• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1349-1352
• /
• 2009

We report the results of the surface chemistry of deuterized ethanol exposed Zircaloy-4 (Zry-4) surfaces with various amount of $C_2D_5$OD exposures at 190 K. This system was examined with Auger electron spectroscopy (AES) and temperature programmed desorption (TPD) techniques. In TPD study, $D_2$ was evolved at two different desorption temperature regions accompanying with broad desorption background. The lower temperature feature at around 520 K showed first-order desorption kinetics. The high temperature desorption peak at around 650 K shifted to lower desorption temperature as the exposure of $C_2D_5$OD increased. The Zr(MNV) Auger peak shifted about 2.5 eV from 147 eV to lower electron energy followed by 300 L of $C_2D_5$OD dosing. This implies metallic zirconium was oxidized by deuterized ethanol adsorption. After stepwise annealing of the oxidized Zry-4 sample up to 843 K, the shifted Zr(MNV) peak was gradually shifted back to metallic zirconium peak position. After the sample was heated to 843 K, the oxygen content near the Zry-4 surface was recovered to clean surface level. The concentration of carbon, however, was not recovered by annealing the sample.

• 한국식품과학회지
• /
• 제32권6호
• /
• pp.1213-1220
• /
• 2000

가열산화된 유지의 산패도와 돌연변이원성과의 관련성을 알아보고자 대두유를 $180{\pm}3^{\circ}C$에서 48시간 동안 가열산화시키면서 0, 8, 16, 24, 32, 40, 48시간 후의 유지시료와 여기서 분획한 산화물 및 비산화물을 대상으로 Salmonella typimurium 변이균주 중 구조이동형(frame shift) 변이균주인 TA98, TA1537과 염기치환형(base-pair substituent) 변이균주인 TA100, TA1535 및 TA102를 사용하여 Ames test를 수행한 결과는 다음과 같다. $180{\pm}3^{\circ}C$에서 48시간 가열산화된 대두유의 가열시간에 따른 돌연변이원성을 조사했을 때 직접법 [-S9] 및 대사활성화법 [+S9] 모두에서 돌연변이원성이 인정되지 않았다. 또한 $180{\pm}3^{\circ}C$에서 가열산화된 대두유를 산화물 및 비산화물로 분리하여 돌연변이원성을 조사한 결과 가열 16시간 및 24시간 후의 산화 물질에서 돌연변이 활성이 나타났다.

• 한국자기학회지
• /
• 제14권3호
• /
• pp.99-104
• /
• 2004

자기 터널 접합(Magnetic Tunnel Junction, MTJ)의 플라즈마 산화시간과 열처리 온도에 따른 자기저항(Tunneling Magnetoresistance, TMR) 온도의존특성을 연구하였다. 플라즈마 산화시간을 30$_{s}$ 70$_{s}$ 까지 10$_{s}$ 간격으로 변화시켜 측정한 결과, 산화시간 50초에서 상온에서 25.3%의 가장 높은 TMR 비를 얻었다. 스핀 분극도 $P_{0}$ 스핀파 지수(spin wave parameter) $\alpha$를 구한 결과, 산화시간 50$_{s}$ 에서 40.3%의 가장 높은 스핀 분극도와 가장 낮은 온도 의존 특성인 (10$\pm$4.742)${\times}$$10^{-6}$ $K^{－1.5}$스핀파 지수(spin wave parameter) $\alpha$값을 얻었다. 그리고 온도별 열처리 결과 175$^{\circ}C$에서 TMR비가 25.3%에서 27.5%까지 증가하였으며 스핀파 지수는 (10$\pm$0.719)${\times}$$10^{-6}$ K $^{－1.5}$ 까지 감소하여 온도의존도가 감소하였다.

• 한국식품영양과학회지
• /
• 제29권1호
• /
• pp.120-127
• /
• 2000

Deep-fat frying is a common cooking practice. There has been considerable concern regarding the mutagenic and carcinogenic potential of thermally oxidized oils. Studies on deep-fried foods so far have revealed not much on the mutagenicity of the oils in the foods. Therefore, in the present study, it was attempted to investigate the mutagenicity ofthe thermally oxidized safflower oil. Oil was heated in a home-fryer at a temperature of 180$\pm$3$^{\circ}C$ for 48 hours. Oil samples were taken at 0, 8, 16, 24, 32, 40 and 48 hours of heating, respectively. Each sample was used to study the changes in peroxide value (POV), acid value (AV), iodine value (IV), conjugated dienoic acid (CDA) content, %, and fatty acid composition. Another series of samples were fractionated into non-polar and polar fractions by column chromatography. The mutagenicity of the samples taken from the thermally oxidized oils, as well as the non-polar and polar fractions of the thermally oxidized oils, was investigated with the Ames test. The Ames test was carried out with and without metabolic activation. Bacterial tester strains used in the present study were the histidine auxotrophic strains of Salmonella typhimurium TA100, TA1535 and TA102 were used for the detection of base pair mutations, and TA98 and TA1537 for frame shift mutations. Each series of samples was dissolved in tetraphydrofuran (inhibitor-free) and tested at doses ranging from 0.05 to 5 mg/plate. None of the oil samples taken during the 48 hour oxidation period showed any mugagenic activity. This was the case, even after the activaton with 59 mix. Also, none of the polar and non-polar fractions showed any mutagenic activity on all the strains tested.

• 대한의생명과학회지
• /
• 제14권2호
• /
• pp.105-113
• /
• 2008

The objective of this study was to evaluate the influence of surface modifications on the bonding characteristics and cytotoxicity of specific titanium porcelain bonded to milling titanium and cast titanium. Milling titanium and cast titanium samples were divided into 8 test groups. These groups are as follow: i) sandblasted with particles of different size of $220{\mu}m\;and\;50{\mu}m$, ii) different sequences of sandblasting treatment and etching treatment, iii) etched with different etching solutions, and iv) preheated or not. The surface characteristics of specimens were characterized by the test of mean roughness of surface and SEM. The bond strength of titanium-ceramic systems was measured by using three-point bending test and SEM. The results show that the mean roughness of surface of sample sandblasted with $220{\mu}m$ aluminum oxide increased and bond strength were higher than sample sandblasted with $50{\mu}m$ aluminum oxide. The mean roughness of surface decreased, but the bond strength increased when the samples sandblasted with $220{\mu}m$ aluminum oxide were preheated. The sample sandblasted with $220{\mu}m$ aluminum oxide after oxidized with occupational corrosive agent I (50% NaOH, 10% $CuSO_4{\cdot}5H_2O$) and II (35% $HNO_3$, 5% HF) showed higher bond strength than sample oxidized with 30% $HNO_3$ after sandblasted with $220{\mu}m$ aluminum oxide. Group NaCuNF220SP (milling Ti: 35.3985 MPa, casting Ti: 37.2306 MPa) which was treated with occupational corrosive agent I (50% NaOH, 10% $CuSO_4{\cdot}5H_2O$) and II (35% $HNO_3$, 5% HF), followed by sandblasting with $220{\mu}m$ aluminum oxide and preheating at $750^{\circ}C$ for 1 hour showed the highest bond strength and significant differences (P<0.05). The method for modifying surface of titanium showed excellent stability of cells.

• 자원리싸이클링
• /
• 제11권5호
• /
• pp.7-10
• /
• 2002

Iron nitride magnetic fluid was oxidized by exposing it to the air under normal atmospheric conditions. After exposure of 3.2 hours, the relative saturation magnetization of the iron nitride magnetic fluid is less than 0.4 compared to the value of the unexposed sample, and it is nearly zero after exposure for 1008 hours. The structure of the oxidized iron nitride is considered to be a non-magnetic hematites. The thickness of the oxidation layers of the iron-nitride particles are nearly the same, about 3 nm, regardless of the different particle sizes.

• Preventive Nutrition and Food Science
• /
• 제8권4호
• /
• pp.315-320
• /
• 2003

Headspace volatile compounds of oxidized fish oil were analyzed by the combination of hexane solvent or solid phase microextraction, gas chromatography and mass selective detector. The optimum condition of headspace analysis by hexane trapping was 23 min absorption time, 96$^{\circ}C$ sample temperature and 20 mL/min air flow rate. The numbers of volatile compounds identified by solvent trapping and SPME were 35 and 14, respectively. Groups having the largest amount and many kinds were hydrocarbons and aldehydes, respectively. The numbers of aldehydes were 15 and 6 for solvent trap and SPME, respectively. These basic data could be used as indicators for the quality changes of fish oil.

• Mass Spectrometry Letters
• /
• 제12권3호
• /
• pp.118-124
• /
• 2021

Many previous studies have focused on revealing the harmfulness of microplastic particles, whereas very few studies have focused on the effects of chemicals, particularly photooxidation product. In this study, products of photodegradation from expanded polystyrene (EPS), compounds produced by photolysis by ultraviolet (UV) light, were investigated. EPS was directly irradiated and photolyzed using a UV lamp, and then the extracted sample was analyzed using high-resolution mass spectrometry (HRMS). Multiple ionization techniques, including electrospray ionization, atmospheric pressure chemical ionization, and atmospheric pressure photoionization, were used. In total, >300 compounds were observed, among which polystyrene monomer, dimer, and oxidized products were observed. In this work, the data presented clearly demonstrate that it is necessary to identify and monitor oxidized plastic compounds and assess their effect on the environment.

• 생명과학회지
• /
• 제12권2호
• /
• pp.144-150
• /
• 2002

쑥갓(Chrsanthemum coronarium L., CC)은 국화과(Compositae)에 속하는 일년생 초본식물로 독특한 향기를 가진 지중해 원산 식물이다. 우리 나라에는 중국을 거쳐 조선초기에 전해졌으며 시기용으로 널리 애용되고 있다. 본 연구는 쑥갓의 메타놀 분획물(CCMM), 헥산분획물(CCMH), 에틸아세테이트 분획물(CCMEA), 부타놀분획물 (CCMB) 및 수층인 CCMA 분획물을 얻고 각각 일정량을 불포화인지질인 L-$\alpha$-dilinoleoylphosphatidylcholine(DLPC) liposome에 가하고 benzoyl peroxide를 가하여 산화시켜 분광광도법에 의하여 산화지수 ( $A_{234nm}$/ $A_{202nm}$)를 측정 비교하였다. 그 결과 쑥갓의 각 분획물 일정량을 가한 경우의 DLPC liposome의 산화지수는 시료를 가하지 않은 경우보다 낮아 높은 항산화력을 나타내었으나 강한 항산화제인 BHT를 가한 경우 보다는 항산화 정도가 낮았다. 그러나 특히 본 연구에서 알려진 결과로는 쑥갓 분획물들의 항산화력이 널리 알려진 항산화제인 $\alpha$-tocopherol을 가한 경우와 그 효과가 비슷하여 식용으로 애용되고 있는 쑥갓의 항산화적 생리활성이 본 연구에서 입증되었으며 이 효과를 기초로하여 식물 속의 항산화성을 이용한 식품의 개발이 기대 된다.

• 대한금속재료학회지
• /
• 제48권8호
• /
• pp.730-740
• /
• 2010

Aluminum, magnesium, titanium and high Mn steel are difficult to use in electron backscatter diffraction (EBSD) sample preparation due to the formation of an oxidation layer under conventional polishing. Alcohol-based polishing with colloidal silica suspension was introduced for these delicate samples. A hard particle-embedded sample was analyzed successfully using mechanical polishing. Ion-milling was effective in removing oxidized, deformed and transformed layers after mechanical polishing and was able to reduce artifacts significantly. The microstructure of a cross-section of a thin copper film was evaluated by attachment of a dummy to the film for mechanical polishing.