• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.353-357
• /
• 2004

The influences of the ozone oxidation, reaction temperature and NaOH equivalent ratio on the iron oxide formation were studied with fixed ferrous sulfate concentration(0.5M $FeSO_4$ㆍ$7H_2$O). Geothite($\alpha$-FeOOH) and/or Magnetite ($Fe_3$$O_4$) were synthesized depending on the reaction conditions. The characteristics of the synthesized powders were evaluated by XRD, SEM and quantitative phase analysis. The synthetic conditions to get Goethite were quite different from the results of Kiyama's and the Goethite was conveniently synthesized at low temperature and at low NaOH equivalent ratio.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.249-254
• /
• 2011

A nonthermal plasma reactor in conjunction with a tubular type with a ferroelectric (high-dielectric ceramic) pellet layer was designed and constructed. $SrBiTaO_9$ (SBT) pellets with 2.0 mm in diameter were held within the tube arrangement by two metal mesh electrodes (20 mm separation) connected to a high-voltage AC power supply. The dielectric constant of SBT pellets was 150 at room temperature and 500 at curie temperature ($335^{\circ}C$). The generation rate of ozone in the plasma reactor almost linearly increased with increasing applied voltage. In the case of the plasma reactor packed with SBT pellets the generation rate of ozone sharply increased at the applied voltage more than 20 kV. The ozone generation rate at the negative corona discharge was higher than that of the positive corona discharge. However, the destruction efficiency of toluene and methylene chloride was not increased in proportion to ozone concentration.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.743-750
• /
• 2008

In water treatment plant the Dissolved Ozone Flotation(DOF) System may be employed because this system has various abilities, such that it can remove SS using microbubbles, and it can exert strong oxidation power in removing taste and odor, color, and microbial agents. In order to investigate effectiveness of the DOF system in water treatment, removal characteristics of various water quality parameters were observed depending on the different levels of ozone concentrations. Removal efficiencies of water quality parameters in DOF system were compared with those in DAF(Dissolved Air Flotation) system and in CGS(Conventional Gravity Settling) system. Optimum ozone dose obtained in the pilot experiments was 2.7 mg/L. With increasing ozone dose higher than 2.7 mg/L, removal rates of turbidity, KMnO$_4$ consumption, UV$_{254}$ absorbance, and TOC were reversely lowered. High concentration of ozone dissociate organic matter in water, so that increasing dissolved organic level in effluent. Removal rates of water quality parameters at optimum ozone dose were obtained, such that removal rates of turbidity, KMnO$_4$ consumption, TOC, and UV$_{254}$ asorbance were 88.9%, 62.9%, 47%, and 77.3% respectively. Removal rate of THMFP was 51.6%. For all the parameters listed above, the DOF system was more effective than the DAF system or the CGS system. It is found that the DOF system may be used in advanced water treatment not only because the DOF system is more efficient in removing water quality parameters than the existing systems, but because the DOF system is also required smaller area than the CGS system for the treatment plant.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.191-201
• /
• 2018

In this present study, we, for the first time, retrieved total column of ozone ($O_3$) and tropospheric ozone vertical profile using the Optimal Estimation (OE) method based on the MAX-DOAS measurement at the Yonsei University in Seoul, Korea. The optical density fitting is carried out using the OE method to calculate ozone columns. The optical density between the MAX-DOAS data obtained by dividing the measured intensities for each viewing elevated angle by those at the zenith angle. The retrieved total columns of the ozone are 375.4 and 412.6 DU in the morning (08:13) and afternoon (17:55) on 23 May, 2017, respectively. In addition, under 10 km altitude, the $O_3$ vertical profile was retrieved with about 5% of retrieval uncertainty. However, above 10 km altitude, the $O_3$ vertical profile retrieval uncertainty was increased (>10%). The spectral fitting errors are 16.8% and 19.1% in the morning and afternoon, respectively. The method suggested in this present study can be useful to measure the total ozone column using the ground-based hyper-spectral UV sensors.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E3
• /
• pp.129-142
• /
• 2002

This paper provides a long-term perspective for ozone concentrations at 20 national air quality monitoring sites in Seoul from 1989 to 1998, which were managed by the Korean Ministry of Environment. Ozone episodes occurred more frequently in the east areas (Bangi, Guui, Seongsu, and Ssangmun) than in the west area (Guro and Oryu). When an ozone episode happened, hourly ozone concentrations over 80 ppb continued for an average of 4.0 hours at all sites. Annual variations in daily mean and maximum oBone concentrations showed broadly consistent upward trends at Ssangmun and Gwanaksan. Monthly mean ozone concentrations were the highest from May to June and the 99$^{th}$ and 95$^{th}$ percentile levels appeared higher during June, July, and August. The diurnal patterns of hourly mean ozone levels in urban areas showed typical photochemical formation and destruction, while the flat diurnal shape before 1996 at Gwanaksan indicated few significant photochemical reactions due to a lack of precursors of ozone. The occurrence of ozone over 80 ppb was ascribed to meteorological conditions such as high temperature, strong solar radiation, low relative humidity, and low wind speed with winds most frequently in a westerly direction.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.173-186
• /
• 2015

In Bangladesh, increases in the tropospheric ozone ($O_3$) concentration and in soil salinization may lead to crop damage. To clarify the effects of $O_3$ and/or soil salinity on Bangladeshi wheat cultivars, BAW1059 (salt-tolerant) and Shatabdi (salt-sensitive) were exposed to 70-day treatments with $O_3$ (charcoal-filtered air (CF), $1.0{\times}O_3$, and $1.5{\times}O_3$) and different levels of soil salinity (0, 4, and $8dS\;m^{-1}$). In both cultivars, the whole-plant dry mass and grain yield were significantly reduced by exposure to $O_3$. Increased soil salinity caused significant reductions in whole-plant growth and yield in Shatabdi, but the reductions were negligible in BAW1059. No significant interactions between $O_3$ and salinity were detected for growth, yield, and leaf gas exchange parameters in both cultivars. We concluded that the effects of $O_3$ are not ameliorated by soil salinity in two Bangladeshi wheat cultivars, regardless of their salinity tolerance.

• Applied Chemistry for Engineering
• /
• v.28 no.2
• /
• pp.193-197
• /
• 2017

In this study, we report on the catalyst process installed in conjunction with a wet plasma electrostatic precipitator to remove the oil mist and fine dust emitted from large-size grill restaurants. The multi-stage catalyst module reduced odor through catalytic reaction of acetaldehyde on catalysts even at an ambient temperature with ozone as an oxidant readily produced in a wet plasma electrostatic precipitator. Two types of manganese-based catalysts, $Mn_2O_3$ and $CuMnO_x$ were fabricated by extrusion molding for structured catalysts in practical applications, and the optimum conditions for high removal efficiencies of acetaldehyde and ozone were determined. When two optimized catalysts were applied in a two-stage catalyst module, the removal efficiency of acetaldehyde and ozone were ${\geq}85%$ and 100% respectively at the space velocity of $10,000h^{-1}$ and the reaction temperature of $100^{\circ}C$.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.563-576
• /
• 2023

In this study nitrogen dioxide (NO₂), formaldehyde (HCHO) from the Ozone Monitoring Instrument (OMI) and TROPOspheric Monitoring Instrument (TROPOMI), OMI/ Microwave Limb Sounder (MLS) tropospheric column ozone (TCO), and Airkorea ground-based O₃ data were analyzed to examine the photochemical reaction relationship between tropospheric ozone and its precursors nitrogen oxides (NOx) and volatile organic compounds (VOCs). As a result of analyzing the trend of long-term changes from 2006 to 2020 using OMI satellite data, TCO showed an increasing trend, NO₂ steadily decreased, and HCHO continued to increase in Northeast Asia. In addition, formaldehyde nitrogen dioxide ratio (FNR; HCHO/NO₂ ratio), an indicator of ozone sensitivity, is gradually increasing, which means that the VOC-limited regime is decreasing. This study conducted a sensitivity analysis of ozone generation using TROPOMI FNR and ground-based ozone (O₃) over the recent years (2019~2022) to identify the possible cause for the continuous increase of ozone in Korea. Similar to the previous studies, VOC-limited and transitional regimes appeared in megacities, and VOC-limited regimes also appeared in areas where major power plants were located. In VOC-limited regimes, in other words, areas where NOx is excessively saturated, the reduction in NOx emissions may have weakened the ozone titration and thus led to the increase of ozone. Therefore, VOC emissions should be reduced in the short term rather than NOx emissions to reduce ozone concentrations under the VOC-limited regime.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.213-213
• /
• 2011

Gold catalysts supported on TiO2 have shown a unique catalytic behavior on CO oxidation, depending on surface effects. Particle size has an influence on the surface activity. To make monodisperse Au nanoparticles, organic capping ligands, such as alkylthiols, were used by a "greener" synthesis method [1,2] and Au nanoparticles were deposited on TiO2. However, organic capping ligands must be removed for high catalytic activities by the Au nanoparticles without changing the Au size [3]. We used UV ozone treatment to decompose thiol ligands. The samples have been characterized by X-ray photoelectron spectroscopy to examine the surface modification by UV ozone treatment. We show the size distribution of the gold nanoparticles by light scattering analysis and transmission electron microscopy. Au/TiO2 have been prepared using the wetness impregnation method. The catalytic performance of CO oxidation over Au supported on TiO2 under oxidizing reaction conditions (40 Torr CO and 100 Torr O2) were tested. The results show that the catalytic activity depends on particle size and the time of UV ozone exposure, which suggests the role of sulfur bonding in determining the catalytic activity of Au/TiO2 catalysts.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.251-257
• /
• 2011

The processes for the preparation of ZnO powder by using EAF(electric arc furnace)dust was studied by wetting method which are divided to two steps, carried out of the elution processes by various concentrations of sulfuric acid is reacted with EAF dust as the former, and the latter were performed by a number of specified processes, which are leaching process depends on various pH, cementation, ozone and heat treatment processes etc. Experimental results showed that the appropriate pH range is pH7.5~8.0 and the resulting zinc content is range of 37~38%, the residual quantities of the heavy metals are less than 3ppm individually by cementation process except Mn, even though the Mn metal could not be removed by cementation process but was removed up to 0.2ppm by the ozone process from 70ppm initially. Finally, 80.2% of ZnO was obtained by the heat treatment at $500^{\circ}C$.