• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.38-41
• /
• 1992

Pb(Zr,Ti)$O_3$ powders were synthesized by the partial oxalate method and the modified partial oxalate method, where the difference between the two is the use of pre-reacted (Zr,Ti)$O_2$ in the former method. When compared with conventional mixed oxide method, calcination temperature can be reduced to less than $700^{\circ}C$ by both partial oxalate methods, and the resulting particle size was finer and more uniform. Using partial oxalate-derived PZT powders, sintering temperatures can also be reduced as low as $950^{\circ}C$ without sacrificing desired dielectric and piezoelectric properties, such as relative permittivity, electromechanical coupling factor, and piezoelectric coefficient. Two partial oxalate methods yield ceramics with almost the same physical and electrical properties, so that the step of producing ZTO powder does not seem to be necessary.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.963-969
• /
• 1992

This paper describes the feasibility for a direct production of zinc oxalate powders from zinc-loaded D2EHPA solutions combining the purification and the precipitation in one operation unit. This process has the potential as an alternative to conventional method for the synthesis of zinc oxide precursor particles from the hydrometal-lurgical processes. Zinc was extracted into D2EHPA in kerosene and then zinc-loaded D2EHPA solution was emulsified with oxalic acid-HCl solution to precipitate zinc oxalate powder, which was readily calcined to zinc oxide. The precipitation kinetics and yield were sensitive to experimental conditions. The morphology, size and size distribution of the zinc oxalate powders varied with zinc/oxalate ion riatio, temperature, and the presence of SPAN 60, which affected nucleation, growth, and the emulsion characteristics.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.177-182
• /
• 2010

To synthesize $Gd_2O_3:Eu^{3+}$ phosphor, gadolinium-europium oxalate precursors were prepared from oxalic acid, NaOH or aqueous ammonia via coprecipitation method. The obtained precursors were heat-treated and then characterized by XRD, SEM and PL. The kinds and amounts of coprecipitant (NaOH or aqueous ammonia) were found to affect the powder morphology and properties of gadolinium-europium oxalate precursors. Two crystalline precursors and one amorphous precursor were synthesized. The nanometer-sized amorphous gadolinium-europium oxalate precursor was first prepared using the oxalate coprecipitation technique. The calcined powders obtained from the amorphous precursor were nearly spherical in shape, and a narrow size distribution was obtained. The NaOH coprecipitant was more effective in the preparation of nanometer-sized spherical powders. A thermal decomposition process was conducted for the three kinds of precursors. The photoluminescence property was also measured as a function of europium content, and concentration quenching occurred for samples with europium concentrations of over 10 mol%.

• Bulletin of the Korean Chemical Society
• /
• 제23권10호
• /
• pp.1456-1458
• /
• 2002

A simple, sensitive and selective determination method of oxalate has been investigated based on the fluorescence enhancement of $Eu^{3+}$-TTA complex due to the formation of $Eu^{3+}$-TTA-oxalate ternary complex. An emission peak of $Eu^{3+}$-TTA, which is increased linearly with addition of oxalate, occurs at 610 nm in aqueous solution with excitation at 306 nm. The linear range of the calibration curve is 1 ${\times}$$10^{-6}$-8 ${\times}$$10^{-6}$ M and the detection limit is 1 ${\times}$$10^{-6}$ M. The effects of foreign ions were studied. The present method was applied to determine oxalate of two synthetic samples.

• Environmental Engineering Research
• /
• 제11권1호
• /
• pp.28-32
• /
• 2006

The degradation of atrazine was explored using UV alone, $H_2O_2/UV$, oxalate/UV and oxalate-assisted $H_2O_2/UV$. The addition of oxalate to the $H_2O_2/UV$ (oxalate-assisted $H_2O_2/UV$) process was the most effective method for the degradation of atrazine. The overall kinetic rate constant was split into the direct oxidation due to photolysis and that by the radicals from hydrogen peroxide or oxalate. In semi-empirical terms, the initial concentration of hydrogen peroxide had a greater contribution than that of oxalate for atrazine oxidation.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.455-461
• /
• 1995

To investigate the synthesis of $\beta$-Al2O3 and its crystallization behavior by oxalate coprecipitation method, the optimum pH range for oxalate coprecipitates has been theoretically calculated from the solubility products and the equilibrium constans of each metal ionic species and their solubility diagram wa obtained. The optimum pH range for oxalate coprecipitates at room temperature was estimated as <4. In experiment, we found that the optimum condition for oxalate coprecipitates was pH<1, which was not doped with pH controller. The Na+ ions were easily exchanged for the NH4+ ions of NH4OH which was used as pH controller, and those NH4+ ions were supposed to affect the crystallization behavior of $\beta$-Al2O3. The thermal decomposition of all complexes was almost complete below 40$0^{\circ}C$. The primary product of the decomposition process was m-Al2O3, which transformed to $\beta$"- or $\beta$-Al2O3 at temperature higher than 100$0^{\circ}C$. We found that the powder prepared at 120$0^{\circ}C$ had only $\beta$"- and $\beta$-Al2O3.EX>-Al2O3.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.395-401
• /
• 1989

The concentrations of Cu(II), Y(III) and Ba(II) ionic species in aqueous solution due to the formation of Cu2+-oxalate-complex have been theoretically calculated with respect to pH and their solubility diagrams could be obtained. It was verified from the calculation that the excess of Cu2+ and Ba2+ should be added in order to obtain oxalate coprecipitates with the molar ratio of Y : Ba : Cu=1 : 2 : 3. The exact amount of excess species has been calculated with respect to the initial concentrations of metal ions and pH.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.650-654
• /
• 2007

Many vegetables contain oxalate at various levels depending on their type and family. Oxalate is known to reduce mineral bioavailability from foods. The following study was conducted to determine soluble and total oxalate contents in 32 plant samples commonly consumed in Korea using high-performance liquid chromatography (HPLC). Chard, amaranth, and spinach contained total oxalate of >1,000 mg/100 g. Approximately 45% of the oxalate in amaranth is insoluble, whereas 74.46 and 92.45% of the oxalates in chard and spinach, respectively, was soluble oxalates, which may be removed by blanching. Eggplant, carrot, leak, ginger root, spinach, burdock, and sweet pepper contained more than 90% soluble oxalate in total oxalate content. However, all oxalates detected in lettuce and celery were insoluble. Oxalate was not detected in shepherd's purse, bellflower root, garlic, radish root, broccoli, cabbage, onion, lotus root, adlay, cucumber, kale, and pumpkin. These observations provide useful information needed for selection of vegetables.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.30-31
• /
• 2006

The LSCF cathode for Solid Oxide Fuel Cell was investigated to develop high performance unit cell at intermediate temperature by modified oxalate method with different electrolyte. The LSCF precursors using oxalic acid, ethanol and $NH_4OH$ solution were prepared at $80^{\circ}C$, and pH was controlled as 2, 6, 7, 8, 9 and 10. The synthesis precursor powders were calcined at $800^{\circ}C$, $1000^{\circ}C$ and $1200^{\circ}C$ for 4hrs. Unit cells were prepared with the calcined LSCF cathode, buffer layer between cathode and each electrolyte that is the LSGM, YSZ, ScSZ and CeSZ. The synthesis LSCF powders by modified oxalate method were measured by scanning electron microscope and X-ray diffraction. The interfacial polarization resistance of cell was characterized by Solatron 1260 analyzer. The crystal of LSCF powders show single phase at pH 2, 6, 7, 8 and 9, and the average particle size was about $3{\mu}m$. The electric conductivity of synthesis LSCF cathode which was calcined at $1200^{\circ}C$ shows the highest value at pH 7. The cell consist of GDC had the lowest interfacial resistance (about 950 S/cm@650) of the cathode electrode. The polarization resistance of synthesis LSCF cathode by modified oxalate method has the value from 4.02 to 7.46ohm at $650^{\circ}C$. GDC among the electrolytes, shows the lowest polarization resistance.

• 분석과학
• /
• 제10권3호
• /
• pp.203-208
• /
• 1997

출발물질로 $BaCl_2$와 $TiCl_4$를 사용하고 침전제로 dimethyl oxalate(DMO)를 사용하여 균일침전법에 의해 barium titanyl oxalate(BTO)를 제조하였다. 반응조건을 변화시켜 가면서 실험을 수행한 결과 반응 온도가 높을수록, [DMO]/[$Ba^{2+}+Ti^{4+}$]의 비율이 증가할수록 핵 형성시간이 단축되었으며 BTO 입자가 unimodal에서 bimodal을 거쳐 넓은 범위의 unimodal로 전환하는 속도가 빨랐다. 균일침전법으로 얻은 BTO를 $900^{\circ}C$에서 하소하여 얻은 barium titanate(BT)의 입자 크기는 통상의 공침법으로 합성한 BT 입자보다 큰 형태를 나타냈으며, 결정상은 tetragonal이었다. 또한 교반이 BTO 및 BT 분말의 특성에 큰 영향을 줌을 발견하였다.