• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1283-1283
• /
• 2001

NIR spectroscopy has been used extensively to investigate the structure of water, alcohol and other self-associate molecules because the frequencies of NIR bands due to OH and NH groups strength of hydrogen bonds. We have studied the structure of water -methanol mixtures by use of NIR spectroscopy. Strong features in the 7200-6300 $cm^{-1}$ / region consist of a number of overlapped bands due to the combination of OH antisymmetric and symmetric stretching modes of water and the first overtone of the OH stretching modes of free and hydrogen bonded methanol, while weak fratures in the 6000-5800 cm-1 region are ascribed to the first overtones of $CH_3$ stretching modes of methanol. We will focus the discussion on the $CH_3$ stretching bands. They seem to show a significant shift is not clear from the spectra shown in figure 1(a). Figure 1(b) depicts the second derivative in the 6000-5700 $cm^{-1}$ / region. Now, it is clear from the second derivative that there are two major bands near 5950 and 5900 $cm^{-1}$ / and that they do show a shift be about 30 $cm^{-1}$ / Why do the $CH_3$ bands show the shift with increasing concentration of methanol\ulcorner Probably, the CH, group interacts directly with OH groups of water. The results in figure 1(b) demonstrate the usefulness of the second derivative in resolution enhancement as well as the potential of NIR spectroscopy in the studies of molecular interactions.(Figure omitted).

• Journal of Applied Biological Chemistry
• /
• 제58권4호
• /
• pp.355-361
• /
• 2015

The rice protein profiles of Oryza sativa L (Koshihikari) grown under organic and conventional cultivation regimes were compared on 2-D gels to develop diagnostic marker proteins for organic rice. The selected proteins, differentially expressed between organic and conventional rice, were compared with the differentially expressed proteins of another organic and conventional rice pairing, produced at a different location. In the first comparison among conventional, no-chemical, and organic rice grown in the same region, Korea, 13 proteins exhibiting differential expression in organic and conventionally grown plants were selected. Eight of the 13 proteins were down-regulated, and the 5 remaining proteins were up-regulated from conventional to organic rice. The second comparison pairing from Kyungju, revealed 12 differentially expressed proteins, with 8 down-regulated and 4 up-regulated proteins. Ten of the differentially expressed proteins that overlapped between the two comparison sets could not be clustered into any functional group using a functional annotation clustering tool. Further comparisons using another set of conventional and organic rice, belonging to a different variety of Oryza sativa L and produced in Sanchung, revealed 8 differentially expressed proteins, 5 of which were down-regulated and 3 of which were upregulated in the organic rice. Overall, 3 differentially expressed proteins were commonly found in all three organic rice crops. These 3 proteins, along with other overlapping differentially expressed proteins, can provide a good starting point for the development of signature proteins that can be used for the authentication of organic rice with a follow-up studies with more comparison sets.

• Journal of Microbiology and Biotechnology
• /
• 제27권3호
• /
• pp.598-609
• /
• 2017

Pediococcus pentosaceus ID-7 was isolated from kimchi, a Korean fermented food, and it showed high activity for lactose hydrolysis. The ${\beta}$-galactosidase of P. pentosaceus ID-7 belongs to the GH2 group, which is composed of two distinct proteins. The heterodimeric LacLM type of ${\beta}$-galactosidase found in P. pentosaceus ID-7 consists of two genes partially overlapped, lacL and lacM encoding LacL (72.2 kDa) and LacM (35.4 kDa). In this study, Escherichia coli MM294 was used for the production of LacL, LacM, and LacLM. These three types of recombinant proteins were expressed, purified, and characterized. The specific activities of LacLM and LacL were 339 and 31 U/mg, respectively. However, activity was not detected with LacM alone. The optimal pH of LacLM and LacL was pH 7.5 and pH 7.0, and the optimal temperature of LacLM and LacL was $40^{\circ}C$ and $50^{\circ}C$, respectively. The optimal temperature changes indicate that LacLM is able to achieve higher activity at a relatively lower temperature. LacLM was strongly activated by $Mg^{2+}$, $Mn^{2+}$, and $Zn^{2+}$, which was not true for LacL. Consistent with this, EDTA strongly inactivated LacLM and LacL, but the presence of reducing agents did not dramatically alter the activity. Taken together, multiple alignment of amino acid sequences and phylogenetic analysis results of LacL and LacM of P. pentosaceus ID-7 suggest the evolution of LacL into LacLM and that the use of divalent metal ions results in higher activity.

• 한국콘텐츠학회논문지
• /
• 제18권3호
• /
• pp.11-18
• /
• 2018

몰입 가상현실 환경에서 가상 객체들을 선택하고 조작하기 위해서는 사용자가 원하는 가상 객체를 빠르고 정확하게 선택할 수 있어야 한다. 가상현실에서 객체 선택을 위한 가장 알려진 접근 방법은 Ray-casting 방법이다. Ray-casting은 가상현실 환경에서 사용자의 손이나 시야 방향에서 직선으로 이동하는 가상의 선을 발사하고, 이 가상의 선이 발사되는 과정에서 충돌되는 가상 객체를 사용자가 선택할 수 있게 해주는 방법이다. 하지만, 가상 객체들이 겹쳐져 있는 상황에서는 사용자가 원하는 객체가 아닌 다른 객체들이 선택 될 수 있는 모호성 문제가 발생하게 된다. 이러한 방법을 해결하기 위해서 본 논문에서는 겹쳐진 가상 객체들 중 사용자가 원하는 객체를 선택하고자 하는 경우, 사용자가 겹쳐진 객체들의 그룹을 먼저 선택하게 한 후에 이 겹쳐진 객체들이 가지고 있는 기하학적인 연관관계를 계산하고 이를 사용자의 시점에서 겹쳐지지 않게 펼쳐서 시각화를 하는 Explosion-casting 방법을 제안한다. 제안한 방법의 평가를 위해서 기존의 Ray-casting 방법과 비교를 하였을 때, 겹쳐져 있는 가상 객체를 선택할 때 걸리는 속도와 정확도가 증가하는 결과를 보여주었다.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.478-486
• /
• 2005

Statement of problem : Fracture and dimensional change of an acrylic resin denture are a rather common occurrence. Purpose : The purpose of this study was to compare differences in dimensional changes and flexural strength of separate maxillary complete dentures after immediate deflasking by injection molding and conventional compression processing. Material and method: To evaluate dimensional stability, the maxillary dentures were fabricated by using different materials and methods. Lucitone 199(Dentsply Trubyte. york, pennsylvania, USA) and Vertex(Dentimex, zeist, Netherlands) were used as materials. Compression and injection packing methods were used as processing methods. The impression surface of the dentures was measured by 3D Scann-ing System(PERCEPTRON USA) and overlapped original impression surface of the master cast. To evaluate flexural strength, resin specimens were made according to the different materials, powder/liquid ratio and processing methods. Flexural strength of the complete resin specimens (64mm$\times$10mm$\times$3.3mm) were measured by INSTRON 4467. (INSTRON, England) The data was analyzed by ANOVA, t-test and Tukey test. (p<.05 level of significance) Result: The results were as follows 1. There was no significant differences between master model and denture base for each group in overall dimensional changes. 2. Palatal area was more stable than flange or alveolar area in dimensional stability. but. there was no significant differences among each area. 3. Materials and power/liquid ratio had an effect on flexural strength. (P<.05) Especially materials was most effective. (P<.05) 4. Lucitone 199(powder/liquid ratio followed by manufacturer's direction) showed higher flexural strength than Vertex. Conclusion : Dimensional stability or flexural strength are affected by materials rather than packing techniques.

• 식물분류학회지
• /
• 제40권3호
• /
• pp.145-152
• /
• 2010

한국산 백운풀속(Oldenlandia L.) 5종에 대하여 외부형태 형질을 재검토하고, 이중 25개의 양적 형질에 대한 수리분류를 통하여 분류군간의 한계를 파악하고자 하였다. 질적 형질에서 잎의 형태, 화서, 화관 내부의 연모, 열매의 상부 팽창, 종자의 형태 등이 분류군 간의 식별형질로 가치가 있었다. 양적 형질의 주성분분석 결과, 주성분 1과 주성분 2를 축으로 하는 산포도에서 산방백운풀(O. corymbosa), 탐나풀(O. hirsuta) 및 낚시돌풀(O. strigulosa)은 뚜렷하게 구분되었으나, 형태적으로 다소 유사한 제주백운풀(O. brachypoda)과 백운풀(O. diffusa)은 다소 겹치게 나타났다. 하지만 두 종은 형태적으로도 꽃받침 열편의 형태, 소화경의 길이, 수술대 및 주두의 길이 등의 차이로 뚜렷히 구분되었다. 또한 유집분석에 의해 두 종이 다르게 유집되는 것으로 나타났다.

• 정보처리학회논문지A
• /
• 제8A권4호
• /
• pp.489-498
• /
• 2001

본 논문에서는 하이퍼볼릭 평면에서 임의의 분산 데이터 보간을 지역적으로 제어하는 새로운 방법을 개발하였다. 지역적 제어와 관련된 주제는 상호대화형식의 디자인분야에서 매우 중요하다. 특히 본 논문에서 제안한 방법은 하이퍼볼릭 평면상에서 형성되는 genus-N 객체 모델을 상호대화형식으로 디자인하는데 유효하게 적용될 수 있다. 특 변화된 데이터가 미치는 영향이 일정한 지역에만 국한되므로 일반 사용자가 genus-N객체를 상호대화형으로 디자인하기가 훨씬 편리하다. 따라서, 본 연구은 genus-N 객체를 형성하는데 사용한 하이퍼볼릭 평면상에서의 전역적 보간법을 발전시켜 하이퍼볼릭 평면에서의 지역적 보간법개발 및 구현을 목적으로 하고 있다. 이는 다음과 같은 주요 과정을 통하여 구현된다. 먼저, 보간 함수를 지역화하기 위하여 하이퍼볼릭 영역을 임의의 삼각형 패치로 세분화하고 각 데이터에 인접한 삼각형 패치들의 모임을 부 영역이라고 정의한다. 각 부 영역에서 가중치 함수가 설정된다. 마지막으로 중첩된 삼각형 영역의 세 개의 가중치를 혼합함으로써 지역적 보간 함수가 완성된다. 그 결과로서, 여러 개의 샘플 데이터 및 함수를 사용하여 전역적MQ 보간법과 비교한다.

• Animal Bioscience
• /
• 제34권9호
• /
• pp.1460-1465
• /
• 2021

Objective: The study aimed to evaluate the diversity of donkey populations by comparing with the diversity of Thoroughbred and Jeju Halla horses; identified breeding backgrounds can contribute to management and conservation of donkeys in South Korea. Methods: A total of 100 horse (50 Thoroughbreds and 50 Jeju Halla horses) and 79 donkeys samples were genotyped with 15 microsatellite markers (AHT4, AHT5, ASB2, ASB17, ASB23, CA425, HMS1, HMS2, HMS3, HMS6, HMS7, HTG4, HTG10, LEX3, and VHL20), to identify genetic diversity and relationships among horses and donkeys. Results: The observed number of alleles per locus ranged from 1 (ASB17, HMS1) to 14 (AHT5), with a mean value of 4.87, 8.00, and 5.87 in Thoroughbreds, Jeju Halla horses, and donkeys, respectively. Of the 15 markers, AHT4, AHT5, ASB23, CA425, HMS2, HMS3, HTG4, HTG10, and LEX3 loci had relatively high polymorphism information content (PIC) values (PIC>0.5) in these three populations. Mean levels of genetic variation were H_E = 0.6721 and H_O = 0.6600 in Thoroughbreds, H_E = 0.7898 and H_O = 0.7100 in Jeju Halla horses, and H_E = 0.5635 and H_O = 0.4861 in donkeys. Of the 15 loci in donkeys, three loci had negative inbreeding coefficients (FIS), with a moderate mean FIS (0.138). The FIS estimate for the HTG4 marker was highest (0.531) and HMS6 marker was lowest (-0.001). The total probability of exclusion value of 15 microsatellite loci was 0.9996 in donkeys. Conclusion: Genetic cluster analysis showed that the genetic relationship among 79 donkeys was generally consistent with pedigree records. Among the three breeds, donkeys and Thoroughbred horses formed clearly different groups, but the group of Jeju Halla horses overlapped with that of Thoroughbred horses, suggesting that the loci would be suitable for donkey parentage testing. Therefore, the results of this study are a valid tool for genetic study and conservation of donkeys.

• 대한조현병학회지
• /
• 제17권1호
• /
• pp.36-42
• /
• 2014

Objectives : The dysfunctional neural networks underlying self-evaluation in schizophrenia are overlapped with the neural structures involved in emotion regulation. The purpose of this study was to investigate the influence of anhedonia on the self-evaluation attitude of patients with schizophrenia. Methods : Twenty healthy controls and twenty patients with schizophrenia performed a self-evaluation task, presenting a pair of the face (self, familiar other, and unfamiliar other) and word (negative, neutral, and positive noun) at the same time. Participants were asked to evaluate relevance between the pairs by pressing a corresponding button. Relevance rating scores were compared between the groups and were correlated with the severity of physical and social anhedonia. Results : Patients evaluated the condition of a self face with a negative word and a familiar face with a negative word to be more relevant than healthy controls. In the patient group, the scores of relevance rating in the condition of an unfamiliar other face with a negative word were positively correlated with the anhedonia scale scores (physical : r=0.486, p=0.030 ; social : r=0.499, p=0.025). There was no correlation between the self-evaluation attitude and the severity of anhedonia. Conclusion : Patients with schizophrenia evaluate themselves badly in only negative circumstances, and anhedonia is not related to self-evaluation, but rather other-evaluation.

• 한국지진공학회논문집
• /
• 제28권3호
• /
• pp.129-139
• /
• 2024

In this study, the SBC system, a new mechanical joint method, was developed to improve the constructability of precast concrete (PC) beam-column connections. The reliability of the finite element analysis model was verified through the comparison of experimental results and FEM analysis results. Recently, the intermediate moment frame, a seismic force resistance system, has served as a ramen structure that resists seismic force through beams and columns and has few load-bearing walls, so it is increasingly being applied to PC warehouses and PC factories with high loads and long spans. However, looking at the existing PC beam-column anchorage details, the wire, strand, and lower main bar are overlapped with the anchorage rebar at the end, so they do not satisfy the joint and anchorage requirements for reinforcing bars (KDS 41 17 00 9.3). Therefore, a mechanical joint method (SBC) was developed to meet the relevant standards and improve constructability. Tensile and bending experiments were conducted to examine structural performance, and a finite element analysis model was created. The load-displacement curve and failure pattern confirmed that both the experimental and analysis results were similar, and it was verified that a reliable finite element analysis model was built. In addition, bending tests showed that the larger the thickness of the bolt joint surface of the SBC, the better its structural performance. It was also determined that the system could improve energy dissipation ability and ductility through buckling and yielding occurring in the SBC.