• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.163-175
• /
• 2017

In land seismic exploration, irregular surface topography and weathering layer in near surface distorts the reflected signals of data. Therefore, typical land seismic data should be compensated for this distortion by static correction. To perform the static correction, near-surface velocity is required, which can be obtained by seismic refraction survey. However, land seismic data is often acquired in a limited form of geometry depending on the equipment availability, accessibility condition, and permission for the survey site. In this situation, refraction analysis should be performed using reflection data because it is impossible to acquire refraction-oriented data due to limited source and receiver geometry. In this study, we aimed to analyze the reliability of the results obtained by refraction traveltime tomography when using reflection data with a limited number of sources and receivers from irregular surface topography. By comparing the inversion result from irregular topography with that from flat surface, we found that the surface topography affects the reliability of the inversion results to some degree. We also found that the number of sources has little effect on the inversion results unless the number of sources are very small. On the other hand, we observed that velocity distortion occurred in the overlapped part of receiver arrays when using a limited number of receivers, and therefore suggested the size of the least overlapping ratio to avoid the velocity distortion. Finally, we performed numerical tests for the model which simulates the surface topography and acquisition geometry of the survey region and verified the reliability analysis of inversion results. We identified reliable areas and suspicious area of the inverted velocity model by applying the analysis results to field data.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.93-93
• /
• 2017

To develop rice cultivars with increased biomass and grain yield, superior lodging resistance is an essential trait. The new breeding approach can be adopted for the improvement of stem lodging resistance by enhancing culm strength. The resistance to breaking type lodging is attributed to bending moment of basal culm (M), which is composed of the section modulus (SM) and bending stress (BS). The resistance to the bending type lodging is attributed to flexural rigidity (FR) of stem, which is composed of the secondary moment of inertia (SMI) and Young's modulus (YM). Starch and cell wall components such as cellulose, hemicellulose and lignin also play a significant role in physical strength of culm, and thus affect lodging. Leaf Star has a superior lodging resistance due to its thick and stiff culm because of its high M and FR compared with Koshihikari. Furthermore, Leaf Star contains high densities of hemicellulose, cellulose and low lignin density in culm compared with Koshihikari. In this study, we performed QTL analysis for these traits associated with culm strength, using 94 recombinant inbred lines (RILs, $F_8$), derived from a cross between Leaf Star and Koshihikari. The SM in the RILs showed a continuous distribution. QTLs for SM were detected on chrs.2, 3 and 10. Leaf Star alleles increased SM on chrs. 2 and 3, but Koshihikari allele increased on chr.10. These QTLs overlapped with those QTLs identified using backcrossed inbred line derived from a cross between Chugoku 117 and Koshihikari, the parents of Leaf Star. The FR in Leaf Star was higher than that in Koshihikari due to the larger SMI and YM. 3 QTLs for SMI were detected on chrs.2, 3 and 10. Leaf Star alleles increased SMI on chrs.2 and 3, and Koshihikari alleles increased on chr.10. One QTL on chr.3 and two QTLs on chr.5 for hollocelulose content were detected with Leaf Star alleles contribution. Moreover, two QTLs were detected for hemicellulose density on chrs.3 and 5. Leaf Star allele increased hemicellulose density on chr.5, and Koshihikari allele increased on chr.3. Furthermore, two QTLs for cellulose density were detected on chr.5, and one QTL on chr.2. For starch content, one QTL on chr.3 and two QTLs on chr.5 with Leaf Star alleles contribution were detected. TULK-6 carrying a chromosome segment of Leaf Star on chr.5 in the Koshihikari genetic background showed higher densities of starch and hemicellulose than those in Koshihikari. These results suggest that the detected QTLs for culm strength could be utilized for the improvement of lodging resistance in rice by marker-assisted selection.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.133-133
• /
• 2017

Lodging is one of the important constraints in rice production. The lodging destroys the canopy structure, and sharply reduces the capacity of photosynthetic rate and dry matter production. In cereal crops, stem lodging can be classified into two types: stem breaking type and stem bending type. To improve stem lodging resistance, it is important to reveal strong culm traits of superior lodging resistant varieties. There are large varietal differences in parameters associated with the bending moment at breaking (M) and flexural rigidity (FR). The indica variety Takanari possesses large M due to its large section modulus (SM) despite of its small bending stress (BS), while Takanari also has large FR due to its large secondary moment of inertia (SMI) and Young's modulus (YM). To identify quantitative trait loci (QTLs) and the corresponding genes associated with the parameters for M ($=SM{\times}BS$) and FR ($=SM{\times}YM$) should enable to develop lodging resistant varieties, efficiently. In order to identify QTLs for cell wall materials such as cellulose, hemicellulose and lignin associated with BS and YM, a set of Chromosome Segment of Substitution Lines (CSSLs) consisted of 37 lines with chromosome segments of Koshihikari in the genetic background of Takanari were used. Takanari had large M and small BS as compared with Koshihikari. The QTLs for BS were estimated on chromosomes 3, 5, 6, 8, 9, 10, 11 and 12. Koshihikari alleles increased BS in these QTLs. Takanari had a large FR due to its large SMI and YM as compared with Koshihikari. The YM was increased by substitution of the Koshihikari chromosomal segments on chromosomes 2, 10 and 11. Other QTLs estimated on chromosomes 7 and 12 that Koshihikari alleles contributed to the decrease of YM. For lignin, only one major QTL for lignin density was detected on chromosome 11. Hollocellulose densities were increased by the substitution of Koshihikari segments on chromosomes 5 and 11. On the other hand, these were decreased on chromosomes 1 and 3 by substitution of Koshihikari segments. QTLs for cellulose density were estimated on chromosomes 1, 3 and 5 by substitution of Koshihikari segments. For hemicellulose, QTL on chromosome 3 showed that hemicellulose density decreased by the substitution of Koshihikari segment. However, hemicellulose densities on chromosomes 5, 8 and 11 showed the opposite effects. The QTLs for hemicellulose, cellulose, and hollocelulose densities identified on chromosome 5 overlapped with that for bending stress, indicating the positive effect of Koshihikari segment on increasing bending stress. These results suggest that some QTLs for the densities of cell wall materials contribute to increasing bending stress and Young's modulus, and could be utilized to improve the lodging resistance for both types of breaking and bending in rice varieties.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.308-308
• /
• 2017

The low and unstable yield of soybean has been a major problem in Japan. Excess soil moisture conditions are one of the major factors to restrict soybean productivity. More than 80 % of soybean crops are cultivated in converted paddy fields which often have poor drainage. In central and eastern regions of Japan, the early vegetative growth of soybean tends to be restricted by the flooding damage because the early growth period is overlapped with the rainy season. Field observation shows that induced excess water stress in early vegetative stage reduces dry matter production by decreasing intercepted radiation by leaf and radiation use efficiency (RUE) (Bajgain et al., 2015). Therefore, it is necessary to evaluate the responses of soybean growth for excess water conditions to assess these effects on soybean productions. In this study, we aim to modify the soybean crop model (Sinclair et al., 2003) by adding the components of the restriction of leaf area development and RUE for adaptable to excess water conditions. This model was consist of five components, phenological model, leaf area development model, dry matter production model, plant nitrogen model and soil water balance model. The model structures and parameters were estimated from the data obtained from the field experiment in Tsukuba. The excess water effects on the leaf area development were modeled with consideration of decrease of blanch emergence and individual leaf expansion as a function of temperature and ground water level from pot experiments. The nitrogen fixation and nitrogen absorption from soil were assumed to be inhibited by excess water stress and the RUE was assumed to be decreasing according to the decline of leaf nitrogen concentration. The results of the modified model were better agreement with the field observations of the induced excess water stress in paddy field. By coupling the crop model and the ground water level model, it may be possible to assess the impact of excess water conditions for soybean production quantitatively.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.192-200
• /
• 2012

For the development of genetically modified plants, it is important to verify various factors which potentially affect the risk assessment as well as to establish an experimental program to produce scientific and reliable data. However, it is a time and cost consuming process to develop GM plants as well as to prepare scientific and convincible data for government's approval. Therefore, using the transgenic hot pepper tolerant to a new CMV pathotype, we attempted to suggest few methodological procedures, such as probe saturation for southern blot analysis and RT-PCR and ELISA for expression analysis, for identification and stability evaluation of inserted gene in genetically modified plant which are required for submission for approval. Ten partially overlapped probes covering full length of inserted gene were produced. We could identify that the inserted gene was stacked as a single copy as well as no partial element existed. Also, we could identify the stability of the inserted gene stacked in hot pepper using probe saturation. In the expression analysis with RT-PCR and ELISA, we also could provide the stable expression of transcript and proteins in leaves and placenta and pericarp of fruits of the CMV-resistant hot pepper.

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.179-191
• /
• 2014

In this paper, a frame transmission method to make IEEE 802.15.4 nodes run at a new channel and its characteristics are studied when they experience difficulties in transmission of frames due to WiFi traffic. The researches on evaluating the interference from WiFi traffic, searching for a new channel with little interference or not, and changing the operating channel are analyzed. In an wireless channel overlapped with IEEE 802.11 network, the transmission delay of IEEE 802.15.4 frames, the collision of frames in sending IEEE 802.15.4 frames without applying CSMA-CA algorithm, and the operation of IEEE 802.11 nodes are explained. A transmission method of frames including frame-formated code blocks in order to use the rest part of collided IEEE 802.15.4 frame is proposed. In the experiments of the proposed method, it is observed that frame-formated code blocks are synchronized and received by receivers in case of collision, and then the collided positions in IEEE 802.15.4 frame and the characteristics of frame reception rate are analyzed. The experimental results show that the performance of the proposed method is improved in comparison to an existing method when we measure the time taken to send a channel change command and get the response in order to avoid the interference from WiFi traffic.

• Korean Journal of Ecology and Environment
• /
• v.47 no.1
• /
• pp.24-31
• /
• 2014

This study was conducted to clarify the seasonal and elevational pattern of herbivore's feeding pattern in a temperate deciduous forest. We investigated the herbivore's feeding activity for three years (2011~2013) at three survey sites in Mt. Jirisan National Park (Piagol, Siamjae, Nogodan). We selected target tree species based on the dominance across the sites (Quercus, Acer, Rhododendron and Carpinus) and scored herbivore's feeding activity every one or two weeks from April to June using leaf damage index. We found that the herbivory started early at the low elevation site (Piagol, ${\approx}300m$), and the highest feeding activity occurred at the mid elevation site (Siamjae, ${\approx}900m$). At the highest elevation site (Nogodan, ${\approx}1300m$), the herbivory started late, but the total feeding activity accumulated quickly. Compared to the breeding time of Varied tit, an insectivore bird, it was overlapped with the feeding activity period of herbivores, suggesting close interaction among plants, insects and birds in this deciduous forest. We suggested a need of long-term monitoring of this tri-trophic interaction since duration of herbivore activity can be changed followed by climate change.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.6
• /
• pp.51-60
• /
• 2014

This study was carried out to analyze the home ranges of three medium-sized mammals(Nyctereutes procyonoides, Prionailurus bengalensis, and Meles leucurus) inhabiting the Sobaeksan National Park, Korea. Three individuals of each species were captured using live traps(Tomahawk live trap 210A) and radio tracking was conducted from June 2012 to May 2014 using VHF and CDMA methods. We determined that the home range of N. procyonoides was $6.53{\pm}6.66km^2$(MCP 100), $3.39{\pm}4.73km^2$(FK 95), and $0.48{\pm}0.62km^2$(FK 50), that of P. bengalensis was $7.13{\pm}5.61km^2$(MCP 100), $7.77{\pm}3.91km^2$(FK 95), and $1.88{\pm}0.96km^2$(FK 50), and that of M. leucurus was $1.77{\pm}1.82km^2$(MCP 100), $3.17{\pm}4.52km^2$(FK 95), and $0.63{\pm}0.87km^2$(FK 50). The home ranges of both N. procyonoides and P. bengalensis were greater than that of M. leucurus, and moreover, both were larger than $6km^2$(P. bengalensis>N. procyonoides). The results also showed that for each species, 1.2~4.4% of the home range overlapped with that of the other two species and that this overlap occurred in the vicinity of a water system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.129-137
• /
• 2013

A force calibration of a nanoindenter and a 3D morphology observation of indenters were carried out in this study. A microbalance calibrated with standard weights was used for measuring the loads generated by a nanoindenter. The indentation load could be calibrated from the ratio of measured and generated loads and the first contact load also could be detected from the microbalance data. By analyzing atomic force microscopy images of two indenters, curvature radii of apexes were determined by $19.71{\pm}3.03$ and $1043.94{\pm}50.91$ nm, respectively, for the nearly new indenter A and the severly worn indenter B. Corresponding bluntness depths were estimated by 1.22 and 64.56 nm for the both indenters by overlapping their profiles on the perfect pyramidal shape. In addition, nanoindentation curves obtained from a fused silica reference material with the both indenters showed a depth difference corresponding to the bluntness depth difference along the indentation depth axis. By shifting amounts of the bluntness depths along the horizontal axis, whole nanoindentation curves overlapped on themselves and resulted in nanohardness values consistent within 1.11 % without considering the complex indenter area function of each indenter.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.293-307
• /
• 2020

Every year, the floating macroalgae, green and golden tide, are massively detected at the Yellow Sea and East China Sea. After influx of them to the aquaculture facility or beach, it occurs enormous economic losses to remove them. Currently, remote sensing is used effectively to detect the floating macroalgae flowed into the coast. But it has difficulties to detect the floating macroalgae exactly because of the wavelength overlapped with other targets in the ocean. Also, it is difficult to distinguish between green and golden tide because they have similar spectral characteristics. Therefore, we tried to distinguish between green and golden tide applying the Deep learning method to the satellite images. To determine the network, the optimal training conditions were searched to train the AlexNet. Also, Gaofen-1 WFV images were used as a dataset to train and validate the network. Under these conditions, the network was determined after training, and used to confirm the test data. As a result, the accuracy of test data is 88.89%, and it can be possible to distinguish between green and golden tide with precision of 66.67% and 100%, respectively. It is interpreted that the AlexNet can be pick up on the subtle differences between green and golden tide. Through this study, it is expected that the green and golden tide can be effectively classified from various objects in the ocean and distinguished each other.