• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1100-1106
• /
• 2009

General contractors' overhead costs are increasing relative to direct costs. However, it is difficult to apply the traditional activity-based costing directly to the construction site overhead costing because the resource consumption rate per each activity is varied depending on the attributes of activities. The research develops a methodology of hybrid cost allocation system when resources are assigned to cost objects unlike the traditional activity-based costing. The study also develops a database program and demonstrates how it can be applied to the construction projects using a case study.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.498-504
• /
• 1998

This paper presents an optimal control algorithm for the overhead crane. To control the swing motion and the position tracking of the payload of the overhead crane a state feedback control algorithm is applied. by using a hybrid genetic algorithm the feedback gains of the state feedback is optimized to minimize the cost function composed of position errors and payload swing angle under unknown constant disturbances. Computer simulation is performed to demonstrate the effectiveness of the proposed control algorithm.

• 한국통신학회논문지
• /
• 제38B권1호
• /
• pp.26-33
• /
• 2013

저전력, 저가의 초소형 기지국인 펨토셀은 heterogeneous network 의 중요 구성 요소 중 하나이다. 그러나 펨토셀 설치에 따른 셀 구조의 변화는 셀 간 간섭과 signaling overhead 증가와 같은 기술적인 문제를 야기할 수 있다. 이와 같은 기술적인 문제의 해결 방법 중 하나는 펨토셀이 SON(Self-Organized Network)과 같은 기법을 이용하여 자율적으로 전송전력을 조절하는 것이다. 펨토셀은 전송전력 조절을 통해 시스템 throughput을 향상시키거나 overhead를 감소시킬 수 있다. 일반적으로 시스템 throughput을 최대화하기 위한 펨토셀 전송 전력과 시스템 overhead 감소를 위한 펨토셀 전송 전력은 일치하지 않는다. 따라서 본 연구에서는 펨토셀이 시스템 overhead를 감소시키는 동시에 시스템 throughput을 향상시키도록 전송 전력을 조절하는 방법을 제안한다. 모의실험을 통해 제안 기법이 throughput만을 최대화하는 기법에 비하여 시스템 overhead를 41% 감소시키는 것을 확인하였다. 또한 커버리지만을 최적화 하는 기법에 비하여 throughput이 63% 향상되는 것을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권5호
• /
• pp.1829-1846
• /
• 2021

Transient faults occur in computation units of a processor, which can cause control flow errors (CFEs) and compromise system reliability. The software-based methods perform illegal control flow detection by inserting redundant instructions and monitoring signature. However, the existing methods not only have drawbacks in terms of performance overhead, but also lack of configurability. We propose a configurable approach CCFCA for detecting CFEs. The configurability of CCFCA is implemented by analyzing the criticality of each region and tuning the detecting granularity. For critical regions, program blocks are divided according to space-time overhead and reliability constraints, so that protection intensity can be configured flexibly. For other regions, signature detection algorithms are only used in the first basic block and last basic block. This helps to improve the fault-tolerant efficiency of the CCFCA. At the same time, CCFCA also has the function of solving confusion and instruction self-detection. Our experimental results show that CCFCA incurs only 10.61% performance overhead on average for several C benchmark program and the average undetected error rate is only 9.29%. CCFCA has high error coverage and low overhead compared with similar algorithms. This helps to meet different cost requirements and reliability requirements.

• 한국조리학회지
• /
• 제3권
• /
• pp.165-179
• /
• 1997

Cost-volume-profit analysis shows the relationship between these factors. The figures expressed in a break-even chart can be used planning control and decision making. The relation ships can also be helpful in understanding how all costs must be covered in menu pricing. Involved in these relationship is the contribution to overhead and profit, or contribution ratio. This study used the food service operation of H hotel. Assumed the FC would be 10% of the High Volume, the VC would be 76% of the high volume. And in the CVP of individual meals, selected labor cost of the VC, assumed labor cost would be 35% of the volume.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권1호
• /
• pp.9-15
• /
• 2001

This paper modelled the fail-safe control logic through the frequency coding input and designed the 3-out of-6 self checker using the error detect coding method of information redundancy. In addition, this paper also peformed the reliability parallel numeric analysis regarding single module between fail-safe. control logic module and TMR(Triple Modular Redundancy), therefore, we achieved the result that the fail-safe control logic increases a functional reliability because of decreasing system waste cost and functional overhead rather than the existing hardware redundancy method.

• Journal of Welding and Joining
• /
• 제29권3호
• /
• pp.58-63
• /
• 2011

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was compared with existing CP-type nozzle by TIG pulse welding in overhead position. As a result, CP-type occurs the wormholes in the overhead position, but the Venturi-type without the pore and formed a good bead appearance.

• 조명전기설비학회논문지
• /
• 제17권2호
• /
• pp.49-57
• /
• 2003

천정크레인 설비의 자동화에 사용될 수 있는 반진동 제어알고리즘을 제안하였다. 제안하는 제어알고리즘은 1) 복잡한 비선형계통 제어에 유용한 것으로 알려진 보상 FLC를 갖는 FCL, 2) 화물의 진동을 적게 하도록 가속도, 속도, 위치 기준 궤적을 발생하는 기준패턴발생기, 3) 속도, 위치 오차를 궤환하는 가속도 궤환제어기로 구성된다. 특히, 제안한 알고리즘은 화물의 진동각 정보를 제어에 활용하지 않으므로 고가의 진동각 센서가 필요 없다는 특징을 갖는다. 시뮬레이션에 의한 연구와 모형 크레인에 대한 실험 연구에 의해 제안하는 알고리즘의 유용성을 보인다.

• 한국멀티미디어학회논문지
• /
• 제18권12호
• /
• pp.1547-1554
• /
• 2015

Because there are numerous near field communication (NFC) technical standards and each standard has an independent communication protocol, an NFC software for controlling the protocols are significantly complicated. Especially, the anticollision algorithm for establishing the initial communication connection is classified into bit-oriented or time slot method according to the technical standards. Moreover, the anticollision algorithm is generally manipulated in software because of its complexity. In addition, since one host processor is shared by multiple modems in a connectivity SoC, embedding several communication modems with an NFC modem, the spare computing resources can be utilized for other modems by reducing the software cost to control the NFC modem. In this paper, we propose new design methods of the NFC modem for supporting anticollision, framing and bit rate detection in the hardware to reduce the software overhead. Therefore, the utilization of the NFC technology is enhanced in the connectivity SoC by minimizing the cost of software.

• 대한전자공학회논문지SD
• /
• 제42권12호
• /
• pp.91-102
• /
• 2005

최근의 저 전력 컴퓨터 시스템은 내장 프로세서의 성능 향상과 공정 기술의 발전을 통한 디바이스 크기 감소로 인해 전압 변동, 커플링 효과 등으로 인한 SEU(single event upset)로 모델링 되는 천이고장으로 인한 예기치 못한 동작 중 에러 발생가능성이 매우 높아지고 있다. 제안하는 방식은 프로세서가 처리하는 프로그램 분기 흐름상에서 에러를 검출하는 효과적인 watchdog 프로세서 구조로서, 기존 방식이 가지는 오버헤드를 줄이면서 프로그램 내부에서 빈번히 발생되는 루프를 매번 검사할 때, 동일한 동작을 watchdog 프로세서가 반복함으로써 생기는 비효율적인 메모리 접근, 버스 점유 경쟁등과 같은 추가적인 시스템 수준의 오버헤드를 줄이는 새로운 방법을 제안하였다. 본 논문은 기존의 실시간 분기 및 제어 흐름 연구에서는 다루지 않았던 루프 검출 및 예측 기능을 추가함으로써 실제 시스템 적용에 보다 적합한 비용 효율적인 구조를 제안하고 있다.