• Journal of dental hygiene science
• /
• v.14 no.2
• /
• pp.114-122
• /
• 2014

The purpose of this study was to analyze the effect of mediating variables on the relationship between job stress and stress response. A survey was conducted to 243 clinical dental hygienists from January 15, 2013 to March 20, 2013 and the data were analyzed using t-test, one-way ANOVA, Pearson's correlation analysis, and hierarchical multiple regression analysis. The subjects who worked in poor working environment, had high level of role conflict and overload and aggressive nature showed high stress responsivity (p<0.01). The variable that showed mediation effect on the relationship between job stress and physical discomfort, depression was shown to be personality type (p<0.05). Also, the variable that showed mediation effect on the relationship between job stress and turnover intention was social support (p<0.05). According to the results, personality type and social support were shown to be important parameters when it came to the relationship between job stress and stress response. Therefore, in order to reduce negative outcomes caused by stress, it is suggested to provide an educational opportunity on self-control management while increasing social support from the organizational and structural level. Especially, it is asked to expand the system that provides encouragement and recognition to feel the sense of achievement in the course of their duty execution.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.3
• /
• pp.278-285
• /
• 2016

The key features of maritime accidents are the change of their attributes by new risks from time to time. To prevent maritime accidents in Korea, the impacts by new risks on domestic safety environments should be identified or predicted. The purpose of this paper is to find the hazard factors by new risks on maritime safety in Korea. The meaning of new risks is the elements of accident hazard which is compiled from new or rare or unprecedented events in the worldwide maritime transportations. The problems of new risks are the lacks of optimum countermeasures to mitigate accident risks. Using the questionnaires with 152 event scenarios classified by 20 accident causes, the hazard identification and risk analysis of new risks was performed based on the Formal Safety Assessment (FSA) by IMO. A total of 22 Influence Diagrams, which is to depict the transit flows between accident causes to consequences, is used in the construction of 152 event scenarios. A total of 20 accidents causes is the same contents as the causation factors represented in Statistical Year Book for Maritime Accidents of Korean Maritime Safety Tribunals. After defining the evaluation equations to the response results of questionnaires by 46 experts, the work for risk analysis is carried out. As results from the analysis of 152 scenarios, it is known that the root cause to affect on maritime safety in Korea is the pressure of business competition and it led to the lacks of well experienced crews, the overload of vessel operations and crew's fatigue. In addition, as results from the analysis of 20 accident causes, the three accident causes are to be candidate as main issues in Korea such as the inadequate preparedness of departure, the neglecting of watch keeping in bridge and the inadequate management of ship operations. All of the results are thought to be as basic hazard factors to safety impediments. It is thus found that the optimum Risk Control Options to remove the hazard factors and to mitigate consequences required are the following two factors: business competition and crewing problems.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.67-75
• /
• 2020

In this study, the risk of heat generation due to normal and overload currents that vary with the abnormal loosening angle of wire-connecting bolts were identified. The risks were analyzed based on the thermal characteristics to minimize the carbonization accidents of terminal blocks inside distribution panels typically used in industrial sites. We applied a method for measuring the heating temperature and temperature variations in the terminal blocks in real-time by installing a resistance temperature detector sensor board in the terminal block. The experimental results showed that the terminal block model with a low-rated current exhibited a higher heating temperature, thus, confirming the need to select the terminal block capacity based on load currents. Additionally, the higher the rated current of the terminal block with a high-rated current and the higher the degree of loosening, the faster the carbonization point. Such heating temperature monitoring enabled real-time thermal temperature measurement and a step-by-step risk level setting through thermal analysis. The results of the measurement and analysis of carbonization risks can provide a theoretical basis for further research regarding the risk of fire due to carbonization. Furthermore, the deterioration measurement method using the temperature sensor board developed in this study is widely applicable to prevent fires caused by poor electrical contact as well as risk-level management.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.95-104
• /
• 2005

Although the volume and complexity of available information have increased, our ability to process such volume of complex information has not been met with corresponding development. Information designers have been given the responsibility to address such unbalanced progress by developing effective visual systems to deliver and communicate such information to the masses in a manner that is quick and easy to process and understand. This study originated in recognition of these issues. This study seeks to find a solution to these issues in rhetorics in order to proliferate visual communications in recognition of the increasing importance of information and visual communication. Rhetorics, a field of study with a long history of analyzing the delivery of communication, provides numerous possibilities for the re-establishment of importance placed on visual information communication. Included in this study are (i) a thorough analysis of the principals of expression and logic offered by rhetorics, as applicable to information design (ii) a proposal to the solution to the above-mentioned issues encompassing the rhetoric process and methods of expression of information design and (iii) the practical application of these design principals to social activities. In order to provide an example of the practical use of the rhetoric methodology Presented in this study, we applied the rhetoric methodology to the 'Information Design for Public Transportation of Seoul.' and developed a new map and a guidebook. The raw data necessary for the foregoing were obtained through the analysis of the information designs that are currently in use in connection with mass transportation in Seoul and the survey evaluation conducted among Seoul residents. We modulated the infrastructure of Seoul by using 48 TAZs, computed the routes that are most likely to be used, and proposed the predictable information analysis process. The design proposed on this study encompasses color coding and use of combined information, and application of style and sequential information analysis process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.38-52
• /
• 2018

This study examined the effect sizes of psychological burnout-related factors on the psychological burnout of early childhood teachers by applying meta - analysis focusing on master 's theses, doctoral dissertations and journals that have been published in Korea for the past 20 years. The results of the analysis are as follows. First, the total effect size, the factor group, the sub-factor, and the positive and negative effect factors of the inducing and inhibiting factors showed a significant effect size. Second, in terms of inducing factors, the task problem group showed a larger effect size than the negative relationship group. Third, among the lower factor of the negative relationship group, all the sub factors excluding the negative relationship with the director, effect size showed a medium effect size. Fourth, task stress showed the greatest effect size among the sub factors of the task factor group, followed by role conflict, task overload, and role ambiguity. Fifth, resilience showed the greatest effect size among the inhibition factors, followed by organizational support factor, teacher efficacy factor, social support factor, and emotional factor. Sixth, all sub factors of the emotional labor factor group, organizational support factor of the organizational support factor group, general teacher efficacy factor of the teacher efficacy factor group, and all sub factors of social support factor Medium effect size. In addition, the lower factor of all the other factors showed a large effect size. Seventh, of the effect factors, job satisfaction factor, depression factor, and turnover intention factor all showed a large effect size.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.607-616
• /
• 2019

Free body diagram analysis is done for key parts of pilot stage of LLV (Load Limit Valve) which is used to protect overload for static structural test of aerospace flight vehicle. It is shown through the analysis that diameter ratio($D_2)^{ten}/D_2)^{comp}$) of two poppets in a pilot stage must be equal to piston area ratio($A_{comp}/A_{ten}$) of a hydraulic actuator for making a poppet open consistently at constant force applied by an actuator. The result of the analysis is verified by measuring geometries of the poppets in the four different LLVs which are corresponding to four actuators with different capacity and have been used after being imported in this laboratory. Results of "Adjuster resolution tests" with two different pilot stages show the max. deviation of Fi(actuator force in instant of opening poppet) from average Fi obtained for each turn of adjuster is 0.3KN and max. deviation of the Fi normalized by average Fi of each turn of adjuster is 3.7%. From the results, it is verified that the two pilot stages with same poppet diameter ratio make a poppet consistently open at Fis within ${\pm}3.7%$ deviation from the average Fi. The deviation is shown to be caused from frictional force of O-ring in the poppet. Additionally, design factors for poppet spring and adjuster, which are also key parts of the pilot stage, are distinguished and procedure for deciding the factors are also shown in this study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.507-524
• /
• 2002

Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.129-150
• /
• 1993

Since the restoration or masticatory function is the most important aim of implants, it should be substituted for the role of natural teeth and deliver the stress to the bone under the continous load during function. In natural teeth, stress distribution can be obtained through enamel, dentin and cementum and the elasticity of the periodontal ligament play a role of buffering action. In contrast, implant prosthesis has a very unique characteristics that it delvers the load directly to bone through the implant and superstructure. This fact arise the needs to evaluate the stress distribution of the implant in the mechnical aspects, which has a similar role of natural teeth but different pathway of stress. With 3 kinds of implant in prevalent use, 2 types of experimental PEA implant models were made, axisymmetric and 2-dimensional type. In axisymmetric model, the stiffness of the part including the prosthesis and implant which extrude out of bony surface could be calculated with displacement of the superstructure un er 100N vertical load and then damping effects could be determined through this stiffness. In axisymmetric FEA model, load to the bone could be deduced by evaluation the stress distribution of the designed surface under the 100N vertical force and in 2-dimensional model, 100N eccentric vertical load and 20N horizontal loda. The result are as follows. 1. In every implant, stress to the bone tends to be concenturated on the cortical bone. 2. Though the stress of the cancellous bone is larger at the apex of implants, it is less compared with cortical bone. 3. Under 20N horizontal load, stress of the left and right sides of implant shows a symmetrical pattern. But under 100N eccentric vertical load, loaded side shows much larger stress value. 4. In the 1mm interface, stress distribution among implants tend to have a similar pattern. But under 20N horizontal load apposite side of being loaded shows less stress in IMZ. 5. In the case of screw type implant, stress tends to vary along with screw shape. 6. According to the result determined with microstrain, cancellous bone id generally under the condition of overload, while cortical bone is usually within the limitation of physiologic load. 7. In the Branemark implant, maximum stress to the cortical bone is larger than any other implant except for the condition of 20N horizontal force and 0.05mm interface. 8. Damping effects of implants is maximum in IMZ.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.415-426
• /
• 2016

With a rapidly increasing number of foreign patients in Korea, it is necessary to manage and enhance the quality of nursing care for foreign inpatients through the promotion of studies on practical nursing care experience. This study is a qualitative study conducted to understand and describe the care experiences of nurses responsible for non-English speaking foreign inpatients. There were 10 nurses with a clinical career of more than two years included in this study for analysis. Data were collected through in-depth individual interviews and analyzed using qualitative content analysis. Five themes emerged from the analysis. 'Aware of cultural differences', 'establish trusting relationships through all my heart', 'additional nursing task', 'empathy for genuine nursing', 'sorriness and relieved'. The results of this study provided the understanding on the experiences of nurses, who do not speak English, but still responsible for providing care to foreign inpatients. Despite the language barrier, cultural differences, and work overload, nurses caring for foreign patients struggled with authenticity in nursing. On the other hand, as there was a lack of system resources, such as manuals and training materials in various languages other than English, institutions should put forth greater effort and resources to be prepared to care for foreign inpatients.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.373-388
• /
• 2010

Fracture causes serious problems in many instance of prosthetic failures. But it is hard to find the definite causes when fractures occur. Fractography encompasses the examination of fracture surfaces that contain features resulting from the interaction of the advancing crack with the microstructure of the material and the stress fields. All fractured specimens(implant retaining screw) retrieved from Gangneung-Wonju national university dental hospital for 3 years(from 2007 to 2009). After pretreatment of samples, the scanning electon microscope were used for surface examination and fracture analysis. In case of most of the fractured specimens, fracture took place by fatigue fracture and fractured surface represents fatigue striation. Fatigue striation indicate the progression of the crack front under cyclic loading, are characteristic of stage 2 crack growth. The site of crack initiation and stage 1 crack growth were not easily identified in any of the failure, presumably because of the complex microstructural features of the polycrystalline sample. In case of fractured by overload, dimpled or cleavage surface were observed. Using the interpretation of characteristic markings(ratchet mark, fatigue striation, dimple, cleavage et al) in fracture surfaces, failure events containing the crack origin, crack propagation, material deficiency could be understand. Using the interpretation of characteristic markings in fracture surfaces, cause and mechanism of fractures could be analyzed.