유의적인 감소를 보였으나(p<0.05) 이들 두 군 간의 차이는 나타나지 않았다. 이상의 결과로, 랫트에서 복강수술 후 melatonin 10mg/kg투여가 복강 내 유착 방지에 효과적이라고 생각된다.-1}{\cdot}yr^{-1}$로서 두 생태계에 축적되었다.여한 3,5,7군에서 PUFA 함량이 증가한 반면, SFA 함량은 감소하여 P/S 비율, n-3P/n-6P 비율은 증가하는 경향이었으며 이는 간장의 인지질, 콜레스테롤 에스테르, 총 지질의 지방산조성에서도 같은 경향을 볼 수 있었다.X>$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.565-570
• /
• 2010

A coenzyme Q10 nanoemulsion was prepared using high pressure homogenization with different valve type conditions (A, B, and C) and cycle numbers (1, 2, and 3). The particle size, transmittance, zeta potential, and coenzyme Q10 content of the prepared coenzyme Q10 nanoemulsion were measured. The stability of the prepared coenzyme Q10 nanoemulsion was evaluated on heating ($95^{\circ}C$), freezing ($-20^{\circ}C$), and different pH (2-10) conditions. Also, the prepared coenzyme Q10 nanoemulsion was stored at different temperatures of 4, 25, and $40^{\circ}C$ for 12 weeks to evaluate its storage stability. In this study, the optimal conditions of high pressure homogenization for the preparation of a coenzyme Q10 nanoemulsion were identified to be 150 MPa, C valve, and a cycle number of 3. The results showed that the prepared coenzyme Q10 nanoemulsion had an average particle size of 40 nm, generated no deposits or floating matter when stored at either 4 or $25^{\circ}C$ for 12 weeks, and displayed excellent dispersibility and transparency when processed at different pHs (4-10) or heating ($95^{\circ}C$) and, freezing ($-20^{\circ}C$) conditions. Our results indicated that a coenzyme Q10 nanoemulsion prepared by high pressure homogenization can be used for preparing beverages in the food industry.

• Korean Journal of Microbiology
• /
• v.46 no.2
• /
• pp.223-227
• /
• 2010

RNase E plays a major role in the degradation and processing of a large number of RNA transcripts in Escherichia coli and forms the core component of the degradosome, a large protein complex involved in RNA metabolism. RraA and RraB are recently discovered protein inhibitors of RNase E and are evolutionarily conserved. In this study, we observed that, unlike RraA, overexpression of RraB did not rescue growth arrest of E. coli cells overexpressing RNase E. To examine whether this phenomenon stems from differential inhibitory effects of RraA and RraB on RNase E substrates, we analyzed three in vivo RNase E substrates. The results showed that RraA inhibited RNase E activity more efficiently than RraB on the degradation of RNA I, which controls the copy number of ColE1-type plasmid, and rpsO mRNA encoding ribosomal protein S15, while RraB was unable to inhibit the processing of pM1 RNA, a precursor of the RNA component of RNase P, by RNase E. Our results imply that RraB inhibits RNase E activity in a more substrate-dependent manner than RraA and this property of RraB may explain why overexpression of RraB could not rescue cells overexpressing RNase E from growth arrest.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.2
• /
• pp.173-181
• /
• 2016

Skin basement membrane (BM) is a specialized structure that binds dermis and epidermis of the skin and plays an important role in maintaining skin structure. Structural change and destruction of BM is reported to appear due to UV exposure and aging, which may contribute to skin aging including wrinkle formation and a decrease in elasticity of the skin. One of the key components of the BM is laminin-332 (LN-332), and is a major contributor to epidermal-dermal attachment. In this study, we elucidated the effects of Meladrium firmum hexane fraction (MFHF) on LN-332 expression in HaCaT, a human keratinocyte cell line. Quantitative real-time PCR (RT-PCR) and immunoblot analysis revealed that MFHF induced upregulation of LN-332 gene and protein expression. Next, cells were treated with p38 MAPK inhibitor (SB202190) prior to MFHF treatment to analyze the signaling pathway contributing to LN-332 expression. The mRNA and protein levels of LN-332 expression were suppressed completely by pretreatment with p38 MAPK inhibitor. Furthermore, MFHF also increased the mRNA level of collagen type VII and integrin ${\alpha}6$ of skin BM component. These results collectively suggest that MFHF may have potential as an effective agent to stimulate the synthesis of BM components, and could be used to improve phenomenon of skin aging ascribed to the structural and functional impairments of BM in aged human skin.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.2
• /
• pp.73-80
• /
• 2021

Purpose: The purpose of this study is to compare the color stability of provisional restorative materials fabricated by subtractive and additive manufacturing. Materials and Methods: PMMA specimens by subtractive manufacturing and conventional method and bis-acryl specimens by additive manufacturing were fabricated each 20. After immersing specimens in the coffee solution and the wine solution, the color was measured as CIE Lab with a colorimeter weekly for 4 weeks. Color change was calculated and data were analyzed with one-way ANOVA and the Tukey multiple comparisons test (α = 0.05). Results: PMMA provisional prosthetic materials by subtractive manufacturing showed superior color stability compared to bis-acryl provisional prosthetic materials by additive manufacturing (P < 0.05), and showed similar color stability to the PMMA provisional prosthetic materials by conventional method (P > 0.05). Conclusion: It is recommended to fabricate provisional restorations by subtractive manufacturing in areas where esthetics is important, such as anterior teeth, and consideration of the color stability will be required when making provisional prosthetic using additive manufacturing.

• Journal of Korea Foundry Society
• /
• v.41 no.3
• /
• pp.235-240
• /
• 2021

We present the effect of the critical cooling rate during rapid solidification on the nucleation of precipitates in an Fe₇₅B₁₃P₅Nb₂Hf₁C₄ (at.%) alloy. The thermophysical properties of the rapidly solidified Fe₇₅B₁₃P₅Nb₂Hf₁C₄ liquids, which were obtained at various cooling rates with various sizes of gas-atomized powder during a high-pressure inert gas-atomization process, were evaluated. The cooling rate of the small-particle powder (≤20 ㎛) was 8.4×10⁵ K/s, which was 13.5 times faster than that of the large-particle powder (20 to 45 mm; 6.2×10⁴ K/s) under an atomized temperature. A thermodynamic calculation model used to predict the nucleation of the precipitates was confirmed by the microstructural observation of MC-type carbide in the Fe₇₅B₁₃P₅Nb₂Hf₁C₄ alloy. The primary carbide phase was only formed in the large-particle gas-atomized powder obtained during solidification at a slow cooling rate compared to that of the small-particle powder.