• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.6
• /
• pp.577-585
• /
• 2014

A series of experiments using atmospheric-pressure non-thermal plasma coupled with transition metal catalysts were performed to remove ethylene from agricultural storage facilities. The non-thermal plasma was created by dielectric barrier discharge, which was in direct contact with the catalyst pellets. The transition metals such as Ag and $V_2O_5$ were supported on ${\gamma}-Al_2O_3$. The effect of catalyst type, specific input energy (SIE) and oxygen content on the removal of ethylene was examined to understand the behavior of the hybrid plasma-catalytic reactor system. With the other parameters kept constant, the plasma-catalytic activity for the removal of ethylene was in order of $V_2O_5/{\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ from high to low. Interestingly, the rate of plasma-catalytic ozone generation was in order of $V_2O_5/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$, implying that the catalyst activation mechanisms by plasma are different for different catalysts. The results obtained by varying the oxygen content indicated that nitrogen-derived reactive species dominated the removal of ethylene under oxygen-lean condition, while ozone and oxygen atoms were mainly involved in the removal under oxygen-rich condition. When the plasma was coupled with $V_2O_5/{\gamma}-Al_2O_3$, nearly complete removal of ethylene was achieved at oxygen contents higher than 5% by volume (inlet ethylene: 250 ppm; gas flow rate: $1.0Lmin^{-1}$; SIE: ${\sim}355JL^{-1}$).

• Electrical & Electronic Materials
• /
• v.16 no.9
• /
• pp.62.2-62
• /
• 2003

Material Characteristics of zirconium oxide thin films obtained by plasma enhanced chemical vapor deposition on p-type Si(100) substrates were investigated to explain their unable electrical properties. The films obtained without heating had polycrystalline nanograins that are mostly of a tetragonal phase under oxygen-deficient plasma conditions but transformed into a monoclinic phase with increasing $O_2$ addition in the plasma. Mostly amorphous bulk $ZrO_2$ with a relatively thicker and smoother interfacial layer was obtained from oxygen-rich plasmas, resulting in a decrease in both the overall dielectric constant and the leakage current density. the interfacial layer formed between the bulk $ZrO_2$ and Si substrate was analyzed to be zirconium silicate, which approached $SiO_2$ as its zirconium content decreased with the increasing gas phase $O_2$ content.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.205-206
• /
• 2012

A novel torrefaction process is suggested to improve energy efficiency and to produce high quality biomass fuel. Major developments for novel torrefaction process are as follows. To maximize the energy efficiency in heat transfer, flue gas is directly used for heat source in the torrefier. To accomplish the oxygen free environment in the torrefaction reactor, a burner is developed and it can be runned with fuel rich state. To use the calorific gases produced from torrefier, another burner is developed to combust them. In the test, the novel torrefaction process leads low energy consumption and the quality of torrefied fuel becomes better.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.487-488
• /
• 2008

SiOC films containing alkyl groups have a low dielectric constant because of the interaction between the C-H hydrogen bonds and the oxygen of high electro-negative atom. The Si-$CH_3$ in a void is broken by the $O_2$, therefore the strength of CH bond in Si-O-O-$CH_3$ bond increases. The Si-O-O-$CH_3$ bond is broken by nucleophilic attack due to Si atom, again. The elongation of C-H bond causes the red shift, and the compression of C-H bond causes the blue shift. Among these chemical shifts, the blue shift from $1000\;cm^{-1}$ to $1250\;cm^{-1}$ was related with the formation of pores. If the oxygen is deficient condition, the methylradicals of the electron-rich substitution group terminate easily the Si-O-Si cross-link, and the pore is originated from the cross-link breakdown due to much methyl radicals of Si-$CH_3$. The dielectric constant of the films decreases due to pore generation.

• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1071-1077
• /
• 2009

A novel pretreatment technique was applied to the conventional Pt/alumina catalyst to prepare for the highly efficient catalyst for the preferential oxidation of carbon monoxide in hydrogen-rich condition. Their performance was investigated by selective CO oxidation reaction. CO conversion with the oxygen-treated Pt/Alumina catalyst increased remarkably especially at the low temperature below $100^{\circ}C$. This result is promising for the normal operation of the proton exchange membrane fuel cell (PEMFC) without CO poisoning of the anode catalyst. XRD analysis results showed that metallic Pt peaks were not observed for the oxygen-treated catalyst. This implies that well dispersed small Pt particles exist on the catalyst. This result was continued by high resolution transmission electron microscopy (HRTEM) analysis. Consequently, it can be concluded that highly dispersed Pt nanoparticles could be prepared by the novel pretreatment technique and thus, CO conversion could be increased considerably especially at the low temperatures below $100^{\circ}C$.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.169-177
• /
• 1993

Observed spectra of supernovae allow the empirical classification of supernovae into two basic categories, Type I with little or no evidence of hydrogen, and Type II with obvious evidence for hydrogen. The broad class of Type I can be subdivided depending on whether helium or silicon and other intermediate mass elements is observed. Understanding the physical processes that underlie these classifications---the progenitor evolution. the explosion mechanism, and end products---requires calculation of radiative transfer and model spectra. While most Type II occur in evolved massive stars that undergo core collapse. some may span the dividing line between degenerate and non-degenerate carbon burning and involve both core collapse and thermonuclear explosion. Type Ia are still most plausibly explained as thermonuclear explosions in carbon/oxygen white dwarfs in binary systems. Type Ib reveal helium atmospheres and are probably the result of core collapse in the helium core of a massive star that has lost its hydrogen envelope to a binary companion or to a wind. Type Ic supernovae are probably related to Type Ib but have also lost their helium envelope to reveal a mantle rich in oxygen.

• Journal of The Korean Astronomical Society
• /
• v.14 no.1
• /
• pp.19-35
• /
• 1981

Calculations of molecular number densities as a function of optical depth in selected umbral, penumbral and photospheric models predict penumbral enhancement of diatomic molecules containing carbon atoms, strong umbral enhancement of oxides, and moderate umbral enhancement of hydrides. The role of CO formation in an oxygen rich atmosphere is discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.218-219
• /
• 1997

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.155-160
• /
• 1990

Al-rich Mg-Al spinel single crystals were grown by Verneuil process using oxygen and hydrogen flame. Spinel single crystals were grown in chemical compositions from MgO : Al2O3 mole ratio 1 : 1 to 1 : 3. Mole ratio 1 : 1 was hard to be grown and mole ratio 1 : 2.5 and 1 : 3 were grown well. Selecting well-grown mole ratio 1 : 3, seeds were prepared having [100], [110] and [111] orientation respectively. Growth rate were highest in [100] orientation and lowest in [111] orientation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.56-60
• /
• 2006

It is essential to predict thermodynamic properties of combustion gas with respect to a propellant mixture ratio for the development of a gas generator for a liquid rocket engine. The present study shows the temperature measurement of exit combustion gas as a function of a mixture ratio through the series of combustion tests of a fuel-rich gas generator with liquid oxygen and Jet A-1. The measurements of dynamic and static pressures, and combustion gas temperatures allowed the estimation of thermodynamic properties like a specific heat ratio, a gas constant, and a constant pressure specific heat of the combustion gas. The comparison of the experimental results with predictions made by interpolation parameters obtained from the modification of the chemical equilibrium code indicates that the interpolation method calibrated using the temperature measurements can be utilized as an effective tool for the initial design of a fuel-rich gas generator.