• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.118-123
• /
• 2016

Overlap cutting is a fundamental method of applying abrasive water jet (AWJ) machining to milling to produce a wider surface because the nozzle outlet is approximately 1.0 mm wide. In this study, the effects of overlap cutting on the depth profile and surface roughness are investigated. The overlapping area depends on the amount of step over, which is controlled in the pick-feed direction. If the step over is equal to or larger than the diameter of the nozzle, no overlap cut occurs but large cusps remain between the cut paths. A step over as small as one-thirds of the nozzle diameter may lead to triple-overlap cutting resulting in an extraordinary depth. By using pocket milling experiments with a step over of 0.46 (or 0.47), it is verified that AWJ can produce a milled surface of titanium, one of the hard-to-cut materials, with $76{\mu}m$ Ra.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.31-36
• /
• 2009

In this paper, the laser cutting characteristics of the flexible PCB using high power Nd:YAG UV laser were investigated. A specific FPCB model was selected for the experiment. Test sheets were made, which had equal materials and layer structure to those of the outline (OL) region and the contact pad (CP) region in the FPCB. The experiment is made up of two stages. In the first stage of the experiment, the laser cutting fluence was found, which is the threshold fluence to cut the test sheets completely. The laser cutting fluence of the OL sheet is $1781.26{\sim}1970.16\;J/cm^2$ and that of the CP sheet is $2109.34{\sim}2134.34\;J/cm^2$. In the second stage, cutting performance and its qualities were analyzed by the experiment. The laser cutting performance remained almost unchanged for all laser and process parameter sets. The average cutting width (top side/bottom side) of the OL sheet was $40.45\;{\mu}m/11.52\;{\mu}m$ and that of the CP sheet was $22.14\;{\mu}m/10.93\;{\mu}m$. However, the laser cutting qualities were different according to the parameters. The adjacent region of the cutting line on the OL sheet was carbonized as the beam speed was low and the overlap coefficient was high. The surface quality around the cutting line of the CP sheet was about the same. Carbonization and debris occurred on the surface of the cutting line. As a result of the experiment, the cutting qualities were better as the overlap coefficient was made low and beam speed high. Therefore, the overlap coefficient 2 or 3 is proper for the FPCB laser cutting.

• 한국정밀공학회지
• /
• 제7권1호
• /
• pp.53-62
• /
• 1990

High speed and heavy cutting performed for improving the surface quality and productivity, are often prevented due to chatter phenomena. Chatter is a violent relative vibration between workpiece and tool in machining of metals, and is an important limiting factor of production rate and surface quality, and reduces the tool life and the dynamic performance of machine tool itself. In this study, in order to suppress the chatter, a modified tool-post combined with the spring and damper was designed and used in the actual cutting test. The results of this study are summerized as follows; The spring and damper adopted in the modified tool-post have the suppressing effects of chatter, and there exists an optimum combination between spring constant and damping ratio.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.39-44
• /
• 2004

A heat and room temperature construction method of asphalt have been mainly applying to rooftop waterproofing in concrete structure, and the rest construction method are sheet, membrane and mortar waterproofing construction method. In particular, joint method in sheet waterproof method is as overlap joint which on being reinforced with fiber and tape, have been applying for job site to mechanical fix using protection disk and anchorage and metal ironwork on the end of sheet. These construction method cause cutting off joint of sheet as behavior of structure according to repairs of sheet itself and thermal conduct, outdoor air environment. In conclusion, we analyzed and examined the application of various sheets and piece ashes about superior 'I' joint which divide from one and the other sheet and progressed about joint construction method of fixing method for overlap.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.137-141
• /
• 1993

In the case of a boring bar, the vibration amplitude is generallylarge due to its high slenderness. The boring bat is then modelled as a cantilever with dynamic force acting at the free end and a generalized model of nonlinear continous system is obtained. The Analysis of model is conducted for the specific case with a zero side cutting edge angle. The dynamic behaviour is investigated for machining processes in which the the overlap factor of regenerative effect is considered. The vibration characteristics of boring bar depth of cut rather than feed rate in given slenderness.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6047-6052
• /
• 2013

화장품제조업은 동일한 제품을 대량으로 생산하고 소비되는 구조로 금형을 통한 생산은 필연적이다. 화장품을 담는 용기는 소비자의 구매의사에도 영향을 주는 요소이며 완제품가격에서 차지하는 부분이 크기 때문에 경제성, 심미성과 기능성을 충족시키는 금형이 필요하다. 화장품 용기 중에 사각형태의 용기는 미성형 불량이 다른 형태의 제품보다 자주 발생하는 특징을 가진다. 기존에 사각형 형태의 화장품용기 제작공정은 2단 금형에 사이드게이트 구조로 금형을 제작하는데 이는 후가공과 게이트 흔적이 남는 단점이 있다. 본 연구에서 제안한 오버랩게이트는 후가공이 거의 없고 음각으로 게이트가 절단되는 특징이 있으며, 사이드게이트와 비교하여 Moldflow를 이용한 유동시스템을 시뮬레이션 하였다. 오버랩게이트가 유동성, 고화, 밀도, 에어트랩 등에서 유동성 향상과 불량률을 낮출 수 있는 결과를 확인하였으며, 해석결과를 기반으로 금형을 제작을 하고 사출성형 하였다. 본 연구를 통해 미성형 불량을 줄이고 심미성, 기능성 등의 특성을 가지는 화장품용기 제품의 대량생산 가능성을 검증하였다

• 경영과학
• /
• 제22권1호
• /
• pp.167-178
• /
• 2005

The 2DBPP(Two-Dimensional Bin Packing Problem) is a problem of packing each item into a bin so that no two items overlap and the number of required bins is minimized under the set of rectangular items which may not be rotated and an unlimited number of identical .rectangular bins. The 2DBPP is strongly NP-hard and finds many practical applications in industry. In this paper we discuss a tabu search approach which includes tabu list, intensifying and diversification Strategies. The HNFDH(Hybrid Next Fit Decreasing Height) algorithm is used as an internal algorithm. We find that use of the proper parameter and function such as maximum number of tabu list and space utilization function yields a good solution in a reduced time. We present a tabu search algorithm and its performance through extensive computational experiments.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.184-189
• /
• 2005

An experimental study of the femtosecond laser machining of Si materials was carried out. Direct laser machining of the materials for the feature size of a few micron scale has the advantage of low cost and simple process comparing to the semiconductor process, E-beam lithography, ECM and other machining process. Further, the femtosecond laser is the better tool to machine the micro parts due to its characteristics of minimizing the heat affected zone(HAZ). As a result of line cutting of Si, the optimal condition had the region of the effective energy of 2mJ/mm-2.5mJ/mm with the power of 0.5mW-1.5mW. The polarization effects of the incident beam existed in the machining qualities, therefore the sample motion should be perpendicular to the projection of the electric vector. We also observed the periodic ripple patterns which come out in condition of the pulse overlap with the threshold energy. Finally, we could machined the groove with the linewidth of below $2{\mu}m$ for the application of MEMS device repairing, scribing and arbitrary patterning.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.122-133
• /
• 1999

완성되어진 블록을 이용한 탑재의 과정에서 발생하는 블록 경계간의 판재 겹쳐짐 현상, 과도한 간격 및 단차의 발생현상은 선박의 건조비용과 공수를 증가시키는 요인이 된다. 본 논문에서는 블록의 조립 및 탑재에 관한 시뮬레이션 시스템을 제안하고 이중 조립에 관한 시뮬레이션을 용접순서에 따라 용접변형 및 자중을 고려하여 유한요소해석을 ANSYS를 이용하여 수행하였다. 용접에 의한 변형은 실험에 의한 변형량을 이용한 등가강성에 따른 등가 하중을 사용하여 탄성적인 해석법을 수행하여 예측하였으며 선체 이중저 평블록을 패널 조립법에 근거한 조립순서에 따라 시뮬레이션을 수행하였다. 시뮬레이션을 통한 변형으로부터 조립순서에 따른 중간 제품의 형상의 변화에 의한 강성의 변화에 기인한 변형량의 차이를 확인 할 수 있었으며, 자중의 효과를 반드시 고려하여야 함을 확인 할 수 있었다.

• 패션비즈니스
• /
• 제1권3호
• /
• pp.35-44
• /
• 1997

The purpose of this study is to the processes and quality of local women's apparel production using the stretch fabric and to address the problems related to production in order to provide useful data for producing competitive apparels. The result of the survey can be summarized as follows; 1. Results of surveying the process for raw materials and notions indicated that most of the workers were ignorant of the properties of stretch fabrics. And most factories were stacking the stretch fabrics across improperly, while being aware of the properties of the fabrics through their experiences or in-company test. 2. The major problem involving spreading fabrics was the uneven tension, followed by static electricity, overlap and warp twist. The problems involving the cutting work were melting of the fabric by cutter and difference of size between upper and lower parts. 3. Most of the businesses were not tempering the fabric before and after its linking works due to lack of working space, short delivery time, ignorance and etc. The majority of the sample businesses were operating their cutters at the speed of 3,000 rpm or higher, which suggests a poor technological guidance.