• 자원환경지질
• /
• 제25권3호
• /
• pp.233-243
• /
• 1992

옥산지역에 위치하는 황학동광상은 초기백악기 퇴적암류내에 발달한 열극을 충진한 열수맥상 광상으로, 구조운동에 수반되어 3회에 걸쳐 생성된 석영 및 방해석맥으로 구성된다. 주된 금속광물로는 황철석, 자류철석, 황동석, 섬아연석, 방연석, 적철석 및 Ag-, Pb-, Bi-sulfosalts로, 이들의 침전은 주로 광화 제 1 기의 0.5~7.6 wt.% NaCl 상당염농도를 갖는 광화유체로부터 $370^{\circ}C$ 에서 약 $200^{\circ}C$ 에 걸쳐 진행되었으며, 광화 작용시의 압력은 <180 bar, 섬도는 700~2,400 m 였다. 광상내에서 보여주는 광물공생관계에 의한 열역학적 고찰과 유체포유물 및 안정동위원소 연구결과 등으로 미루어 본 광상광화유체내 Cu는 주로 chloride complex 상으로 이동되었으며, 주로 광화유체의 냉각작용과 이에 의한 지화학적 환경요인들($fs_2$, $fo_2$, pH)의 변화에 기인하여 침전되었음을 알수 있다. 유황안정동위원소 연구결과, 주광화시기인 광화1기중 광화유체의 ${\delta}^{34}S_{H_2S}$ 값이 초기 8.2‰ 에서 후기 4.7‰ 로 점차 감소함은 광화유체의 비등에 수반되어 수소이온농도와 함께 산소분압이 점진적으로 증가한 결과로 해석되며, 광화유체의 수소 및 산소동위원소 값으로부터 열수계에서 천수가 지배적인 역할을 하였음을 알수 있다.

• 자원환경지질
• /
• 제29권6호
• /
• pp.677-687
• /
• 1996

북창광산은 옥천 변성대에 위치하며 $N20{\sim}30^{\circ}E$ 방향의 기존 열극구조를 충진하여 배태된 열극 충진 광상이다. 공생광물군에 대한 연구결과 광화작용은 크게 2 시기로 나눌 수 있다. I기 : 대부분 유화광물의 생성시기, II기 : 후기 유화광물, 엘렉트럼 및 함은광물의 생성시기. 북창광산에서 산출되는 은광물은 주로 휘은석이며 그외 소량으로 canfieldite, tetrahedrite 등이다. 또한 에렉트럼은 Au-Ag의 원자량비에서 거의 1 대 1에 가까운 매우 한정된 조성을 보였다. 북창광산의 생성온도, 염농도 및 압력은 유체포유물 및 유황동위원소를 이용하여 측정되었으며 다음과 같다. I기 : $174{\sim}250^{\circ}C$, 0.35~4.01 NaCl eq. wt%, 0.40~1.00 Kbar, II기 : $138{\sim}222^{\circ}C$, 1.9~8.4 NaCl eq. wt%, 0.22~0.53 Kbar로 나타난다. 초기 광화작용동안 산소분압 및 유황분압은 공생광물군의 상평형관계에 근거하여, 각각 $10^{-39.7}{\sim}10^{-44.7}atm.$ and $10^{-13.4}{\sim}10^{-18.1}atm.$으로 나타난다. 이와 같은 연구결과 북창광산은 Polymetallic epithermal type의 광상으로 생각된다.

• 자원환경지질
• /
• 제28권6호
• /
• pp.541-551
• /
• 1995

The Yeongdeog gold-silver deposits at Jipum, Gyeongsangbugdo, is of a middle Paleogene $(45.52{\pm}1.02Ma)$ vein type, and is hosted in shale and sandstone of Cretaceous age. Based on mineral paragenesis, vein structure and mineral assemblages, the ore mineralization can be divided into two distinct depositional stages. The early stage is associated with base-metals such as pyrite, arsenopyrite (27.99~30.99 at%), hematite, rutile, pyrrhotite, sphalerite (10.53~18.42 FeS mole%), chalcopyrite and galena with wallrock alteration such as chlorite, sericite and pyrite. The late stage is characterized by the Au-Ag mineralization such as electrum, Ag-bearing tetrahedrite, freibergite, pyrargyrite, unidentified mineral, pyrite, sphalerite (1.08~5.57 FeS mole%), chalcopyrite and galena. Fluid inclusion data indicate that fluid temperatures and salinities range from 343 to $227^{\circ}C$ and from 8.3 to 5.7 wt% eq. NaCl in early stage, respectively. Temperatures and salinities of NaCl eq. wt% range from 299 to $225^{\circ}C$ and from 12.9 to 4.3 in late stage, respectively. They suggest that complex cooling histories were occured by the mixing of the fluids. Sulfur fugacity $(-logfs_2)$ deduced by mineral assemblages and composition ranges from 8.3 to 14.7 atm. in early stage, and from 8.8 to 14.5 atm. in late stage. It suggests that the mineralization was related to decrease of temperature in early stage and fluctuations of $fS_2$ with decrease of temperature in late stage. Sulfur and oxygen isotope compositions are 4.48~5.60‰ and 9.25~10.8% in early stage, and late stage is 4.84~7.00‰ and 5.7‰, respectively. It indicated that hydrothermal fluids may be magmatic origin with some degree of mixing of another water during paragenetic time.

• 기본간호학회지
• /
• 제11권2호
• /
• pp.203-212
• /
• 2004

Purpose: This study was done to determine whether providing auditory and vestibular stimulation to preform infants would have an effect on stress hormones. Methods: The design was a nonequivalent control group protest-posttest design in a quasi-experimental study Seventy-nine preform infants were assigned either one of two experimental groups or to a control group: 27 in the auditory stimulation group, 25 in the vestibular stimulation group and 27 in the control group. The criteria for inclusion in this study were 1) gestational age of less than 37 weeks, 2) birth weight of less than 2,500g, 3) the absence of congenital anomalies or specific diseases, 4) recovering physiological weight loss, and 5) weaned from ventilatory assistance or oxygen. The data were collected from March 2002 to May 2003. The auditory stimulation, a music audiotape, was provided 20 minutes twice a day for 10 days and the vestibular stimulation, an infant waterbed, was provided for 10 days. On day 1 and day 10 of the study, 24 hour urine sample was collected for norepinephrine, epinephrine, and cortisol assays. In the data analysis SPSSWIN 10.0 program was utilized for descriptive statistics, ANOVA and t-test. Results: General characteristics of the three groups showed no significant differences, thus three groups were found to be homogenous. The 24 hour urine cortisol for the auditory (t=3.489, p=.001) and for the vestibular (t=2.638, p=.013) stimulation group were significantly reduced compared to the control group after 10 days. Conclusions: The results suggest that auditory and vestibular stimulation can be used to reduce 24 hour urine cortisol in preform infants. Therefore, music audiotapes and waterbeds provided in incubator are be recommended for reduction of the stress in preform infants who are hospitalized in neonatal intensive care units.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.75-81
• /
• 2016

This study applied laser surface melting process using CW(Continuous wave) Yb:YAG laser and cold-work die steel SM45C and investigated microstructure and hardness. Laser beam speed, power and beam interval are fixed at 70 mm/sec, 2.8 kW and $800{\mu}m$ respectively. Depth of Hardening layer(Melting zone) was a minimum of 0.8 mm and a maximum of 1.0 mm that exceeds the limit of minimum depth 0.5 mm applying trimming die. In all weld zone, macrostructure was dendrite structure. At the dendrite boundary, Mn, Al, S and O was segregated and MnS and Al oxide existed. However, this inclusion didn't observe in the heat-affected zone (HAZ). As a result of interpreting phase transformation of binary diagram, MnS crystallizes from liquid. Also, it estimated that Al oxide forms by reacting with oxygen in the atmosphere. The hardness of the melting zone was from 650 Hv to 660 Hv regardless of the location that higher 60 Hv than the hardness of the HAZ that had maximum 600 Hv. In comparison with the size of microstructure using electron backscatter diffraction(EBSD), the size of microstructure in the melting zone was smaller than HAZ. Because it estimated that cooling rate of laser surface melting process is faster than water quenching.

• 대한간호
• /
• 제32권5호
• /
• pp.78-92
• /
• 1994

The purposes of this study were to evaluate the results of the hospital self inspection with the medical insurance and to offer basic materials to the medical insurance inspection and the education of medical insurance. The study was undertaken with 4,730 cases among the total 13,810 medical insurance in patients from Jan. 1990 to Dec. 1990 at one university hospital in Pusan. The major contents of the inspection were the omission of diagnosis and medical fee, curtailment, application mistake, the rates of inclusion, subtraction and total accumulation. The data were collected using patients charts and bills. The results of the paper analysis were as follows. 1. From the pre-discharge hospital self inspection, major omission were treatment and material fee but medication fee were moderately high and high curtailment was operation fee. 2. Decreasing order of operation fee adjustment were digestive(22.4%) muscular(22%) and neuro system operation(21.4%). Majority of the medication fee adjustments were injection form of medication(95.7%). 50% of the treatment fee adjustments were composed of injection fee(27.9%) and dressing or post-operative dressing fee(22.3%). 74.7% of material costs were composed of oxygen(30.6%), blood and the blood composed materials(44.1%). 3. Pre-discharge inspection showed 6% adjustment rate, 4.3% addition and 2.1% curtailment rate. Most of the adjustment were omission(66.1%). 4. Omission were divided by event omission(92.6%)and application mistake(7.4%). The decreasing order of omission fee were operation(21.84%), treatment(18.71 %) diagnosis(18.68%), medication (14.53%) and material costs(10.84%). So operation and treatment part were the major part of the total omission fee(40.55%). 5. The average omission of diagnosis were 1,800 per month.

• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.

• Journal of Trauma and Injury
• /
• 제33권2호
• /
• pp.88-95
• /
• 2020

Purpose: The present study will identify risk factors for aspiration in severe trauma patients by comparing patients who showed a sign of aspiration lung disease on chest computed tomography (CT) and those who did not. Methods: We conducted a retrospective review of the Korean Trauma Data Bank between January 2014 and December 2019 in a single regional trauma center. The inclusion criteria were patients aged ≥18 years with chest CT, and who had an Injury Severity Score ≥16. Patients with Abbreviated Injury Scale (AIS)-chest score ≥1 and lack of medical records were excluded. General characteristics and patient status were analyzed. Results: 425 patients were included in the final analysis. There were 48 patients showing aspiration on CT (11.2%) and 377 patients showing no aspiration (88.7%). Aspiration group showed more endotracheal intubation in the ER (p=0.000) and a significantly higher proportion of severe Glasgow Coma Scale (GCS) (p=0.000) patients than the non-aspiration group. In AIS as well, the median AIS head score was higher in the aspiration group (p=0.046). Median oxygen saturation was significantly lower in the aspiration group (p=0.002). In a logistic regression analysis, relative to the GCS mild group, the moderate group showed an odds ratio (OR) for aspiration of 2.976 (CI, 1.024-8.647), and the severe group showed an OR of 5.073 (CI, 2.442-10.539). Conclusions: Poor mental state and head injury increase the risk of aspiration. To confirm for aspiration, it would be useful to perform chest CT for severe trauma patients with a head injury.

• 한국화재소방학회논문지
• /
• 제24권5호
• /
• pp.128-135
• /
• 2010

본 연구에서는 구획화재로부터 발생되는 화학종의 특성을 파악하기 위해서 혼합분율분석을 수행하였다. 메탄, 헵탄 그리고 톨루엔과 같은 탄화수소 연료들을 사용한 화재 실험이 ISO 9705 표준 화재실에서 수행되었으며 상층부의 두 지점에서 가스종 농도와 그을음(soot) 분율 등을 측정하였다. 미연탄화수소(UHC), 일산화탄소(CO), 이산화탄소($CO_2$), 산소($O_2$) 그리고 그을음 등의 측정된 화학종에 대한 질량분율을 혼합분율의 함수로 나타내었고, 탄화수소 연료의 이상적인 반응식에 기초한 상태 관계식과 비교 분석하였다. 혼합분율 분석은 다양한 화재 조건 및 측정 위치에서 얻은 수많은 측정데이터를 하나의 일관된 파라미터, 즉 혼합분율의 항으로 분류할 수 있게 하였다. 해석 결과를 통해 혼합분율 계산에 그을음을 고려하는 것이, 특히 헵탄이나 톨루엔과 같이 그을음 발생이 큰 연료의 경우 분석의 정확성을 향상시킴을 확인하였다.

• 자원환경지질
• /
• 제24권2호
• /
• pp.107-129
• /
• 1991

The Yonghwa gold-silver deposits are emplaced along $N15^{\circ}{\sim}25^{\circ}W$ trending fissures in middle Cretaceous porphyritic granite or Precambrian Sobaegsan gneiss complex. The results of paragenetic studies suggest that vein filling can be subdivided into four identifiable stages; state I: the main sulfide stage, characterized by base-metal sulfide minerals, iron oxides and minor electrum, stage II: electrum stage, stage III: electrum and silver-bearing sulfosalts stage, stage IV: post ore stage of carbonates and quartz. The ore mineralogy suggests that depositional temperature of the formation of the gold and silver minerals are estimated as 200 to $250^{\circ}C$ and 140 to $180^{\circ}C$, respectively. Sulfur fugacity of the formation of the gold and silver minerals are estimated as $10^{-14.0}$ to $10^{-12.2}$ atm and $10^{-18.5}$ to $10^{-17.2}$ atm, respectively. A consideration of the pressure regime during ore deposition bases on the fluid inclusion evidence of boiling suggests lithostatic pressure of less than 180 bars. This range of pressure indicate that vein system lay at depth of 700m below the surface at the time during mineralization. Salinities of ore-bearing fluids range from 0.4 to 6.9 wt.% equivalent NaCl. The sulfur and carbon isotopic data reveal that these elements were probably derived from a deep-seated source. The ${\delta}^{18}O$ of the hydrothermal fluid was determined from ${\delta}^{18}O$ values of quartz and calcite. Oxygen and hydrogen isotopic studies reveal that meteoric water dominate over ore-bearing fluid.