• 한국산업정보학회논문지
• /
• 제24권4호
• /
• pp.9-19
• /
• 2019

경량 임베디드 디바이스가 저전력 네트워킹뿐만 아니라 고정밀 센서 데이터 획득과 같은 영역에서 널리 활용되면서 소프트웨어 타이머에 대한 높은 시간정확성이 요구된다. 이 논문은 경량 MCU(Micro controller unit)를 장착한 임베디드 디바이스 환경에서 소프트웨어 타이머의 정확성 문제를 다룬다. 먼저, 소프트웨어 타이머의 전형적 구현 모델을 구현할 때 오차를 발생시키는 주요 오버헤드의 유형을 면밀히 분석한 후에 실제 환경에서 오버헤드를 측정한다. 이 오버헤드를 타이머 설정주기에 반영하는 오버헤드 보정 기법을 통해 소프트웨어 타이머의 정확성을 향상시킬 수 있다는 점을 검증한다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2019년도 추계학술대회
• /
• pp.188-190
• /
• 2019

Long-term global motion compensation (LT-GMC) was designed to compensate camera motion effectively. The LT-GMC warps a reference picture according to an estimated affine/homography model and stores it in its decoded picture buffer for long-term reference. Most previous works on LT-GMC have focused on improving quality of the warped picture, however, there has been only little consideration on the overhead of its motion coding. In this paper, we address this problem and propose a method, namely Scaling Predictor, to reduce the motion coding overhead for LT-GMC. Our experiment has shown BD-Rate reduction of 1.40% over conventional LT-GMC scheme by applying the proposed method.

• 인터넷정보학회논문지
• /
• 제11권5호
• /
• pp.27-35
• /
• 2010

본 논문에서는 평면 스크린을 사용할 수 없는 휴대형 프로젝터의 사용 환경에서 평면이 아닌 임의의 영사면(혹은 벽면)의 기하학적 형태에 의해 발생되는 영상의 기하학적 왜곡을 효과적으로 보정할 수 있는 방법을 제안한다. 제안한 방법에서는 먼저 격자패턴을 임의의 영사면에 영사한 후 영사면의 형태에 따라 왜곡된 격자패턴과 원본 격자패턴 간의 기하학적 관계를 나타내는 직선의 방정식을 도출한다. 다음으로 영사면의 기하학적 형태에 따라 적절하게 적용될 수 있는 원본 격자패턴의 크기를 결정하여 도출된 직선의 방정식으로부터 왜곡된 영상을 대칭적으로 보정할 수 있는 보정패턴을 생성한다. 최종적으로 프로젝터로부터 영사될 실제 영상을 격자패턴과 동일하게 분할하여 보정패턴에 맞게 미리 워핑(warping)함으로써 영사된 영상의 기하학적 왜곡을 보정한다. 제안한 방법의 성능 평가를 위하여 평면 스크린을 사용할 수 없는 영사 환경에서 자주 접할 수 있는 영사면 형태들인 기울어진 평면, 꺾인 평면 및 곡면을 대상으로 영사 영상 보정에 대한 실험을 진행하였다. 실험결과로부터 일반적으로 발생하는 몇 가지 영사면의 형태들에 인한 기하학적 왜곡들이 적절히 보정되어 제안한 방법이 영사 영상의 기하학적 왜곡을 매우 효과적으로 보정할 수 있음을 알 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제6권1호
• /
• pp.40-47
• /
• 2003

본 논문에서는 저해상도 대역에서의 움직임 벡터를 고려한 고해상도 대역의 영역에서 움직임 탐색을 행함으로써 밀-소 다중해상도 움직임 추정의 과도한 계산량을 줄일 수 있는 새로운 방법을 제안하였다. 또한 정확한 움직임을 찾아서 복원 영상의 화질을 높이기 위해 반화소 단위 움직임 추정을 사용하는데, 많은 계산량이 필요하게 된다. 따라서 본 논문에서는 인접 화소들간의 상관관계를 이용해 오차가 최소가 되는 방향을 예측하여 선택적 보간을 이용하여 계산량을 줄일 수 있었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 춘계학술발표대회
• /
• pp.495-497
• /
• 2013

Wireless sensor networks (WSNs) have emerged as an attractive and key research area over the last decade. Time synchronization is a vital part of infrastructure for any distributed system. In embedded sensor networks, time synchronization is an essential service for correlating data among nodes and communication scheduling. This is realized by exchanging messages that are time stamped using the local clocks on the nodes. Various time synchronization protocols have been proposed aiming to attain high synchronization accuracy, high efficiency and low communication overhead. However, it requires that the time between resynchronization intervals to be as large as possible to obtain a system which is energy efficient having low communication overhead. This paper presents a simple but effective skew compensation algorithm that measures the skew rate of the sensor nodes with respect to the reference node and calibrates itself to compensate for the difference in the frequencies of the nodes. The proposed method can be incorporated with any existing time synchronization protocol for WSNs.

• 한국통신학회논문지
• /
• 제29권2C호
• /
• pp.298-305
• /
• 2004

본 논문은 워드길이가 W 비트인 입력으로부터 W 비트를 출력하는 고정길이 modified Booth 곱셈기에 대한 오차보상 방법을 설명한다. 효율적으로 양자화 오차를 보상하기 위해 Booth 인코더의 출력정보를 이용하여 오차보상 바이어스를 생성한다. 절단된 부분이 양자화 오차에 미치는 영향에 따라 두 그룹(major or minor group)으로 나누고, 각 그룹에 서로 다른 오차보상 방법을 적용한다. 기존 방법과 비교하여 제안한 방법이 오차보상 바이어스를 생성하는 회로의 하드웨어 오버헤드는 비슷하면서 약 50％ 정도 양자화 오차가 적음을 시뮬레이션을 통해 보인다. 또한, 면적과 전력소모 면에서 제안한 고정길이 곱셈기가 이상적인 곱셈기 보다 약 40％ 정도 적게 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1173-1177
• /
• 2004

The high investment is necessary for the new high speed lines. So the KRRI was interested in the possibility of upgrading the existing line in order to speed up the train in the conventional lines. The tilting train system has been developed because the reconstruction of railway for the cant compensation costs very high. The purpose of the tilting system is to compensate the centrifugal acceleration in order to reduce the lateral acceleration of the passenger at high speed on the curves.The pantograph of the tilting train is indispensable in order to supply the electrification equipments with power in safe. The dynamic interaction between the pantograph and the overhead catenary system causes the variation of the contact force and the contact force variation can cause contact losses, arcing and sparking. If the spark happens between the pantograph and the overhead catenary system, the EMI(electro magnetic interface) and noises may occur. After all, the quality of current collection is deteriorated. This paper deals with the active control of pantograph and presents the LQ-servo controller to reduce the contact force variation.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.301-311
• /
• 2015

Objectives: Operators of overhead traveling crane in a ship assembly factory perform work to transmit large vessel blocks to an appropriate working process. Hazardous matters such as metal dusts, carbon monoxide, carbon dioxide, ozone, loud noise and fine particles are generated by variable working activities in the factory. The operators could be exposed to the hazardous matters during the work. In particular, welding fumes comprised of ultra fine particles and heavy metals is extremely hazardous for humans when exposing a pulmonary through respiratory pathway. Occupational lung diseases related to welding fumes are increasingly on an upward tendency. Therefore, the objective of this study is to assess properly unknown occupational exposure to the welding fumes among the operators. Methods: This study intended to clearly determine an equivalence check whether or not chemical constituents and composition of the dusts, which existed in the driver's cab, matched up with generally known welding fumes. Furthermore, computational fluid dynamics program(CFD) was used to identify a ventilation assessment in respect of a contamination distribution of welding fumes in the air. The operators were investigated to assess personal exposure levels of welding fumes and respirable particulate. Results: The dust in an operation room were the same constituents and composition as welding fumes. Welding fumes, which caused by the welding in a floor of the factory, arose with an ascending air current up to a roof and then stayed for a long time. They were considered to be exposed to the welding fumes in the operation room. The personal exposure levels of welding fumes and respirable particulate were 0.159(n=8, range=0.073-0.410) $mg/m^3$ and 0.138(n=8, range=0.087-0.178) $mg/m^3$, respectively. They were lower than a threshold limit value level($5mg/m^3$) of welding fumes. Conclusions: These findings indicate that an occupational exposure to welding fumes can exist among the operators. Consequently, we need to be keeping the operators under a constant assessment in the operator process of overhead traveling crane.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권10호
• /
• pp.593-601
• /
• 2003

Distance realy is tripped by the line impedance calculated at the relay point. Accordingly the accurate operation depends on the precise calculation of line impedance. Impedance can be accurately calculated in case of overhead line. However, in case of power cables or combined transmission lines, impedance can not be accurately calculated because cable systems have the sheath, grounding resistance, and sheath voltage limiters(SVLs). There are also several grounding systems in cable systems. Therefore, if there is a fault in cable systems, these terms will severely be caused much error to calculation of impedance. Accordingly the proper compensation should be developed for the correct operation of the distance relay. This paper presents the distance calculating algorithm in combined transmission line with power cable using wavelet transform. In order to achieve such purpose, judgement method to discriminate the fault section in both sections was proposed using D1 coefficient summation in db4. And also, error compensation value was proposed for correct calculation of impedance in power cables section.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.49-56
• /
• 1999

In this paper, the general formula of disparity estimation based on Bayesian Maximum A Posteriori (MAP) algorithm is derived. The generalized formula is implemented with the plane configuration model and applied to multiple baselined stereograms. The probabilistic plane configuration model consists of independence and similarity among the neighboring disparities in the configuration. The independence probabilistic model reduces the computation and guarantees the discontinuity at the object boundary region. The similarity model preserves the continuity or the high correlation of disparity distribution. In addition, we propose a hierarchical scheme of disparity compensation in the application to multiple-view stereo images. According to the experiments, the derived formula and the proposed estimation algorithm outperformed other ones. The proposed probabilistic models are reasonable and approximate the pure joint probability distribution very well with decreasing the computations to O(n(D)) from O(n(D)4) of the generalized formula. And, the hierarchical scheme of disparity compensation with multiple-view stereos improves the performance without any additional overhead to the decoder.