• Korean Journal of Materials Research
• /
• v.18 no.10
• /
• pp.529-534
• /
• 2008

The hydrogen gas sensing properties of a zinc oxide nanowire structure were studied. Porous zinc oxide nanowire structures were fabricated by oxidizing zinc deposited on a single-wall carbon nanotube (SWNT) template. This revealed a porous ZnO-SWNT composite due to the porosity in the SWNT film. The gas sensing properties were compared with those of zinc oxide thin films deposited on SiO2/Si substrates in sensitivity and operating temperature. The composite structure showed higher sensitivity and lower operating temperature than the zinc oxide film. It showed a response even at room temperature while the film structure did not.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.113-113
• /
• 2011

Cobalt oxide 박막은 gas sensor, electro-chromic 소자 그리고 energy storage 소자등 광범위한 분야에서 연구되고 있으며 sputtering, CVD 그리고 electrochemical deposition 를 포함한 다양한 방법으로 증착할 수 있다. 최근에는 원자층 증착 방법을 이용한 cobalt oxide박막 증착이 연구되었는데, cyclopentadienyl계열의 전구체와 ${\beta}$-diketonate계열의 전구체를 이용하였다. 하지만 전구체의 낮은 증기압으로 인해 낮은 growth rate (약 0.02~0.05 nm/cycle)을 보였다. 본 연구에서는 증기압이 높은 전구체인 CCTBA (dicobalt hexacarbonyl tert-butylacetylene) 를 선정하여 원자층 증착 공정의 growth rate를 향상시키고자 하였다. 반응기체로는 O3을 사용하여 cobalt oxide 박막을 증착하였다. 반응기체의 주입시간 및 공정온도를 달리하여 시편을 증착한 결과 $80^{\circ}C$에서 0.1 nm/cycle로 기존의 보고된 growth rate보다 높은 수치를 얻을 수 있었다. 또한 증착된 cobalt oxide 박막내 조성분석과 I-V 측정 등을 이용하여 물리적, 전기적 특성을 규명하였다

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.353-358
• /
• 2016

In this paper, we have studied about the optimum fabrication condition of the printed Indium Tin Oxide (ITO) layers for the electrical resistance-type sensor application. We have investigated on the substrates surface treatments, mixing ratio of organic binder/ITO powder, and viscosity of the printing paste to determine the optimum condition of the screen printed ITO layer. Also, we found that the printing condition is closely related with the sensor performance. To know the feasibility of printed ITO layer as an electrical resistance-type sensor, we have fabricated the ITO sensors with a printed and sputtered ITO layers. The printed ITO films revealed $10^2$ times higher sensitivity than the sputtered ITO layer. Also, the sputtered ITO layer exhibited an operating temperature of $127^{\circ}C$ at the operating voltage of 5 V. While, in case of the printed ITO layer showed the operating temperature of $27.6^{\circ}C$ in high operating voltage of 30 V. We found that the printed ITO layer is suitable for the various sensor applications.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.249-255
• /
• 2013

Gas-sensor array technology, which has been much utilized in the field of food technology by the name of 'electronic nose' is drawing attention in diagnosing lung cancer based on the analysis of the exhaled human breath. Much understanding has been accomplished about the composition of the volatile organic compounds (VOCs) of the human exhaled breath, in spite of some variations depending on research groups due mainly to lack of the standardization of the sensing procedures. Since VOCs may be produced during the process of cellular metabolism, difference in the cellular metabolism between healthy cells and lung cancer cells are expected to be reflected on the composition variation of the exhaled VOCs. Several studies have attempted to apply the gas-sensor array technology to lung cancer analysis using many different types of sensors including metal oxide, carbon black-polymer composite, surface acoustic wave, and gold nanoparticles. In this mini-review VOC as biomarkers, sensor array technology and application of the array technology for the diagnosis of cancer disease have been described.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.667-671
• /
• 2013

We present an easy method of preparing two-dimensional (2D) periodic hollow tin oxide ($SnO_2$) hemisphere array gas sensors using polystyrene (PS) spheres as a template. The structures were fabricated by the sputter deposition of thin tin (Sn) metal over an array of PS spheres on a planar substrate followed by calcination at an elevated temperature to oxidize Sn to $SnO_2$ while removing the PS template cores. The $SnO_2$ hemisphere array structures were examined by scanning electron microscopy and X-ray diffraction. The structures were calcined at various temperatures and their sensing properties were examined with varying operation temperatures and concentrations of nitric oxide (NO) gas. Their gas-sensing properties were investigated by measuring the electrical resistances in air and the target gases. The measurements were conducted at different NO concentrations and substrate temperatures. A minimum detection limit of 30 ppb, showing a sensitivity of S = 1.6, was observed for NO gas at an operation temperature of $150^{\circ}C$ for a sample having an Sn metal layer thickness corresponding to 30 sec sputtering time and calcined at $600^{\circ}C$ for 2 hr in air. We proved that high porosity in a hollow $SnO_2$ hemisphere structure allows easy diffusion of the target gas molecules. The results confirm that a 2D hollow $SnO_2$ hemisphere array structure of micronmeter sizes can be a good structural morphology for high sensitivity gas sensors.

• Korean journal of food and cookery science
• /
• v.14 no.5
• /
• pp.547-552
• /
• 1998

Essential oils in leaf of fresh Aster glehni were extracted by SDE (simultaneous steam distillation and extraction) method using diethyl ether as solvent. The yield of the essential oils was 0.05%. And their volatile flavor components were analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) and identified by the RI of GC and mass spectrum of GC-MS. A total of 31 components, including 17 hydrocarbons, 2 aldehydes, 7 alcohols, 3 esters, 1 acid and 1 oxide were identified. The major volatile flavor components of fresh Aster glehni were ${\alpha}$-pinene, limonene, $\delta$-elemene, ${\beta}$-pinene, cis-3-hexenol and myrcene. Volatile flavor patterns of fresh ind dried Aster glehni were analyzed using an electronic nose. Sensor PA2 that was sensitive to alcohols showed the highest resistance for fresh and dried Aster glehni. Resistance of six metal oxide sensors was decreased in fresh sample compared with dried one.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.803-808
• /
• 2016

In this work, one dimension $In_2O_3$ nanostructures as detecting materials for indoor toxic gases were synthesized by an electrospinning process. The morphology of electrospun $In_2O_3$ nanofibers was controlled by electrolyte composition, applied voltage and working distance between a nozzle and a substrate. The synthesized $In_2O_3$ nanofibers-based paste with/without carbon black additives was prepared for the integration on a sensor device. The integration of $In_2O_3$ sensing materials was conducted by a hand-printing of the paste into the interdigit Au electrodes patterned on Si wafer. Gas sensing properties on CO and HCHO gases were characterized at $300^{\circ}C$. The evaluated sensing properties such as sensitivity, response time and recovery time were improved in $In_2O_3$ nanofiber pastes with carbon black, compared to the paste without carbon black.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.4-4
• /
• 2011

Extensive research efforts are directed toward the development of highly sensitive gas sensors using novel nanostructured materials. Among the different strategies for producing sensor devices based on nanosized building blocks, polymeric fiber templating approach which is combined by chemical and physical synthesis routes was attracted much attention. This unique morphology increases the surface area and reduces the interfacial area between film and substrate. Consequently, the surface activity is markedly enhanced while deleterious interfacial effects between film and substrate are significantly reduced. Both effects are highly advantageous for gas sensing applications. In this presentation, facile synthesis of hollow and porous metal oxide nanostructures and their applications in chemical sensors will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.100-100
• /
• 2008

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.185.2-185.2
• /
• 2015

Tin Oxide (SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. In addition, it would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. There have been concentrated on the improvement of optical properties, such as conductivity and transparency, by doping Indium Oxide and Gallium Oxide. Recently, with development of fabrication techniques, high-qulaity SnO2 epitaxial thin films have been studied and received much attention to produce the electronic devices such as sensor and light-emitting diode. In this study, powder sputtering method was employed to deposit epitaxial thin films on sapphire (0001) substrates. A commercial SnO2 powder was sputtered. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using XRD, SEM, AFM, and Raman spectroscopy measurements. The details of physical properties of epitaxial SnO2 thin films will be presented.