• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• The korean journal of orthodontics
• /
• v.10 no.1
• /
• pp.71-79
• /
• 1980

The purpose of this study was (1) to determine the prevalence of some causes by which dental occlusion might be affected , (2) to determine the prevalence of malocclusion, and types of molar, vertical incisor and horizontal incisor relationships, and (3) to examine the sex difference in the prevalence ratios, and (4) to determine the between-examiner differences in assessing types of dental occlusion. The material consisted of 1281 males and 811 females, total 2091 persons, aged 17 to 21 years. Two examiners who were graduate students in the orthodontic course, examined independently dental occlusion of the material. Before calculating the statistics, the subjects consisted of 156 mates and 164 females, total 320 persons, haying any one or more causes suspected to affect dental occlusion, was eliminated. Then the remained subjects, 1124 males and 647 females, total 1771 persons, were assessed. The results were as follows 1. The prevalence of some causes by which dental occlusion might be affected was 15.32 per cent. The missing rate of any one or more first molars was 8.85 percent, that of any one or more teeth positioned anterior to the first molar was 3.83 per cent. The prevalence of crossbite of the first molar was 0.48 per cent, that of retained primary teeth was 0.77 percent, and that of orthodontic treatment was 0.43 per cent. 8. The rate of between-examiner difference was 12.53 per cent in assessing the types of molar relationship, 18.86 percent in assessing the types of horizontal incisor relationship, and 26.37 percent in assessing the types of horizontal incisor relationship. 3. There was no sex difference in the prevalence ratios of the types of molar relationship. The prevalence of Class I molar relationship was 80.91 percent, that of Class II was 5,03, that of Class II subdivision was 4.01, Percent, that of Class III was 5.99 percent and that of Class III subdivision was 4.07 percent. 4. In the prevalence of the types of horizontal incisor relationship, there were no sex differences except that of Class II division 2. The prevalence of Class I horizontal incisor relationship was 73.12 percent, that of Class II division t was 12.03 percent, that of Class II division 2 was 6.58 percent in male and 4.33 percent in female, and that of Class III was 9.09 percent. 5. In the prevalence of the types of vertical incisor relationship, there were no sex differences except that of deep bite, The prevalence of open bite was 2.20 per cent, that of edge-to-edge bite was 9.15 percent, that of normal bite was 76,34 percent, and that of deep bite was 14.15 percent in male and 9.12 percent in female. 6. There was no sex difference in the prevalence of malocclusion the prevalence of malocclusion was 82.67 percent and that of normal occlusion was 17.33 percent. 7. There was a tendency that when Class I molar relationship changed to Class II, incisor relationships were to be larger overjet or upright upper incisors and deep bite, but when that changed to Class III molar relationship, these were to be cross bite and openbite.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.60-68
• /
• 2005

The evaluation of malocclusion has to be done quantitatively and qualitatively. This will be lead toward an analysis of malocclusion severity as well as treatment difficulty. The method of proper evaluation of malocclusion severity and treatment difficulty is necessary to assess treatment effect and efficiency for the orthodontists and to establish fundamentals for planning and executing the health-related policies in private and public institutions. The purposes of this study as the first part of the objective and quantitative analysis of malocclusion were 1) to measure treatment difficulty based on the opinions of several orthodontists. and 2) to investigate the relationships between objective malocclusion severity and subjective treatment difficulty 100 pairs of dental casts that had various types and severity of malocclusion were selected from the orthodontic departments of Kyurghee University and Samsung Medical Center The objective malocclusion severity was measured with the PAR (Peer Assessment Rating) index and the subjective treatment difficulty was evaluated by 8 experienced orthodontists. The relationships between objective malocclusion severity and subjective treatment difficulty were statistically evaluated. There were significant relationships between objective malocclusion severity and subjective treatment difficulty especially in the measurements of the upper anterior alignment, the buccal occlusion. the overjet, the overbite and the midline discrepancy en the malocclusion components. The results of this study can provide the background knowledge to develop a new occlusal index. which contains both the malocclusion severity and treatment difficulty for Korean orthodontists.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.69-81
• /
• 2005

As one of the variations in growth and development of the craniofacial complex. malocclusion shows lack of concordance In the recognition and severity of malocclusion for dentists as well as the acceptance and need of orthodontic treatment for the patient The purposes of this study were 1) to examine the relationships between objective malocclusion severity aid subjective treatment difficulty. 2) to evaluate the effect of malocclusion components to the subjective perceived difficulty of treatment. 3) to establish the weighted values of malocclusion components to reflect the treatment difficulty 100 pairs of dental casts with the general characteristics of malocclusion. were selected from the orthodontic departments of Kyunghee University and Samsuug Medical Center. The severity of malocclusion was evaluated by the author with the PAR index The perceived treatment difficulty and the estimated treatment duration on these dental models were evaluated by 8 experienced orthodontists. The relationships between the objective malocclusion severity and the subjective treatment difficulty were statistically evaluated. and the weighted values of malocclusion components to reflect treatment difficulty were statistically formulated. There were significant relationships between objective malocclusion severity and subjective treatment difficulty The malocclusion components which significantly affected the treatment difficulty and their weighted values in parentheses were as follows upper anterior alignment(1). overbite (2). buccal occlusion (3) middline (4), and overjet (5). This study Provides the fundamental principle to evaluate the objective malocclusion severity which is reflected by the subjective treatment difficulty of Korean orthodontists.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.839-853
• /
• 1998

The present study was performed to prove the relationship between CO-CR discrepancy and facial skeletal type. In this study, 242 subjects were randomly selected and devided into 9 groups(devided into class I, II, III by ANB and each one devided into dolicho-, brachy-, mesofacial skeleton by Ricketts' vertical index). Lateral cephalometric radiographs with the mandible in centric occlusion were taken and measured and CO and CR bites were registered on all subjects. Diagnostic casts were mounted on Panadent articulator using an estimated face-bow and centric relation bite registration. The amount and direction of CO-CR discrepancy present was recorded using a Condylar Position Indicator(CPI) and a centric occlusion wax bite registration. CPI measurements and cephalometric measurements were statistically analyzed. The finding of this study can be summerized as follows : 1. There is little correlation between right and left sides for magnitude or direction of CO-CR discrepancies. The correlation between the magnitude of CO-CR discrepancy of left A-P and right A-P is higher than that of left S-I and right S-I. 2. Correlation of Class II malocclusion group was higher than that of the other groups between the magnitude of CO-CR discrepancy of left CPI and right CPI. 3. There is no difference between the pattern of CO-CR discrepancy of 9 malocclusion groups. 4. There is very little, if any, correlation between Skeletofacial measurements and CO-CR discrepancy. 5. In Class II brachyfacial skeleton and Class III mesofacial skeleton there was Lateral cephalometric measurements by that we predict CPI measurements was detected. That was overbite, overjet, upper genial angle, lower genial angle, saddle angle, articular angle, convexity of point A, ANS-Me/Na-Me, PCBL/RH, Posterior FH/anterior FH.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.855-864
• /
• 1998

The purposes of this study were to evaluate the cephalometric characteristics of Korean female patients with Class II division 2 malocclusion and to compare Korean females with Caucasian females who had same type of malocclusion. All of the samples had Class II division 2 malocclusion with deep overbite (more than 4mm) and full permanent dentition. These samples were divided into two groups according to the races: Group 1(N=16; Korean females; average age=18Y 2M) and Group 2 (N:20; Caucasian females; average age=14Y 2M). The pretreatment lateral cephalograms were measured, analyzed and compared by using 38 variables and independent t-test. And the results were as follows: 1. Although there were no differences in Overbite, SN to mandibular plane angle, Palatomandibular plane angle, and FMA between Group 1 and 2, the other vertical relation variables of maxilla and mandible (SN to palatal plane angle, SN to occlusal plane angle, ODI) of Group 1 showed more clockwise rotation tendency of occlusal plane and less hypodivergency tendency than those of Group 2. 2. There were no differences in mandibular body length and ramus height between Group 1 and 2 except small upper genial angle of Group 1. There was less counterclockwise rotation tendency of mandible in Group 1. 3. There were no statistical significant differences in UAFH/LAFH and PFH/AFH between Group 1 and 2. 4. Although there were no differences of overjet and anteroposterior position of mandible between Group 1 and 2, the position of maxilla of Group 1 was more retropositioned than that of Group 2. 5. Except the more protrusion of lower incisor to A-Pog of Group 1, there were no differences of inclination and distance of upper and lower incisors to basal plane between Group 1 and 2. 6. The distance from upper- first molar to palatal plane showed no difference between Group 1 and 2. But the distance from lower first molar to mandibular plane of Group 1 was greater than that of Group 2. So it may be partially related to the clockwise rotation of occlusal plane and the less counterclockwise rotation tendency of mandible of Group 1. 7. Group 1 had more protrusive upper and lower lips than Group 2.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.175-183
• /
• 2000

The purpose of this study was to identify the compensatory adaptation of dentoalveolar structure according to the various skeletal relation through the statistical correlation between the anteroposterior, vertical skeletal and dentoalveolar relation. For this study, the sample were consisted of 101 adult subjects (51male and 50 female, mean age; male 23.6 years, female 21.5 years) who had good occlusion with the range of normal overjet and overbite and acceptable Angle's class I molar relationship which had not been related orthodontically The results were as follows : 1. Even though acceptable normal occlusion, the range of measurements which represent anteroposterior, vertical skeletal relation and dentoalveolar relation were very wide. 2. Upper and lower incisor axis were significantly correlated with anteroposterior skeletal relation, which means the mote lingual inclination of upper anterior teeth and the more labial inclination of lower anterior teeth according to the more anterior position of mandible to the maxilla (P<0.01). 3. Upper and 1ower anterior alveolar bone height was statistically correlated with the lower anterior vertical skeletal height. 4. Upper and 1ower alveolar bone height were not correlated with anteroposterior skeletal relation (P>0.05). 5. The correlation between the incisor axis and vertical skeletal was more closely related in upper anterior teeth than the lower anterior teeth. To summarize the above results, even though acceptable normal occlusion, skeletal and dentoalveolar relation was very widely ranged, and there were close relationship between the anteroposterior skeletal relation and the inclination of upper and lower anterior teeth and between the vertical skeletal relation and upper and lower anterior alveolar bone height. These finding can be concluded as compensatory adaptation to the different skeletal relationship.

• The korean journal of orthodontics
• /
• v.32 no.3 s.92
• /
• pp.195-207
• /
• 2002

Numerous studies have revealed the similarities and discrepancies in two divisions of class II malocclusion, since these malocclusion groups have been postulated to be disparate criterion, much as classified under one diagnostic umbrella. This study was undertaken to describe the craniofacial configurations of class II division 1 and 2, and consequently to discriminate the morphologic differences between the two malocclusion groups in Korean sample. Lateral headfilms of 34 class H division 1 and 29 division 2 were employed, while those of 142 adults of normal occlusion served as a control. The landmarks were digitized and 26 variables were statistically analyzed for one way ANOVA. 1. There manifested no statistically significant difference in maxillary position anteroposteriorly. Normal occlusion group exhibited most anteriorly positioned mandible, whereas class II division 1 showed the most retroposition. Class II division 1 disclosed clockwise rotation tendency of mandible, which resulted in position of the chin Posteriorly. 2. Class II division 1 showed greater in SN to MP, SN to PP significantly than other groups. 3. Class II division 2 showed smaller genial angle and larger mandibular body length than other groups. 4. Class II division 1 revealed greater anterior lower face height than other groups, whereas division 2 dictated significantly greater posterior face height. 5. Class II division 2 expressed the most retroclined lower incisor, while division 1 manifested the most proclination. The largest interincisal angle resided in Class II division 2 group. There were no significant differences in upper molar position anteroposteriorly.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.613-625
• /
• 1995

The purpose of this study was to investigate the degree of relapse following orthognathic surgery and the relationship between preoperative state and the methods of orthognathic surgery in skeletal Class III patients. Thirty-one patients were selected(17 men, and 14 women) for this study, who had received orthognathic surgery(20 one jaw surgery, and 11 two jaw surgery). The mean age was 22.5 years. Their lateral cephalograms, that were taken preoperatively, immediate postoperatively and follow-up over one year, were traced and analysed. The results were as follows : 1. In two jaw surgery, mandibular length, lower facial height and lower lip length were 4.24mm, 4.64mm and 4.13mm longer than in one jaw surgery, respectively But in two jaw surgery, overjet was 3.13mm shorter than in one jaw surgery. 2. In one jaw surgery, mandible was moved back $8.95\pm4.45mm$ at B point. In two jaw surgery, maxilla was moved forward $5.15\pm3.46mm$ and mandible was moved back $7.24\pm9.11mm$ at B point. 3. Between postoperation and follow-up over one year, A point, A' point, Pn and Sn were moved backward 1.02 $\pm$ 2.14mm, $1.73\pm1.63mm,\;1.05\pm1.48mm\;and\;1.55\pm1.37mm$ in two jaw surgery, respectively. 4. Between postoperation and follow-up over one year, in one jaw surgery, B point was moved forward $2.58\pm4.22mm$ and B' point was moved forward $1.95\pm4.39mm$. In two jaw surgery, B point was moved forward $0.65\pm2.88mm$ and B' point was moved forward $0.19\pm3.32mm$. In one jaw surgery, relapse rate was $28\%$ at B point and $24\%$ at B' point, whereas in two jaw surgery, relapse rate was $8\%$ at B point and $3\%$ at B' point.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.457-466
• /
• 1999

It has been reported that skeletal relapse and dental change after mandibular setback do occur not only after intermaxillary fixation(IMF) removal but also during IMF The side effects of skeletal relapse during IMF have clinical importance because they can cause many Postoperative orthodontic Problems. Generally, the Prevention of solid union between segments, compensatory tooth movement, anterior openbite, etc. have been cited as the side effects of jaw displacement. The purpose of this study was to evaluate the skeletal relapse and dental change during IMF. The material consisted of 28 patients who were treated by BSSRO(bilateral sagittal split ramus osteotomy), wire osteosynthesis, IMF for correction of mandibular prognathism. Through cephalometric analysis, the amount and direction of surgical movement, skeletal relapse and dental change during IMF were measured. The correlation between surgical movement and skeletal relapse, between skeletal relapse and dental changes were evaluated. The following conclusions were obtained; 1. Distal segment was repositioned backward and upward, proximal segment showed clockwise rotation during surgery. 2. During ]m, anterior portion of distal segment was displaced backward and posterior portion was displaced upward. Proximal segment was displaced upward with forward movement of p-Go(gonion of proximal segment). Backward surgical movement of p-GO was significantly correlated with forward displacement of p-Go. 3. Overjet and overbite were not changed during IMF. The compensatory tooth movements during IMF were characterized by retroclination of upper incisors md retroclination, extrusion of lower incisors. These compensatory tooth movements had statistically significant correlation with upward displacement of d-Go (gonion of distal segment).