• 한국재료학회지
• /
• 제11권9호
• /
• pp.759-762
• /
• 2001

Mg$_2$SnO$_4$having an inverse spinel structure was selected as a new host material of $Mn^{2+}$ activator. The luminescence of the $Mg_2$SnO$_4$:Mn phosphor prepared by the solid-state reaction were investigated under ultraviolet and low-voltage electron excitation. The Mn-doped magnesium tin oxide exhibited strong green emission with the spectrum centered at 500nm wavelength. It was explained that the green emission in $Mg_2$SnO$_4$:Mn phosphor is due to energy transfer from $^4T_1to ^6A_1\;of\; Mn^{2+}$ ion at tetrahedral site in the spinel structure. The optimum concentration of $Mn^{2+}$/ion exhibiting maximum emission intensity by the low-voltage electron excitation was 0.6mol%. ？

• Transactions on Electrical and Electronic Materials
• /
• 제12권1호
• /
• pp.11-15
• /
• 2011

In this study, $ZnGa_2O_4$ phosphors in its application to field emission displays and electroluminescence were synthesized through the precipitation method and $Mn^{2+}$ ions. A green luminescence activator, $Cr^{3+}$ ions, and a red luminescence activator were separately doped into $ZnGa_2O_4$, which was then screen printed to an indium tin oxide substrate. The thick films of the $ZnGa_2O_4$ were deposited with the various thicknesses using nano-sized powder. The best luminescence characteristics were shown at a thickness of 60 ${\mu}m$. Additionally, green-emission $ZnGa_2O_4:Mn^{2+}$ and red-emission $ZnGa_2O_4:Cr^{3+}$ phosphor thick films, which have superior characteristics, were manufactured through the screen-printing method. These results indicate that $ZnGa_2O_4$ phosphors prepared through the precipitation method have wide application as phosphor of the full color emission.

• 자원리싸이클링
• /
• 제29권3호
• /
• pp.61-74
• /
• 2020

본 연구에서는 폐형광등 처리 공정의 경제성 확보를 위하여 수행되었으며, 폐형광등 유리의 글래스비드용 원료로서의 사용 가능성, 폐형광체 분말로부터 희토류의 침출, 희토류 침출액으로부터 희토류의 용매추출 가능성 등을 검토하였다. 폐형광체는 산화이트륨 28.9%, 산화세륨이 3.46%, 산화유로퓸 1.95%, 산화터븀 1.76%, 산화란탄 1.43% 순으로 함유되어 있어 회수 및 정제 시 경제성이 충분할 것으로 판단되었다. 폐형광등 유리를 사용하여 글래스비드를 시험 생산 한 결과 그 생산수율과 품질이 우수하여 폐형광등 유리를 글래스비드용 원료로 사용할 수 있을 것으로 판단되었다. 소다배소한 폐형광체를 수침출하면 알루미늄과 규소성분 및 잔류 탄산나트륨 등이 용해하며, 이 수용액에 탄산가스를 불어 넣어 pH를 7 정도로 떨어뜨리면 NaAl₂(CO₃)(OH)₂와 SiO₂ 등이 침전하였다. 자이렌을 희석제로 사용하는 cyanex272-hydrochloric acid, cyanex272-sulfuric acid, D2EHPA-hydrochloric acid, D2EHPA-sulfuric acid, lonquest290-hydrochloric acid, lonquest290-sulfuric acid, p507-hydrochloric acid 조합의 용매추출에서 Y, Eu, Ce, La, Tb의 추출률이 100%에 가깝다. 그러나 동일 조건에서의 원소별 추출률의 차이, 즉 선택성은 16% 이하이다.

• 한국재료학회지
• /
• 제16권4호
• /
• pp.248-252
• /
• 2006

An investigation is reported on the coating of ZnS:Cu,Cl phosphors by $HfO_2$ using atomic layer deposition method. Hafnium oxide films were prepared at the chamber temperature of $280^{\circ}C$ using $Hf[N(CH_3)_2]_4\;and\;O_2$ as precursors and reactant gas, respectively. XPS and ICP-MS analysis showed the surface composition of coated phosphor powder was hafnium oxide. In FE-SEM analysis, the surface morphology of uncoated phosphors became smoother and clearer as the number of ALD cycle increased from 900 to 1800. The photoluminescence intensity for coated phosphors showed $7.3{\sim}13.4%$ higher than that of uncoated. The effect means that the reactive surface is uniformly coated with stable hafnium oxide to reduce the dead surface layer without change of bulk properties and also its absorptance is almost negligible due to ultrathin(nano-scaled) films. The growth rate is about $1.1{\AA}/cycle$.

• 한국방사선학회논문지
• /
• 제4권4호
• /
• pp.25-28
• /
• 2010

본 연구에서는 고해상도 영상획득을 위해 저온액상법을 이용하여 Europium doped gadollium oxide($Gd_2O_3$:Eu) 미세 형광체를 제조하여 입자의 형상 및 구조를 분석하였으며, 발광체 필름에 대한 방사선에 대한 광학적 반응특성 실험을 통해 고해상도 영상검출기 적용 가능성을 확인하였다. 제조된 형광체 필름 두께에 따른 광량 및 선량에 따른 발광의 선형성을 조사하였다. 측정결과, $270{\mu}m$ 두께의 $Gd_2O_3$:Eu에서 $2945pC/cm^2/mR$의 발광 강도로 이 값은 벌크 형광체 필름의 발광 강도보다 약 1.2배 높은 영상 획득을 위한 충분한 신호임을 확인할 수 있었다. 또한, 임상 진단 영역의 X선 조사선량 범위에서 대체로 좋은 선형적 특성을 보였다.

• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.150-156
• /
• 2009

플라즈마 디스플레이 패널(Plasma Display Panel; PDP)이 Liquid Crystal Display(LCD) 등 다른 대형 평면 디스플레이 분야와 경쟁하기 위해선 제품의 다양성과 발광 효율의 향상, 저가격화, 고화질화 등의 기술 발전이 요구된다. 본 논문에서는 우선 기존 PDP용 녹색 형광체의 특성과 문제점, 이를 해결하기 위한 방법에 대해 개괄적으로 논의한다. 또한, 제품의 다양성을 위해 개발 진행 중인 3D-PDP의 원리와 이의 실현을 위한 형광체의 요구 특성에 대해 기술한다. 대표적인 PDP용 녹색 형광체인 $Zn_2SiO_4:Mn$ 형광체가 가진 문제점은 표면의 높은 음전하와 상대적으로 긴 잔광 시간으로 요약된다. 표면의 높은 음전하와 플라즈마의 가혹한 환경에 노출로 인한 열화 현상은 금속 산화물의 코팅을 통해 해결할 수 있음을 알 수 있었으며, 특히 $Al_2O_3$가 코팅되었을 때 가장 큰 효과를 볼 수 있음을 알 수 있었다. 상대적으로 긴 잔광 시간은 Mn 농도를 늘린 $Zn_2SiO_4:Mn$ 형광체를 사용함으로 개선할 수 있고, 부족한 휘도는 $YBO_3:Tb$ 형광체를 혼합하여 사용함으로써 개선할 수 있었다. 아울러 본 연구에서는 $YBO_3:Tb$ 형광체 대신으로 115%의 휘도를 가지는 $(Y,\;Gd)Al_3(BO_3)_4:Tb$ 형광체의 사용이 가능함을 제안하였으며, 3D-PDP에 적용하기에 적합한 1 ms 내외의 잔광 시간을 가지는 $(Mg,\;Zn)Al_2O_4:Mn$ 형광체를 제안하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.715-718
• /
• 2004

Substantially improved methods for the preparation of europium-doped yttrium oxide red phosphor with the inclusion of alkali metal halides having a general formula $(Y_{1-x}Eu_x)_2O_3$:MX where 0.025${\leq}$x${\leq}$0.2 and MX is alkali halide in the mole ratio 0.025 to 0.6, more preferably between 0.05 to 0.2 mole, are reported. Another series of the red phosphor materials with general formula $(Y_{1-x-y}Gd_xEu_y)_2O_3$:MX where 0.05${\leq}$x${\leq}$0.40 and 0.025${\leq}$y${\leq}$0.20 and MX is alkali halide in the mole ratio 0.025 to 0.5, more preferably between 0.1 to 0.2 mole, has also been presented. The inclusion of alkali halide greatly increase the luminance of the materials. The materials are very soft with fine particle size less than 100nm. The phosphorescent materials have good luminance in VUV region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.155-159
• /
• 2003

The preparation and luminescence characterization of yttrium oxide doped with trivalent europium phosphors by sol-gel method have been investigated. Aqueous metal nitrate solution was mixed with EDTA which was chosen by the most suitable material of sol-gel formation one of appled various chelating agents. we noticed that the samples when are heated with EDTA at a temperature of $100^{\circ}C$ for 1hrs, produced brownish and crisp powders due to condensation reaction on decomposition, dehydration and formation of sol-gel. Hence, when the powder pre-heated was then heated at $1200^{\circ}C$ for 3hrs in atmosphere, the luminescence characterization of resultant $Y_{2}O_{3}:Eu^{3+}$ phosphor was enhanced upto maximum 30% significantly than conventional method through increasing porous region and decreasing particle sizes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.151-154
• /
• 2003

The synthesis and luminescent properties of trivalent europium activated gadolinium oxide red phosphors by sol-gel process have been investigated. Aqueous metal nitrate solution was mixed with EDTA which was chosen by the most suitable material of sol-gel formation as chelating agents. We noticed that the samples when are heated with EDTA at a temperature of $100^{\circ}C$ for lhrs, produced brownish and crisp powders due to condensation reaction on decomposition, dehydration and formation of sol-gel. Hence, when the powder pre-heated at about $100^{\circ}C$ was then heated at $1200^{\circ}C$ for 3hrs in atmosphere, the luminescence properties of resultant $Gd_{2}O_{3}:Eu^{3+}$ phosphor was measured by SEM, FT-IT and brightness intensity was shown 20% higher than those prepared by conventional method and by other chelating agent.