• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.6-6
• /
• 2009

We present an alternative process whereby deuterium is delivered to the location where the gate oxide reside by an implantation process. Deuterium ions were implanted using different energies to account for the topography of the overlaying layers and placing the D peak at the top of gate oxide. A short anneal at forming gas was performed to remove the D-implantation damage. We have observed that deuterium ion implantation into the gate oxide region can successfully remove the interface states and the bulk defects.

• 전기화학회지
• /
• 제6권2호
• /
• pp.158-160
• /
• 2003

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400 F/g (specific capacitance) and good cycleability. But, it had serious demerits of low voltage range under 0.5 V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. We report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over 250 F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around 100 F/g capacitance. This capacitance was only electric double layer capacitance of active surface area. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Itis very hard to reach resistive layer. So, we have studied on pretreatment of electrode to contain working ions easily. We'll report more details.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.7-12
• /
• 2014

The effect of various synthesis conditions in the fabrication of graphene using the exfoliation methods has been investigated. Graphite oxide and graphene fabricated by various synthesis conditions were identified by SEM and XRD. Graphite oxide was made from graphite by the chemical oxidation, and graphene was manufactured from graphite oxide by thermal exfoliation method. As a result, it is confirmed that graphite oxide was well formed from graphite, and the graphene could be obtained from graphite oxide. And it was found that the interlayer spacing between the graphene layers depended on the reaction time and particle size, regardless of the reaction temperature from $5^{\circ}C$ to $25^{\circ}C$.

• 한국표면공학회지
• /
• 제33권4호
• /
• pp.217-221
• /
• 2000

The gate oxide thickness is becoming thinner and thinner in order to speed up the semiconductor CMOS devices. We have investigated very thin$ SiO_2$ gate oxide layers and found anomaly between the thickness determined with capacitance measurement and these obtained with cross-sectional high resolution transmission electron microscopy. The thicknesses difference of the two becomes important for the thickness of the oxide below 5nm. We propose that the variation of dielectric constant in thin oxide films cause the anomaly. We modeled the behavior as (equation omitted) and determined $\varepsilon_{bulk}$=3.9 and $\varepsilon_{int}$=-4.0. We predict that optimum $SiO_2$ gate oxide thickness may be $20\AA$ due to negative contribution of the interface dielectric constant. These new results have very important implication for designing the CMOS devices.s.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.79-82
• /
• 1998

Film characteristics of thin ONO dielectric layers for MONOS(metal-oxide-nitride-oxide-semiconductor) EEPRM was investigated by AES and AFM. Second derivative spectra of AES Si LVV overlapping peak provided useful information for chemical state analysis of superthin film. The ONO films with dimension of tunneling oxide 24${\AA}$, nitride 33${\AA}$, and blocking oxide 40${\AA}$ were fabricated. During deposition of the LPCVD nitride films on tunneling oxide, this thin oxide was nitrized. When the blocking oxide were deposited on the nitride film, the oxygen not only oxidized the nitride surface, but diffused through the nitride. The results of ONO film analysis exhibits that it is made up of SiO$_2$(blocking oxide)/O-rich SiON(interface/N-rich SiON(nitride)/-rich SiON(interface)/N-rich SiON(nitride)/O-rich SiON(tunneling oxide).

• 한국정보통신학회논문지
• /
• 제6권1호
• /
• pp.99-102
• /
• 2002

다결정 실리콘층 아래의, 게이트 산화막이라고 불리는 높은 온도에서 형성된 산화막에서 핀홀이 관찰되었으며 그 메카니즘이 분석되었다. 다결정 실리콘층 아래의 산화막은 다른 다결정 실리콘층의 플라즈마 에칭 과정 동안에 파괴되어진다. 두 개의 다결정 실리콘층은 CVD증착에 의해 만들어진 0.8$\mu\textrm{m}$의 두꺼운 산화막에 의해 분리되어 있다. 파괴된 산화막들이 아크가 발생한 부분을 중심으로 흩어져 있으며 아크가 발생한 부분에서 생성된 극도로 강한 전계가 게이트 산화막을 파괴 시켰다고 가정된다. 아크가 발생한 부분은 Alignment key에서 관찰되었고 그리고 이것이 발견된 웨이퍼는 낮은 수율을 보여주었다. 아크가 발생한 부분이 칩의 내부가 아니더라도 게이트 산화막의 파괴에 의해 칩이 정상적으로 동작하지 않았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.207.2-207.2
• /
• 2013

Oxide-based thin film transistors have been attempted as powerful candidates for driving circuits for active-matrix organic light-emitting diodes and transparent electronics. The oxide TFTs are based on the amorphous multi-component oxides involving zinc, indium, and/or tin elements as main cation sources. The current work employed RF sputtering in order to deposit zinc-tin oxide thin films applicable to transparent oxide thin film transistors. The deposited thin film was characterized and probed in terms of materials and devices. The physical/chemical characterizations were performed using X-ray diffraction, Atomic Force Microscopy, Spectroscopic Ellipsometry, and X-ray Photoelectron Spectroscopy. The thin film transistors were fabricated using a bottom-gated structure where thermally-grown silicon oxide layers were applied as gate-dielectric materials. The inherent properties of oxide thin films are combined with the corresponding device performances with the aim to fabricating the multi-component oxide thin films being optimized towards transparent electronics.

• 한국자기학회지
• /
• 제14권1호
• /
• pp.13-17
• /
• 2004

알루미늄 산화물 절연막에 하프늄의 첨가가 미치는 영향에 관해서 연구하였다. 하프늄을 첨가할 경우 자기저항이 증가하고 자기저항의 온도의존도와 바이어스 전압의존도가 감소함을 관찰하였다. 이는 하프늄의 첨가가 알루미늄 산화물의 결함의 감소를 유발하기 때문이라 판단된다. 하프늄의 첨가된 알루미늄 산화물의 미세구조를 분석한 결과 하프늄이 알루미늄과 혼합됨이 관찰 되었다. 알루미늄과 하프늄의 혼합 금속을 절연막 형성을 위한 금속으로 사용한 결과 하프늄의 첨가된 알루미늄과 동일한 결과를 얻었다. 이로부터 하프늄이 알루미늄과 혼합하면서 절연막 내의 결함을 감소시키고 그에 따른 자기저항의 증가와 자기저항의 온도의존도와 바이어스 전압의존도를 감소시키는 결과를 가져온 것으로 판단된다.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.196-201
• /
• 2014

In this study, nanocrystalline Cu-Ni bulk materials with various compositions were cold compacted by a shock compaction method using a single-stage gas gun system. Since the oxide layers on powder surface disturbs bonding between powder particles during the shock compaction process, each nanopowder was hydrogen-reduced to remove the oxide layers. X-ray peak analysis shows that hydrogen reduction successfully removed the oxide layers from the nano powders. For the shock compaction process, mixed powder samples with various compositions were prepared using a roller mixer. After the shock compaction process, the density of specimens increased up to 95% of the relative density. Longitudinal cross-sections of the shock compacted specimen demonstrates that a boundary between two powders are clearly distinguished and agglomerated powder particles remained in the compacted bulk. Internal crack tended to decrease with an increase in volumetric ratio of nano Cu powders in compacted bulk, showing that nano Cu powders has a higher coherency than nano Ni powders. On the other hand, hardness results are dominated by volume fraction of the nano Ni powder. The crystalline size of the shock compacted bulk materials was greatly reduced from the initial powder crystalline size since the shock wave severely deformed the powders.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.807-812
• /
• 2016

Transparent film heaters (TFHs) based on Joule heating are currently an active research area. However, TFHs based on an indium tin oxide (ITO) monolayer have a number of problems. For example, heating is concentrated in only part of the device. Also, heating efficiency is low because it has high sheet resistance ($R_s$). To address these problems, this study introduced hybrid layers of ITO/Ag/ITO deposited by magnetron sputtering, and the electrical, optical, and thermal properties were estimated for various thicknesses of the metal interlayer. The $R_s$ of ITO(40)/Ag/ITO(40 nm) hybrid TFHs were 5.33, 3.29 and $2.15{\Omega}/{\Box}$ for Ag thicknesses of 10, 15, and 20 nm, respectively, while the $R_s$ of an ITO monolayer (95 nm) was $59.58{\Omega}/{\Box}$. The maximum temperatures of these hybrid TFHs were 92, 131, and $145^{\circ}C$, respectively, under a voltage of 3 V. And that of the ITO monolayer was only $32^{\circ}C$. For the same total thickness of 95 nm, the heat generation rate (HGR) of the hybrid produced a temperature approximately $100^{\circ}C$ higher than the ITO monolayer. It was confirmed that the film with the lowest $R_s$ of the samples had the highest HGR for the same applied voltage. Overall, hybrid layers of ITO/Ag/ITO showed excellent performance for HGR, uniformity of heat distribution, and thermal response time.