• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.104-105
• /
• 2018

해사안전정보(MSI)는 항행경보, 기상특보, 안전관련 긴급 정보로 구성되어 NAVTEX와 SafetyNet 체계를 통해 서비스되고 있으며, 서비스 개선을 위한 요구사항으로 해사안전정보의 필터링과 전자해도 시스템과의 연계 방안이 제시된 바 있다. 국제해사기구의 e-Navigation 전략이행계획의 해사서비스목록(MSP)으로 해사안전정보 서비스(MSP5)가 포함되었고, 국내외 e-Navigation 프로젝트에서는 국제표준에 기반한 해사안전정보 서비스 개발이 진행 중에 있다. 본 연구에서는 한국형 e-Navigation 사업의 중점 서비스로 개발 중인 S-124 표준기반 해사안전정보 서비스 기술 개발 배경과 주요 내용을 소개 한다. S-124는 항행경보와 T&P 항행경보를 포함하는 표준으로, 본 연구에서는 S-124 데이터 모델에 기반 하여 한국형 e-Navigation의 서비스 플랫폼인 MCP(Maritime Cloud Platform)를 통한 서비스 프로토타입 개발 결과를 기술 하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1398-1399
• /
• 2006

현재 상용화된 OLED 소자는 최대 단점인 수분 취약성의 원인으로 top emission과 flexible 타입으로 제조되는데 장애가 되고 있다. 따라서 top emission 방식과 flexible한 소자를 실현하기 위해 수분 및 산소 침투를 방지하기 위한 유전체 막의 실험이 진행되고 있는데, 본 실험에서는 기존의 PECVD보다 plasma의 density가 높은 HDP(High Density Plasma)-CVD를 사용해 SiOx 및 SiNx 유전체 film을 증착하였고 MOCON 테스트를 통한 수분침투 방지막으로써의 가능성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1257-1258
• /
• 2007

본 논문에서는 초전도 플라이휠 에너지 저장장치에 저장된 에너지의 손실을 평가하였다. 초전도 베어링은 저어널 타입이며 수직축형태로 플라이휠 시스템을 구성하였다. 초전도 플라이휠에 사용하는 전동발전기의 회전자를 영구자석을 사용하는 경우 코어의 사이즈 및 체적 변화에 따른 회전 손실과 진공에 따른 풍손이 회전손실에 미치는 영향을 평가 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.62-62
• /
• 2010

근래 실리콘 나노선을 이용한 FET타입의 바이오 센서로의 응용 연구가 활발하다. 본 연구에서는 top-down 방식으로 제작한 실리콘 나노선의 전자수송 특성을 측정 분석하여 실리콘 나노선의 기하학적 변수에 따른 수송 변수를 추출하였다. 두께가 40 nm인 SOI wafer로부터 출발하여 일반적인 포토리소그라피와 건식식각 공정을 통하여 선폭이 100-300 nm 그리고 길이가 2-20 mm인 실리콘 나노선을 제작하고 resistance 및 transconductance를 측정하여 전하농도와 이동도의 선폭에 대한 의존도를 얻었다. 이를 바탕으로 bare surface, OH-activated surface, APTES-treated surface등 실리콘 표면상태에 따른 표면전하의 시간에 대한 진화과정을 모니터 할 수 있었으며, 또한 PBS 용액상태에서 pH를 변화시킴에 따른 전하수송 특성곡선의 변화를 연구하였다.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.337-342
• /
• 2015

SMT is an equipment that picks up electronic components and does precise placing onto PCBs. In order to do this, it stops in front of a camera installed in the middle to go over vision inspection. And after that it is move for placing. There are 16 different types of routes in this process. This paper presents the fastest algorithm to place (sLa-Camera-pLb) among all these routes. In order to do this, instead of stopping in front of camera the object should move on while going over the vision inspection. Among all possible tracks, this thesis will provide algorithm to find out the fastest tracks to do vision inspection and placing. And as a result, this thesis have demonstrated that this method can save about 16% of time compared to going over inspection while the object is standing still through simulation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.213-217
• /
• 2006

An intelligent performance diagnostic program using the Neural Network was proposed for PW206C turboshaft engine. It was selected as a power plant for the tilt rotor type Smart UAV (Unmanned Aerial Vehicle) which has been developed by KARI (Korea Aerospace Research Institute). For teaming the NN, a BPN with one hidden, one input and one output layer was used. The input layer had seven neurons of variations of measurement parameters such as SHP, MF, P2, T2, P4, T4 and T5, and the output layer used 6 neurons of degradation ratios of flow capacities and efficiencies for compressor, compressor turbine and power turbine. Database for network teaming and test was constructed using a gas turbine performance simulation program. From application results for diagnostics of the PW206C turboshaft engine using the learned networks, it was confirmed that the proposed diagnostics algorithm could detect well the single fault types such as compressor fouling and compressor turbine erosion.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.57-65
• /
• 2002

In this paper, a 2.5V 10-bit 300MSPS CMOS D/A Converter is described. The architecture of the D/A Converter is based on a current steering 8+2 segmented type, which reduces non-linearity error and other secondary effects. In order to achieve a high performance D/A Converter, a novel current cell with a low spurious deglitchnig circuit and a novel inverse thermomeer decoder are proposed. To verify the performance, it is integrated with $0.25{\mu}m$ CMOS 1-poly 5-metal technology. The effective chip area is $1.56mm^2$ and power consumption is about 84mW at 2.5V power supply. The simulation and experimental results show that the glitch energy is 0.9pVsec at fs=100MHz, 15pVsec at fs=300MHz in worst case, respectively. Further, both of INL and DNL are within ${\pm}$1.5LSB, and the SFDR is about 45dB when sampling, frequency, is 300MHz and output frequency is 1MHz.

• Korean journal of applied entomology
• /
• v.32 no.2
• /
• pp.208-217
• /
• 1993

Feeding behavior fo female brown planthoppers, Nilaparvata lugens Stal, was examined with an electrical recording technique using DC amplifier and through anatomical observation of stylet ovement in the rice plat with electrical recordings. There was six feeding patterns, type P, S, SB, O, X and Ph with the brown planthopper. Type P was a probing pattern during searching the proper feeding site. Type S appeared to be associated with the initial penetration and changing direction through the tissues, and from this type type SB pattern could be distinguished by the regularity of the large potential drops seen, and might be associated with penetration of the phloem sheath and/or salivation in the phloem sheath. The type O pattern shows none of the large voltage drops which were believed to occur when cell walls were being broken down and passes through a relatively thin layer of cells into an air space. The very constant waveform of the type X pattern could be seen during ingestion within the xylem bundle sheath area. The Ph pattern always followed an SB pattern and was associated with a marked negative voltage drop. When this pattern was seen, the brown planthopper might be ingested plant sap from phloem sheath area.

• Journal of Korea Game Society
• /
• v.18 no.4
• /
• pp.43-52
• /
• 2018

This study was developed as a mobile serious game app (Roly Poly 160 App) based on a prototype model and then used in a public health center for diabetes patients. The mobile serious game application upgraded the mobile version of Roly Poly 160, which is a content for diabetes self-management of the existing PC version, by requesting to charge service of G city. The study period was from February 19, 2018 to May 11, 2018, and users were allowed to access the Roly Poly 160 app at least once a day for a total of 8 to 12 weeks after the preliminary investigation. As a result, HbA1C was significantly decreased(p=0.04), and diabetic knowledge was significantly higher than that before the follow-up(p=0.01). After applying Roly Poly 160 App, Satisfaction score was 3.74 out of 5 points

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.120-123
• /
• 2014

Thermal doping method using furnace is generally used for solar-cell wafer doping. It takes a lot of time and high cost and use toxic gas. Generally selective emitter doping using laser, but laser is very high equipment and induce the wafer's structure damage. In this study, we apply atmospheric pressure plasma for solar-cell wafer doping. We fabricated that the atmospheric pressure plasma jet injected Ar gas is inputted a low frequency (1 kHz ~ 100 kHz). We used shallow doping wafers existing PSG (Phosphorus Silicate Glass) on the shallow doping CZ P-type wafer (120 ohm/square). SIMS (Secondary Ion Mass Spectroscopy) are used for measuring wafer doping depth and concentration of phosphorus. We check that wafer's surface is not changed after plasma doping and atmospheric pressure doping width is broaden by increase of plasma treatment time and current.