• Journal of Animal Science and Technology
• /
• v.63 no.1
• /
• pp.16-24
• /
• 2021

The suppressive effect of monensin as an ionophore-feed additive on enteric methane (CH4) emission and renewable methanogenesis were evaluated. To clarify the suppressive effect of monensin a respiratory trial with head cage was performed using Holstein-Friesian steers. Steers were offered high concentrate diets (80% concentrate and 20% hay) ad libitum with or without monensin, galacto-oligosaccharides (GOS) or L-cysteine. Steers that received monensin containing diet had significantly (p < 0.01) lower enteric CH4 emissions as well as those that received GOS containing diet (p < 0.05) compared to steers fed control diets. Thermophilic digesters at 55℃ that received manure from steers fed on monensin diets had a delay in the initial CH4 production. Monensin is a strong inhibitor of enteric methanogenesis, but has a negative impact on biogas energy production at short retention times. Effects of the activity of coprophagous insects on CH4 and nitrous oxide (N2O) emissions from cattle dung pats were assessed in anaerobic in vitro continuous gas quantification system modified to aerobic quantification device. The CH4 emission from dungs with adults of Caccobius jessoensis Harold (dung beetle) and the larvae of the fly Neomyia cornicina (Fabricius) were compared with that from control dung without insect. The cumulative CH4 emission rate from dung with dung insects decreased at 42.2% in dung beetles and 77.8% in fly larvae compared to that from control dung without insects. However, the cumulative N2O emission rate increased 23.4% in dung beetles even though it reduced 88.6% in fly larvae compared to dung without coprophagous insects. It was suggested that the antibacterial efficacy of ionophores supplemented as a growth promoter still continued even in the digested slurry, consequently, possible environmental contamination with the antibiotics might be active to put the negative impact to land ecosystem involved in greenhouse gas mitigation when the digested slurry was applied to the fields as liquid manure.

• Advanced Industrial SCIence
• /
• v.2 no.1
• /
• pp.8-14
• /
• 2023

This study was performed as a preliminary experiment to develop functional feed additives using by-products generated during the production of black garlic. Therefore antioxidant and immune enhancing activity of black garlic pomace were measured. As a result of measuring the antioxidant activity of black garlic pomace, it was found antioxidant activity. Nitric oxide (NO) assay was performed to test the immune enhancing activity of vegetable samples including black garlic pomace among the samples used in the experiment. As a result of the NO assay experiment, highest concentrations of black garlic pomace, aster glehni, and MIX form produced NO, which Garlic pomace (69.4%), aster glehni (35.9%), and MIX (45.3%), respectively, compared to LPS (100%). In conclusion, it is considered that black garlic pomace contains an anti-inflammatory effect, and if the optimal mixing ratio of black garlic pomace and aster glehni is selected, it will be of sufficient value as a feed additive containing an anti-inflammatory effect.

• ETRI Journal
• /
• v.42 no.4
• /
• pp.480-490
• /
• 2020

More than 42 000 fires occur nationwide and cause over 2500 casualties every year. There is a lack of specialized equipment, and rescue operations are conducted with a minimal number of apparatuses. Through-the-wall radars (TTWRs) can improve the rescue efficiency, particularly under limited visibility due to smoke, walls, and collapsed debris. To overcome detection challenges and maintain a small-form factor, a TTWR system-on-chip (SoC) and its architecture have been proposed. Additive reception based on coherent clocks and reconfigurability can fulfill the TTWR demands. A clock-based single-chip infrared radar transceiver with embedded control logic is implemented using a 130-nm complementary metal oxide semiconductor. Clock signals drive the radar operation. Signal-to-noise ratio enhancements are achieved using the repetitive coherent clock schemes. The hand-held prototype radar that uses the TTWR SoC operates in real time, allowing seamless data capture, processing, and display of the target information. The prototype is tested under various pseudo-disaster conditions. The test standards and methods, developed along with the system, are also presented.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.1-7
• /
• 2017

Aluminum alloys have been widely used in many fields such as electronic, structure, aero-space and vehicle industries due to their outstanding thermal and electrical conductivity as well as low cost. However, they have some difficulties for using in brazing process because of the strong oxide layer of $Al_2O_3$ on the surface of Al alloy. In addition, their melting point is similar to that of brazing filler metal resulting in thermal damage of Al alloys. Therefore, it is very important to understand the brazing principles, filler metal and its properties such as wetting, capillary flow and dissolution of base metal in the Al brazing process. This paper reviews the brazing principles, aluminum alloys, and brazing fillers. In the case of brazing principle, some formula was used for calculation of capillary force and the dissolution to obtain the best condition of Al brazing. In addition, the advanced research trends in Al brazing were introduced including thermal treatment, additive for improving property and decreasing melting point in Al brazing process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.74-77
• /
• 2002

Ferroelectric Random Access Memory(FRAM) and MEMS applications require noble metal or refractory metal oxide electrodes. In this study, Ru thin films were etched using $O_2$+10% $CF_4$ plasma in an inductively coupled plasma(ICP) etching system. The etch rate of Ru thin films was examined as function of rf power, DC bias applied to the substrate. The enhanced etch rate can be obtained not only with increasing rf power and DC bias voltage, but also with small addition $CF_4$ gas. The selectivity of $SiO_2$ over Ru are 1.3. Radical densities of oxygen and fluorine in $CF_4/O_2$ plasma have been investigated by optical emission spectroscopy(OES). The etching profiles of Ru films with an photoresist pattern were measured by a field emission scanning electron microscope (FE-SEM). The additive gas increases the concentration of oxygen radicals, therefore increases the etch rate of the Ru thin films and enhances the etch slope. In $O_2$+10% $CF_4$ plasma, the etch rate of Ru thin films increases up to 10% $CF_4$ but decreases with increasing $CF_4$ mixing ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.714-717
• /
• 2010

The improved flux-lock type superconducting fault current limiter (SFCL) is composed of a series transformer and superconducting unit of the yttrium-barium-copper-oxide (YBCO) coated conductor. In this paper, we investigated current limiting characteristics through winding direction of coil 2 and variable number of coil 1 and coil 2 in improved flux-lock type SFCL. The better fault current characteristics and the burden of YBCO coated conductor can be confirmed from the experimental result in the higher turn ratio of coil 1 and coil 2 in the additive conditions. In case of subtractive condition, we can confirm a similar result in the same case of experimental conditions. but the burden of YBCO coated conductor has been increased from an increase in winding numbers of coil 2.

• CELLMED
• /
• v.6 no.4
• /
• pp.28.1-28.6
• /
• 2016

Oxidative rancidity in foods causes undesirable changes in nutritive value, aroma, flavor, and color. Salix Koreensis Andersson in DC. (SK) has anti-oxidative and anti-inflammatory effects and is traditionally used to treat neuralgia, edema, pain, and inflammatory diseases. However, the regulatory effects of SK on oxidative and inflammatory reactions have not been elucidated. In this context, we scientifically validated the anti-oxidative and anti-inflammatory activities of SK leaf (SKL). The methanol extract of SKL was evaluated for in vitro anti-oxidative activities. SKL showed increased superoxide dismutase (SOD)-like activity and 1, 1-diphenyl-2-picrylhydrazyl radical scavenging activity. The in vitro anti-oxidant and anti-inflammatory activities of SKL were also investigated in lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. LPS resulted in decreased SOD activities compared with the unstimulated cells, but SKL significantly increased SOD activities reduced by LPS. In addition, LPS-induced nitric oxide, tumor necrosis factor-${\alpha}$, and interleukin-6 productions were significantly and dose-dependently reduced by SKL in RAW264.7 macrophages without inducing cytotoxicity. In conclusion, these results indicate that SKL will be able to be effectively used as a food additive with anti-oxidative and anti-inflammatory effects.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.5.2-8
• /
• 1995

0.15($Ba_{1-x}Sr_{x}$)O-$0.15Sm_2O_3$-$0.7TiO_2$(x=0∼9[m/o]ceramics were fabricated by mixed-oxide method. Microwave dielectric properties were investigated with sintering conditions aid Sr addictive. In the specimen with x=0[m/o] sintered at 1350∼1470[$^{\circ}C$], dielectric constant, quality factor and temperature coefficient of resonant frequency were 70∼74, 2800∼3300(at 3[GHz]), -1.33∼+l.66[ppm/$^{\circ}C$, respectively. Increasing the Sr additive from 0 to 5[m/o], dielectric constant and temperature coefficient of resonant frequency were increased and quality factor was decreased. In the specimen with x=r[m/o] sintered at 1375[$^{\circ}C$], 6[hr], dielectric constant, quality factor and temperature coefficient resonant frequency were 75.62, 2785(at 3[GHz]), +8.39[ppm/$^{\circ}C$], respectively.

• Composites Research
• /
• v.25 no.5
• /
• pp.159-163
• /
• 2012

The coating of metal surface with carbon nanotubes(CNTs) has been studied for the heat transfer enhancement of the boiling and condensation of refrigerant. The multiwalled carbon nanotube/copper oxide(CuO) composite powder, which has been surface modified by dispersant and polyvinyl alcohol solution, was ultrasonically sprayed and sintered on a copper wafer. In this paper, experiments were performed to assess the characterization and comparison of the carbon nanotube before and after sinterning and the morphology changes of the CNT/CuO-coated surface by using different dispersants. The dispersants used are THF (Tetrahydrofuran), SDBS(Dodecylbenzenesulfonic acid sodium salt), SDS(Sodium dodecy sulfate). The samples were examined by scanning electron microscopy(SEM), thermogravimetric analysis(TGA), differential scanning calorimeter(DSC) and Raman spectroscopy.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.38-42
• /
• 2015

Polydimethylsiloxane (PDMS) is a widely used material for replicating micro-structures because of its transparency, deformability, and easy fabrication. At the nanoscale, however, it is hard to fill a nanohole template with uncured PDMS. This paper introduces several simple methods by changing the surface energy of a nanohole template and PDMS elastomer for replicating 100nm-scale structures. In the case of template, pristine anodic aluminum oxide (AAO), hydrophobically treated AAO, and hydrophillically treated AAO are used. For the surface energy change of the PDMS elastomer, a hydrophilic additive and dilution solvent are added in the PDMS prepolymer. During the molding process, a simple casting method is used for all combinations of the treated template and modified PDMS. The nanostructured PDMS surface was investigated with a scanning electron microscope after the molding process for verification.