• 한국재료학회지
• /
• 제27권12호
• /
• pp.710-715
• /
• 2017

We synthesized YOF(yttirum oxyfluoride) powders through solid state reactions using $Y_2O_3$ and $YF_3$ as raw materials. The synthesis of crystalline YOF was started at $300^{\circ}C$ and completed at $500^{\circ}C$. The atmosphere during synthesis had a negligible effect on the synthesis of the YOF powder under the investigated temperature range. The particle size distribution of the YOF was nearly identical to that of the mixed $Y_2O_3$ and $YF_3$ powders. When the synthesized YOF powders were used as a raw material for the suspension plasma spray(SPS) coating, the crystalline phases of the coated layer consisted of YOF and $Y_2O_3$, indicating that oxidation or evaporation of YOF powders occurred during the coating process. Based on thermogravimetric analysis, the crystalline formation appeared to be affected by the evaporation of fluoride because of the high vapor pressure of the YOF material.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.413-419
• /
• 2022

An oxyfluoride glass ceramic containing Eu²⁺-doped nepheline and LaF₃ crystals was modified, with BaF₂ replacing LaF₃ up to 20 mole percent, and its luminescence change was monitored. With increasing BaF₂ content, the greenish yellow emission centered at 540 nm under 400-nm excitation decreased, and a new afterglow emission from the modified ceramic was observed after removal of the excitation light source. X-ray diffraction (XRD) and transmission electron microscopy with energy dispersive spectroscopy (TEM-EDS) were used to investigate the changes in the crystalline phases within the glass matrix. Time dependent emission intensity was monitored to observe the afterglow, and the possible mechanism for the afterglow due to BaF₂ addition was considered.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.644-649
• /
• 2011

[ $A_{3-2x/3}Al_{1-z}In_{z}O_4F:Eu_x^{3+}$ ](A = Ca, Sr, Ba, x = -0.15, z = 0, 0.1) oxyfluoride phosphors were simply prepared by the solid-state method at $1050^{\circ}C$ in air. The phosphors had the bright red photoluminescence (PL) spectra of an $A_{3-2x/3}Al_{1-z}In_{z}O_4F$ for $Eu^{3+}$ activator. X-ray diffraction (XRD) patterns of the obtained red phosphors were exhibited for indexing peak positions and calculating unit-cell parameters. Dynamic excitation and emission spectra of $Eu^{3+}$ activated red oxyfluoride phosphors were clearly monitored. Red and blue shifts gradually occurred in the emission spectra of $Eu^{3+}$ activated $A_3AlO_4F$ oxyfluoride phosphors when $Sr^{2+}$ by $Ca^{2+}$ and $Ba^{2+}$ ions were substituted, respectively. The concentration quenching as a function of $Eu^{3+}$ contents in $A_{3-2x/3}AlO_4F:Eu^{3+}$ (A = Ca, Sr, Ba) was measured. The interesting behaviors of defect-induced $A_{3-2x/3}Al_{1-z}In_{z}O_{4-{\alpha}}F_{1-{\delta}}$ phosphors with $Eu^{3+}$ activator are discussed based on PL spectra and CIE coordinates. Substituting $In^{3+}$ into the $Al^{3+}$ position in the $A_{3-2x/3}AlO_4F:Eu^{3+}$ oxyfluorides resulted in the relative intensity of the red emitted phosphors noticeably increasing by seven times.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.624-628
• /
• 2003

Lanthanum oxyfluoride can be synthesized by mechanochemical (MC) reaction between lanthanum oxide ($La_2O_3$) and polytetrafluoroethylene (PTFE, ($({CF_2CF_2}_n)$) in air using a planetary mill. MC reaction between the two materials induced from intensive grinding operation. The MC reaction is almost finished by 240min, and the products ground for 240min or more are composed of LaOF, amorphous $La(CO_3)F$ and amorphous carbon (C). Heating this MC reaction products at $600^{\circ}C$ enables us to eliminate amorphous C and decompose $La(CO_3)F$ into LaOF, so that pure LaOF material can be obtained as the final product. The average particle size of the final product (purified LaOF) is around few ten nanometers.

• 한국결정성장학회지
• /
• 제33권5호
• /
• pp.181-186
• /
• 2023

본 연구에서는 containerless processing 법을 활용하여 새로운 형광 소재용 Eu₂O₃-BaF₂-La₂O₃-B₂O₃ 계 유리 및 결정화 유리를 개발하였다. 또한 조성 및 결정화 정도에 따른 유리의 열적, 광학적, 구조적 특성 변화를 분석하였다. 유리 조성에 따른 열적 특성은 DTA 분석을 통해 이루어졌으며, BaF2₂ 함량의 증가에 따라 유리전이온도 및 유리화능이 급격히 감소하는 것을 확인하였다. 유리의 결정화 특성은 XRD 분석을 통해 확인되었으며, BaF₂ 결정상의 결정화 정도에 따라 발광 효율이 증가하는 것을 확인할 수 있었다. 유리구조 내에서 fluorine 이온의 결합특성을 분석하기 위해 La 3d_5/2 XPS 및 F 1s XPS 스펙트럼을 분석하였다. fluorine 이온은 유리내에서 network modifier 역할을 하는 Ba²⁺ 및 La³⁺ 이온과 주로 결합하는 것을 확인할 수 있었고, 결정화 과정에서 La-F 결합이 감소하고 Ba-F 결합이 증가하는 것을 확인할 수 있었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.34.3-34.3
• /
• 2004

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.725-729
• /
• 2003

The fluorine doping along with heavy metal oxides remarkably raised the $^3$H$_4$ lifetime and the quantum efficiency in Tm$^{3+}$-doped silicate glasses. 29 mol% of fluorine substitution for oxygen in 70SiO$_2$-15Pbo-12ZnO-3KO$_{1}$2/ glass raised $^3$H$_4$ lifetime to 193 $mutextrm{s}$. Refractive indices were raised by heavy metal oxide substitution, but hardly changed by fluorine substitution. The fluorine doping changed the local structure around Tm$^{3+}$ions, then low energy vibrations related to fluorine are considered to largely reduce the multi-phonon relaxation rates in the oxyfluoride silicate glasses. The $^3$H$_4$ lifetimes and absorption and emission spectra of Tm$^{3+}$doped silicate and oxyfluoride silicate glasses are reported, and Judd-Ofelt calculation results are discussed in this paper.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.778-783
• /
• 2016

We synthesized $Er^{3+}-Yb^{3+}$, $Pr^{3+}-Yb^{3+}$, and $Er^{3+}-Pr^{3+}-Yb^{3+}$ -doped oxyfluoride glass ceramics containing $CaF_2$ nanocrystals by proper thermal treatments. Spectral characteristics of down- and up-converted emissions in three kinds of glass ceramics under 365-nm and 980-nm excitations were compared and explained by cross relaxations, excited-state absorptions, and energy-transfer processes between different ions. The huge reduction of up-conversion emission in the triply doped glass ceramics under 980-nm excitation compared to the $Er^{3+}-Yb^{3+}$ codoped one was explained by the split pump power and the direct energy transfer from $Er^{3+}$ to $Pr^{3+}$ ions. Increasing $Yb^{3+}$ concentration from 2% to 10% in the triply doped glass ceramics showed more than quadratic enhancement of the absorbed power, and we explained it by the enhanced energy-transfer efficiency from $Yb^{3+}$ to $Er^{3+}$ ions. We also observed enhanced up-converted emissions of $Er^{3+}$ and $Pr^{3+}$ ions in three kinds of glass ceramics under simultaneous excitation at 980 nm and 1550 nm, and suggested detailed up-conversion mechanisms.

• 한국결정성장학회지
• /
• 제31권6호
• /
• pp.276-281
• /
• 2021

반도체 회로를 제조하기 위해서 에칭, 세척, 증착 등의 공정들이 반복적으로 진행된다. 따라서 이러한 공정이 진행되면 진공장비 내부는 부식성이 높은 가혹한 플라즈마 환경에 노출되게 된다. 따라서 반도체 공정 장비의 내부를 플라즈마 노출에 강한 재료를 사용하여 코팅층의 에칭과 오염 입자의 생성을 최소화하여야 한다. 본 연구에서는 고상합성법에 의해 Y₂O₃와 YF₃ 분말을 원료물질로 옥시불화이트륨(YOF)를 성공적으로 합성하였다. Y₂O₃와 YF₃ 분말의 혼합비율은 1.0:1.0에서 1.0:1.6까지 조절하였으며, 혼합비율이 합성된 YOF 분말의 결정구조와 미세구조에 미치는 영향을 XRD와 FE-SEM으로 조사하였다. 합성된 YOF 분말을 이용하여 알루미늄 기판에 플라즈마 스프레이법으로 성공적으로 코팅하였다.

• 한국재료학회지
• /
• 제31권9호
• /
• pp.532-538
• /
• 2021

In this study, a spray dryer is used to make granules of Y₂O₃ and YF₃, and then Y₅O₄F₇ is synthesized following heat treatment of them under Ar gas atmosphere at 600 ℃. Single and binary monomer mixtures are compared and analyzed to optimize photocurable monomer system for DLP 3D printing. The mixture of HEA and TMPTA at 8:2 ratio exhibits the highest photocuring properties and low viscosity with shear thinning behavior. The optimized photocurable monomer and synthesized Y₅O₄F₇ are therefore mixed and applied to printing process at variable solid contents (60, 70, 80, & 85 wt.%) and light exposure times. Under optimal light exposure conditions (initial exposure time: 1.2 s, basic exposure time: 5 s), YOF composites at 60, 70 & 80 wt.% solid contents are successfully printed. As a result of measuring the size of the printed samples compared to the dimensions of the designed bar type specimen, the deviation is found to increase as the YOF solid content increases. This shows that it is necessary to maximize the photocuring activity of the monomer system and to optimize the exposure time when printing using a high-solids ceramic slurry.