• 제목/요약/키워드: Oxide nanoparticle

검색결과 244건 처리시간 0.033초

나노유체의 풀비등 임계열유속에 대한 실험적 연구 (Experimental Investigations on Pool Boiling CHE of Nano-Fluids)

  • 김형대;김무환
    • 대한기계학회논문집B
    • /
    • 제31권11호
    • /
    • pp.949-956
    • /
    • 2007
  • Pool boiling critical heat flux (CHF) of nanofluids with oxide nanoparticles of $TiO_2$ or $Al_2O_3$ was experimentally investigated under atmospheric pressure. The results showed that a dispersion of oxide nanoparticles significantly enhances the CHF over that of pure water. Moreover it was found that nanoparticles were seriously deposited on the heater surface during pool boiling of nanofluids. CHF of pure water on a nanoparticle-deposited surface, which is produced during the boiling of nanofluids, was not less than that of nanofluids. The result reveals that the CHF enhancement of nanofluids is absolutely attributed to modification of the heater surface by the nanoparticle deposition. Then, the nanoparticle-deposited surface was characterized with parameters closely related to pool boiling CHF, such as surface roughness, contact angle, and capillary wicking. Finally, reason of the CHF enhancement of nanofluids is discussed based on the changes of the parameters.

Electrochemical Characteristics of Indium Tin Oxide Nanoparticles prepared by Sol-gel Combustion Hybrid Method

  • Chaoumead, Accarat;Choi, Woo-Jin;Lee, Dong-Hoon;Sung, Youl-Moon
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권3호
    • /
    • pp.414-417
    • /
    • 2011
  • Indium tin oxide (In:$SnO_2$) nanoparticles were synthesized employing a sol-gel combustion method followed by annealing. The TG, XRD, XPS and SEM results of the precursor powders and calcinated In:$SnO_2$ nanoparticles were investigated. Crystal structures were examined by powder XRD, and those results show shaper intensity peak at $25.6^{\circ}$ ($2{\theta}$) of $SnO_2$ by increased annealing temperature. A particle morphology and size was examined by SEM, and the size of the nanoparticles was found to be in the range of 20~30nm. In:$SnO_2$ films could controlled by nanoparticle material at various annealing temperature. The sol-gel combustion method was offered simple and effective route for the synthesis of In:$SnO_2$ nanoparticles.

Influence an Oxide Layer Thickness on Resistivity of Cu Conductive Film and Ink-jet Printing of Cu Nanoparticle Ink

  • Jeong, Sun-Ho;Woo, Kyoo-Hee;Kim, Dong-Jo;Lim, Soon-Kwon;Kim, Jang-Sub;Moon, Joo-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.724-726
    • /
    • 2007
  • We have developed the synthesis method to reduce the surface oxide layer in Cu nanoparticle, which is based on controlling the molecular weight of capping polymer. In addition, we demonstrated how the variation of oxide layer thickness influences the resistivity of conductive Cu film.

  • PDF

올레핀/파라핀 분리용 AgNO3 전구체를 활용한 poly(ethylene oxide)/Ag nanoparticles/p-benzoquinone 복합체 분리막 제조 (Fabrication of Poly(ethylene oxide)/Ag Nanoparticles/p-benzoquinone Composite Membrane Using AgNO3 Precursor for Olefin/Paraffin Separation)

  • 김민수;강상욱
    • 멤브레인
    • /
    • 제28권4호
    • /
    • pp.260-264
    • /
    • 2018
  • 올레핀/파라핀 분리를 위해 poly(ethylene oxide)(PEO)/Ag nanoparticles (AgNPs)(전구체: $AgBF_4$)/p-benzoquinone (p-BQ) 복합막이 제조되었으며, 이 복합체 분리막의 성능은 100시간까지 선택도 10과 투과도 15 GPU로 유지되는 것이 관찰되었다. 분리막의 성능이 100시간까지 유지할 수 있었던 이유는 p-BQ의 첨가로 인해 Ag ion이 안정적으로 Ag nanoparticles로 형성될 수 있었을 뿐더러 전자수용체인 p-BQ으로 인해 표면이 부분 양극성화 되어 올레핀 운반체로서 역할을 성공적으로 수행한 결과라 생각되었다. 본 연구에서는 Ag nanoparticles의 전구체로 사용된 $AgBF_4$의 가격이 고가이기 때문에 가격 측면에서 유리한 $AgNO_3$ Ag nanoparticles의 전구체로 사용하여 실험을 진행하였다. 그 결과로서 $AgNO_3$의 경우에는 앞선 $AgBF_4$과는 다르게 안정적으로 은 나노입자가 형성되지 못하고 이로 인하여 좋은 성능을 내지 못하는 것으로 분석되었다.

Use of Gold Nanoparticle Fertilizer Enhances the Ginsenoside Contents and Anti-Inflammatory Effects of Red Ginseng

  • Kang, Hee;Hwang, Yun-Gu;Lee, Taek-Guen;Jin, Cheng-Ri;Cho, Chi Heung;Jeong, Hee-Yeong;Kim, Dae-Ok
    • Journal of Microbiology and Biotechnology
    • /
    • 제26권10호
    • /
    • pp.1668-1674
    • /
    • 2016
  • Red ginseng, a steamed and sun-dried ginseng, is a popular health-promoting food in Korea and other Asian countries. We introduced nanofertilizer technology using gold nanoparticles in an effort to develop red ginseng with an elevated level of ginsenosides, the main active compounds of ginseng. Shoots of 6-year-old ginseng plants were fertilized three times with colloidal gold nanoparticle sprays. Red ginseng extract was prepared from the main roots. The concentrations of gold and ginsenosides were measured following gold nanoparticle treatment. To evaluate the anti-inflammatory effects, mouse peritoneal macrophages of male BALB/c mouse were stimulated with lipopolysaccharide plus interferon-γ in the presence of extracts from red ginseng with or without gold nanoparticle treatment. The content of ginsenosides, such as Rg1, Re, Rf, and Rb1, increased in ginseng treated with gold nanofertilizer whereas the steaming process increased only the levels of Rd and Rg3. The levels of nitric oxide, inducible nitric oxide synthase, and interleukin-6, but not tumor necrosis factor-α, were more suppressed in macrophages treated with extract from gold nanoparticle-treated red ginseng. Our results show that the use of a colloidal gold nanoparticle fertilizer improved the synthesis of ginsenosides in ginseng and enhanced the anti-inflammatory effects of red ginseng. Further research is required to elucidate the causal factors for the gold-induced change in ginsenoside synthesis and to determine the in vivo effect of gold nanoparticle-treated ginseng.

Molecular interactions between pre-formed metal nanoparticles and graphene families

  • Low, Serena;Shon, Young-Seok
    • Advances in nano research
    • /
    • 제6권4호
    • /
    • pp.357-375
    • /
    • 2018
  • Two dimensional (2D) atomic layered nanomaterials exhibit some of the most striking phenomena in modern materials research and hold promise for a wide range of applications including energy and biomedical technologies. Graphene has received much attention for having extremely high surface area to mass ratio and excellent electric conductivity. Graphene has also been shown to maximize the activity of surface-assembled metal nanoparticle catalysts due to its unique characteristics of enhancing mass transport of reactants to catalysts. This paper specifically investigates the strategy of pre-formed nanoparticle self-assembly used for the formation of various metal nanoparticles supported on graphene families such as graphene, graphene oxide, and reduced graphene oxide and aims at understanding the interactions between ligand-capped metal nanoparticles and 2D nanomaterials. By varying the functional groups on the ligands between alkyl, aromatic, amine, and alcohol groups, different interactions such as van der Waals, ${\pi}-{\pi}$ stacking, dipole-dipole, and hydrogen bonding are formed as the 2D hybrids produced.

양성자 빔 암치료효과 개선을 위한 산화철 및 산화가돌리늄 나노입자 기반의 방사선증감제 합성 (A Synthesis of Iron Oxide Based and Gadolinium Oxide Based Radiosensitizer for the Therapeutic Enhancement of Proton Beam Cancer)

  • 강보선
    • 한국방사선학회논문지
    • /
    • 제8권6호
    • /
    • pp.325-332
    • /
    • 2014
  • 금속나노입자는 진단이나 치료를 포함한 의생명응용분야에 있어 매력적인 특징들을 갖고 있다. 양성자 빔 치료를 위한 방사선증감제로 사용하기 위해 가교덱스트란이 코팅된 산화철나노입자(SPIONs)와 실리카가 코팅된 산화가돌리늄나노입자(SPGONs)를 합성하였다. 덱스트란과 실리카는 각각 SPIONs와 SPGONs의 보호수단이다. 합성된 SPIONs와 SPGONs를 투과전자현미경(TEM)으로 분석한 결과 각각 평균 직경이 3~5 nm와 30~100 nm였다. 합성된 방사선 증감제의 효과를 평가하기 위해 세포생존곡선 측정과 Western blotting을 수행하였다. 측정된 세포생존곡선으로부터 계산된 90% 세포사멸 시 방사선증감비는 SPIONs와 SPGONs에 대하여 각각 1.23과 1.03이었다. Western blotting 결과 역시 Cytochrome C의 발현량이 SPIONs를 처리한 암세포에서 유의적으로 증가됨을 보였다.

Enhancement of Efficiency for Polymerase Chain Reaction Using Nanoparticle-Coated Graphene Oxide

  • 주민영;백승훈;김은주;;박찬영;박태정
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.375.1-375.1
    • /
    • 2016
  • Polymerase chain reaction (PCR) has revolutionized genetics and become one of the most popular techniques in modern biological and medical sciences. It can be used not only as an in vitro DNA amplification method but also used in many bioassay applications. The PCR can be used to exponentially produce a large number of DNA copies from a small quantity of DNA molecules in a few hours. However, as unwanted DNA fragments are also often manufactured, the amplification efficiency of PCR is decreased. To overcome this limitation, several nanomaterials have been employed to increase the specificity of the PCR reaction. Recently, graphene has attracted a great interest for its excellent electron transfer, thermal and biocompatibility. Especially, gold nanoparticle-coated graphene oxide (GO/AuNPs) led to enhance electron and thermal transfer rate and low-charge transfer resistance. Therefore, we report the development of a demonstration for the PCR efficiency using a large-scale production of the GO and combination of gold nanoparticles. Because a thermal conductivity is an important factor for improving the PCR efficiency in different DNA polymerases and different size samples. When PCR use GO/AuNPs, the result of transmission electron microscopy and real-time quantitative PCR (qPCR) showed an enhanced PCR efficiency. We have demonstrated that GO/AuNPs would be simply outperformed for enhancing the specificity and efficiency of DNA amplification procedure.

  • PDF

Synthesis and Characterization of Mn3O4-Graphene Nanocomposite thin Film by an ex situ Approach

  • Kang, Myunggoo;Kim, Jung Hun;Yang, Woochul;Jung, Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권4호
    • /
    • pp.1067-1072
    • /
    • 2014
  • In this study, we report a new approach for $Mn_3O_4$-graphene nanocomposite by ex situ method. This nanocomposite shows two-dimensional aggregation of nanoparticle, and doping effect by decorated manganese oxide ($Mn_3O_4$), as well. The graphene film was made through micromechanical cleavage of graphite on the $SiO_2/Si$ wafer. Manganese oxide ($Mn_3O_4$) nanoparticle with uniform cubic shape and size (about $5.47{\pm}0.61$ nm sized) was synthesized through the thermal decomposition of manganese(II) acetate, in the presence of oleic acid and oleylamine. The nanocomposite was obtained by self-assembly of nanoparticles on graphene film, using hydrophobic interaction. After heat treatment, the decorated nanoparticles have island structure, with one-layer thickness by two-dimensional aggregations of particles, to minimize the surface potential of each particle. The doping effect of $Mn_3O_4$ nanoparticle was investigated with Raman spectra. Given the upshift in positions of G and 2D in raman peaks, we suggest that $Mn_3O_4$ nanoparticles induce p-doping of graphene film.