• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.460-461
• /
• 2008

A new AC-PDP driving method was proposed to reduce the address period. The overlapped scan method can reduce the address period. However, this method has a narrow address voltage margin compared with conventional scan method in this paper, Slope overlapped scan method is presented. The proposed new overlapped scan method allows wider address voltage margin than conventional overlapped scan method.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.322-329
• /
• 2015

This paper presents a new overlapped coilgun configuration to launch medium weight projectiles. The proposed configuration consists of a two-stage coilgun with overlapped coil covers with spacing between them. The theoretical operation of a multi-stage coilgun is introduced, and a transient simulation was conducted for projectile motion through the launcher by using a commercial transient finite element software, ANSOFT MAXWELL. The excitation circuit design for each coilgun is reported, and the results indicate that the overlapped configuration increased the exit velocity relative to a non-overlapped configuration. Different configurations in terms of the optimum length and switching time were attempted for the proposed structure, and all of these cases exhibited an increase in the exit velocity. The exit velocity tends to increase by 27.2% relative to that of a non-overlapped coilgun of the same length.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.19-27
• /
• 2019

This paper proposes a new method using multi-layer overlapped windows to improve the performance of YOLO network which is vulnerable to detect small dense objects. In particular, the proposed method uses the YOLO Network based on the multi-layer overlapped windows to track small dense vehicles that approach from long distances. The method improves the detection performance for location and size of small vehicles. It allows crossing area of two multi-layer overlapped windows to track moving vehicles from a long distance to a short distance. And the YOLO network is optimized so that GPU computation time due to multi-layer overlapped windows should be reduced. The superiority of the proposed algorithm has been proved through various experiments using captured images from road surveillance cameras.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.79-87
• /
• 2011

This paper presents the optimal design of an overlapped ultrasonic sensor ring for high resolution obstacle detection of an autonomous mobile robot. It is assumed that a set of low directivity ultrasonic sensors of the same type are arranged along a circle of nonzero radius at a regular spacing with their beams overlapped. First, taking into account the dead angle region, the entire range of obstacle detection is determined with reference to the center of an overlapped ultrasonic sensor ring. Second, the optimal design index of an overlapped ultrasonic sensor ring is defined as the area closeness of three sensing subzones resulting from beam overlap. Third, the lower and upper bounds on the number of ultrasonic sensors are derived, which can guarantee minimal beam overlap and also avoid excessive beam overlap among adjacent ultrasonic sensors. Fourth, employing a commercial low directivity ultrasonic sensor, an optimal design example of an overlapped ultrasonic sensor ring is given along with the ultrasonic sensor ring prototype mounted on top of a mobile robot. Finally, some experimental results using our prototype ultrasonic sensor ring are given to demonstrate the validity and performance of an optimally overlapped ultrasonic sensor ring for high resolution obstacle detection.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.104-113
• /
• 2015

In developing a tire, many CAE analyses are performed to make a better tire. But its meshing work is not easy, and it takes much time. One of the reasons of taking much time is that there are many overlapped geometric entities in CAD data that are modeled in CAD system by CAD engineers. In this study, we studied about the features of the overlapped geometric entities, and the method to find out and delete them. I developed a program using the proposed algorithm, and applied it in meshing tire pattern and tire case. I proved that the time in meshing a tire reduced dramatically by removing overlapped geometric entities by using the developed program.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2250-2264
• /
• 2006

In micro- and nanoflows, the Boltzmann distribution is valid only when the electric double layers (EDL's) are not overlapped and the ionic distributions establish an equilibrium state. The present study has numerically investigated unsteady two-dimensional fully-developed electroosmotic flows between two parallel flat plates in the nonoverlapped and overlapped EDL cases, without any assumption of the Boltzmann distribution. For the study, two kinds of unsteady flows are considered: one is the impulsive application of a constant electric field and the other is the application of a sinusoidally oscillating electric field. For the numerical simulations, the ionic-species and electric-field equations as well as the continuity and momentum ones are solved. Numerical simulations are successful in accurately predicting unsteady electroosmotic flows and ionic distributions. Results show that the nonoverlapped and overlapped cases are totally different in their basic characteristics. This study would contribute to further understanding unsteady electroosmotic flows in micro- and nanofluidic devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1237-1240
• /
• 2005

The effects of various sustain waveforms on the discharge characteristics, such as discharge current waveform, IR waveform, luminance, luminous efficiency, power consumption, and static margin are investigated under high Xe (20%) gas mixture at 200 kHz. The four types of sustain waveforms, such as non-overlapped sustain waveform without auxiliary pulse, non-overlapped sustain waveform with auxiliary pulse, overlapped sustain waveform without auxiliary pulse, overlapped sustain waveform with auxiliary pulse, are examined intensively. As a result, the overlapped sustain waveform with auxiliary pulse shows the best discharge characteristics under high Xe (20%) gas mixture at 200 kHz.

• 방송공학회논문지
• /
• 제24권5호
• /
• pp.785-790
• /
• 2019

본 논문에서는 적응적 중첩 블록 움직임 보상 방법을 이용한 새로운 양방향 프레임 율 향상 방법을 제안한다. 제안한 방법에서는 참조 영역의 움직임 복잡도에 기반한 적응적 중첩 블록 음직임 보상 방법이 사용된다. 움직임 복잡도는 이전에 부호화된 움직임 추정과정에서 판단되므로 중첩 블록 움직임 보상 방법에 적응적 기법을 추가적인 계산 복잡도 없이 적용 가능하다. 실험결과는 제한한 방법이 기존 방법에 비해 객곽적, 주관적 화질에서 우수함을 보여준다.

• 한국분무공학회지
• /
• 제6권1호
• /
• pp.35-43
• /
• 2001

Previous studies on image processing techniques for panicle size measurement usually have focused on a single panicle or weakly overlapped particles. In the present work, the image processing algorithm for particle size measurement has been improved to process heavily-overlapped spherical-particle images. The algorithm consists of two steps; detection of boundaries which separate the images of the overlapped panicles from the background and the panicle identification process. For the first step, Sobel operator (using gray-level gradient) and the thinning process was adopted, and compared with the gray-level thresholding method that has been widely adopted. In the second, Hough transform was used. Hough transform is the detection algorithm of parametric curves such as straight lines or circles which can be described by several parameters. To reduce the measurement error, the process of finding the true center was added. The improved algorithm was tested by processing an image frame which contains heavily overlapped spherical panicles. The results showed that both the performances of detecting the overlapped images and separating the panicle from them were improved.

• 한국정보통신학회논문지
• /
• 제21권1호
• /
• pp.157-164
• /
• 2017

본 연구는 균일한 조명을 얻기 위해 중첩 조명 모델(overlapped illumination model)을 사용하여 자유 형상 렌즈(freeform lens)를 제작하였으며, 제작한 LED 렌즈들의 특성을 비교 분석하였다. 제작한 렌즈는 LED 광원의 위치변화, 두께 및 기울임을 이용해 성능을 평가하였다. 아울러 조명영역은 평균 조도 (average illuminance)와 조도 균일도 (illuminance uniformity) 변화 값으로 측정하였다. 광도 분포의 Z축 방향변화에 대해서는 중첩 모델과 발산 모델이 대체로 비슷한 공차 특성을 보였으나, 렌즈두께 변화에 대해서는 중첩모델이 발산모델에 비해 조도 균일도 공차 특성은 현저히 개선됨을 확인하였다. 또한, 발산 조명 모델로 설계된 렌즈가 전반적으로 좋은 성능을 나타냈으나, LED 방출에 대한 성능은 중첩 모델에서 그 편차의 폭이 상대적으로 적게 나타났다.