• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.19-24
• /
• 1999

In\sub 2\O\sub 3\ 계 산화물 반도체형 후막센서의 ppb 범위의 오존에 대한 감지특성을 살펴보았다. In\sub 2\O\sub 감지막은 오존에 감도가 상당히 높았지만 안정된 신호를 얻을 수 없었다. In\sub 2\O\sub에 3wt.% 의 Fe\sub 2\O\sub 3\를 첨가한 경우에는, 순수한 In\sub 2\O\sub 와 비교할 때 응답 시간과 감도에 있어서 감지 특성의 향상이 관찰되었지만, 센서 신호가 시간에 따라 계속 증가되는 경향은 크게 개선되지 않았다. 그러나 In\sub 2\O\sub:Fe\sub 2\O\sub 3\ 혼합 분말의 열처리는 감도가 감소하기는 하였지만 센서의 오존 응답 및 회복 특성을 증진시켰다. 특히 1300℃ 정도의 고온에서 혼합 분말을 열처리 하여 제조한 감지막은 감도의 감소는 있었지만 550℃ 의 측정 온도에서 빠른 응답 및 회복 특성과 센서 신호가 최대값으로 빠르게 수렴함을 확인할 수 있었다. 또한 이들 센서는 오존에 대해 센서 신호의 선형적인 농도 의존성을 나타내었으며, 반복 실험을 행할 때 센서 신호의 재현성을 보여주었다. 따라서 본 연구에서 제조한 후 막 가스센서를 사용하여 ppb 범위의 오존 농도를 신뢰성있게 측정할 수 있음을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.371.2-371.2
• /
• 2016

Graphene electronics is one of the promising technologies for the next generation electronic devices due to the outstanding properties such as conductivity, high carrier mobility, mechanical, and optical properties along with extended applications using 2 dimensional heterostructures. However, large contact resistance between metal and graphene is one of the major obstacles for commercial application of graphene electronics. In order to achieve low contact resistance, numerous researches have been conducted such as gentle plasma treatment, ultraviolet ozone (UVO) treatment, annealing treatment, and one-dimensional graphene edge contact. In this report, we suggest a fabrication method of one-dimensional graphene metal edge contact without using graphene exfoliation. Graphene is grown on Cu foil by low pressure chemical vapor deposition. Then, the graphene is transferred on $SiO_2/Si$ wafer. The patterning of graphene channel and metal electrode is done by photolithography. $O_2$ plasma is applied to etch out the exposed graphene and then Ti/Au is deposited. As a result, the one-dimensional edge contact geometry is built between metal and graphene. The contact resistance of the fabricated one-dimensional metal-graphene edge contact is compared with the contact resistance of vertically stacked conventional metal-graphene contact.

• Elastomers and Composites
• /
• 제35권2호
• /
• pp.149-156
• /
• 2000

trans-octylene rubber(TOR)를 비상용성 블렌드인 NBR/EPDM(70/30)에 첨가하고, 이에 따른 혼합 특성 모폴로지 및 물성의 변화에 관하여 조사하였다. TOR이 첨가됨으로써 블렌드 시 혼합에너지가 감소하였고, 혼합 시 수반되는 온도상승도 저하됨을 볼 수 있었다. 블렌드의 모폴로지를 SEM으로 관찰한 결과, EPDM이 NBR 매트릭스에 분산된 형태인 것을 알았으며, TOR의 첨가에 의해 분산상인 EPDM상이 균일하고 미세해지는 것이 관찰되었다. TOR이 첨가됨으로써 NBR/EPDM의 인장강도, 파단신율 및 모듈러스 둥의 인장물성이 향상되었다. 오존저항성은 임계 응력-변형관계로부터 정량적으로 평가하였으며, TOR이 첨가된 블렌드에서 오존크랙을 일으키는 임계에너지값이 증가됨을 알 수 있었다. TOR의 첨가로 인한 NBR/EPDM 블렌드의 물성 향상은 모폴로지의 미세화와 사슬얽힘으로 인한 가교밀도의 변화 때문인 것으로 판단된다.

• Elastomers and Composites
• /
• 제7권1호
• /
• pp.38-44
• /
• 1972

As a series of the studies of EPDM-polymer blonds, the experiments are concentrated to the investigation of the physical properties of the EPDM-BR blends. The results are shown as follows: 1. In blending, tensile strength and elongation decreased with increase in EPDM contents. 2. The resistance for aging and ozone were much improved after blending. It was effective more :han the ratio of EPDM/BR is 50/50. 3. Tear strength is less influenced after blending and rebound character decreased with increase in EPDM contents.

• Elastomers and Composites
• /
• 제17권1호
• /
• pp.13-21
• /
• 1982

The purpose of this dissertation is to compare bound andtioxidant, MHPPD with the ordinary one, IPPD, when high polymers are used like NR and SBR. The effect of rubber bound antioxidant and ordinary antioxidant on the Mooney scorch time has been studied by means of the Mooney viscometer. The ageing properties of vulcanizates containing rubber-bound antioxidant and ordinary antioxidant have been studied in terms of hardness, tensile strength and elongation. The results of the Mooney scorch time and ageing properties are as follows: When MHPPD was mixed with NR or SBR compounds, the Mooney scorch time was faster than the IPPD compounds. Also the ageing properties of the vulcanizates containing MHPPD were much superior to the IPPD compounds. Furthermore, the vulcanizates comporised of MHPPD have taken andvantage of and resistance in the ozone test.

• Elastomers and Composites
• /
• 제6권2호
• /
• pp.65-72
• /
• 1971

The purpose of this study is to establish an effective way to utilize the application of EPDM-Polymer blends. First of all, the physical properties for EPDM/NR blends and compounding agents were studied. The results are shown as follows: 1. In blending, tensile strength and tear strength decreased with increase in EPDM contents. It was not effective more than the ratio of EPDM/NR is 50/50. 2. Elongation is influenced by blending, especially the ratio of EPDM/NR is 50/50. 3. It was found that both the resistance for ozone and aging were much improved after blending.

• 상하수도학회지
• /
• 제31권2호
• /
• pp.161-168
• /
• 2017

Microfiltration (MF) and Ultrafiltration (UF) membrane processes capable of producing highly purified water have been extensively applied as a pretreatment process in the wastewater reuse field with the improvement of membrane properties and resistance, development of operating protocols, and improvement of technologies of backwashing and physicochemical cleaning, and improvement of scale and antifoulants. However, despite of the development of membrane production and process technologies, fouling still remains unresolved. This study confirmed that foulants such as polysaccharides, proteins and humic substances existed in final treated effluent (secondary effluent) by fluorescence excitation emission matrix (FEEM) and fourier transform infrared spectroscopy (FTIR) analysis. In addition, when constructing ozone oxidation and coagulation processes as a hybrid process, the removal efficiency was 5.8%, 6.9%, 5.9%, and 28.2% higher than that of the single process using coagulation in turbidity, color, dissolved organic carbon (DOC), and UV254, respectively. The reversible and irreversible resistances in applying the hybrid process consisting of ozone oxidation and coagulation processes were lower than those in applying ozone oxidation and coagulation processes separately in UF membrane process. Therefore, it is considered possible to apply ozonation/coagulation as a pretreatment process for stable wastewater reuse by and then contributing to the reduction of fouling when calculating the optimal conditions for ozone oxidation and coagulation and then to applying them to membrane processes.

• Elastomers and Composites
• /
• 제6권1호
• /
• pp.71-81
• /
• 1971

The intention of this study is to investigate the properties of polymer blend, NBR/PVC vulcanizates and blending procedures such as roll-mixing temperatures and sequences for polymer blending of NBR and PVC(resin type). The results obtained are as follows: 1. The roll temperature applied for polymer blending is around $150^{\circ}C$. At this temperature region, the degradation of rubber stock, which may be caused by heat, can be minimized and mill processing in practical application in industries can also be facilitated. 2. It is obviously necessary that a small amount of plasticizers should be added to the stock for improving processibility of roll mixing and physical properties. 3. On roll-mixing sequence, it is more effective that PVC compounded with plasticizer is added to NBR milled on hot roll. 4. The vulcanizates of the blends with different degree of polymerization of PVC ale similar to one another in properties. 5. NBR/PVC(70/30) blends shows the better physical characters than eve,-made foreign latex blend except abrasion-resistance. 6. As PVC addition ratio is increased, the physical properties such as resistance to ozone, tear, heat and oil and tensile strength, modulus, hardness have also improved, on the other hand, tension set and rebound character decreased. 7. The curve of ultimate elongation have point of inflection at the ratio of $30\sim40$ part of PVC. 8. While CR is blended, the physical properties such as brittle point, rebound and resistance to oil in high temperature have improved. 9. Polymer blend of NBR and domestic PVC is applied for the industrial utility such as rubber sole and heel, electric wire cover and oil-resistant packing, coating and gasket, printing roll, film for food packing etc.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.41-46
• /
• 2000

Silicone rubbers are elastomeric materials and organic copolymers, of which backbone is siloxane with high bonding strength. Silicone rubbers have been used as an power insulator because they are well weather proof, ozone proof and have excellent electric characteristics, thermal stability, cold resistance and low surface energy. Especially, it is known that they have very excellent characteristics at 200[$^{\circ}C$]. For this study, we made silicone rubbers as specimens and measured volume resistivity due to applied voltage and a variation of temperature 25[$^{\circ}C$] to 180[$^{\circ}C$]. Also we measured dielectric loss tangent due to applied voltage at temperature range 25[$^{\circ}C$] to 180[$^{\circ}C$] and frequency range 20[Hz] to 1${\times}10^6$[Hz].

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.183-193
• /
• 1992

Compared with NR and HNBR compounds, the blend properties of NR/HNBR were studied. The heat, oil and ozone resistance of NR compounds were improved by blending HNBR, and these effects were more clearly revealed with elevating temperatures. For the overall stabilities of the compounds, it was resonable to use the carbon black under the 60phr. In the EV systems, high-saturated NR/HNBR and HNBR compounds showed similar total crosslink density in comparison with NR compounds. Interaction parameters calculated by stress-strain method showed widely varied value.